Be sure to obey the following information so as not to harm yourself or others or damage this instrument
or other external equipment.
Power adapter:
• Please use only the specified AC adapter supplied with the product. An incorrect or faulty
adapter can cause damage to the electronic keyboard.
• Do not place the AC adapter or power cord near to any source of heat such as radiators or
other heaters.
• To avoid damaging the power cord, please ensure that heavy objects are not placed on it
and that it is not subject to stress or over bending.
• Check the power plug regularly and ensure it is free from surface dirt. Do not insert or
unplug the power cord with wet hands.
Do not open the body of the electronic keyboard:
• Do not open the electronic keyboard or try to disassemble any part of it. If the device is not
functioning correctly, please stop using it and send it to a qualified service agent for repair.
Use of the electronic keyboard:
•To avoid damaging the appearance of the electronic keyboard or damaging the internal parts
please do not place the electronic keyboard in a dusty environment, in direct sunlight or in
places where there are very high or very low temperatures.
•Do not place the electronic keyboard on an uneven surface. To avoid damaging internal parts
do not place any vessel holding liquid onto the electronic keyboard as spillage may occur.
Maintenance:
• To clean the body of the electronic keyboard wipe it with a dry, soft cloth only.
Connection:
•To prevent damage to the speaker of the electronic keyboard please adjust the volume of any
peripheral device to the lowest setting and gradually adjust the volume accordingly to an
appropriate level once the music is playing.
During operation:
• Do not use the keyboard at the loudest volume level for a long period.
• Do not place heavy objects onto the keyboard or press the keyboard with undue force.
• The packaging should be opened by a responsible adult only and any plastic packaging should
be stored or disposed of appropriately.
Specification
•Specifications are subject to change without notice.
Page | 1
Contents
Important Information ................................................................................................................................... 1
Controls, Indicators and External Connections ............................................................................................ 4
Front Panel .............................................................................................................................................. 4
LED Display ............................................................................................................................................. 5
Preparation Before First Use ........................................................................................................................ 6
Power ....................................................................................................................................................... 6
Use of AC/DC power adapter: ............................................................................................................ 6
Power and Volume .................................................................................................................................. 9
Power control: ..................................................................................................................................... 9
Adjustment of the Master Volume: ...................................................................................................... 9
Tone ....................................................................................................................................................... 10
Tone Selection: ................................................................................................................................. 10
Effect & Control ...................................................................................................................................... 10
Fill in: ................................................................................................................................................. 14
Appendix I. Percussion Instruments ........................................................................................................... 19
Appendix II. Rhythm Table ......................................................................................................................... 20
Appendix III. Tone Table ............................................................................................................................ 20
Appendix IV. Demo Song Table ................................................................................................................. 21
Appendix V. Troubleshooting ..................................................................................................................... 21
Appendix VI. Chord Tables ......................................................................................................................... 23
Single Finger Chords ............................................................................................................................. 23
Please use the AC/DC power adapter that came with the electronic keyboard or a power adapter with DC
9V output voltage and 500mA output current with a centre positive plug. Connect the DC plug of the
power adapter into the DC 9V power socket on the rear of the keyboard and then connect the other end
into the mains wall socket and switch on.
USA / Canada UK
Caution:
socket.
Battery operation:
Open the battery lid on the underneath of the electronic keyboard and insert 6 x 1.5V Size D alkaline
batteries. Ensure the batteries are inserted with the correct polarity and replace the battery lid.
Caution:
going to be used for any length of time. This will avoid possible damage caused by leaking batteries.
Auto power off:
The keyboard has a power save function that switches the keyboard off after a period of not being played.
Press the power on / off button to switch back on.
Jacks and Accessories
Using headphones:
Connect the 3.5mm headphone plug into the [PHONES] jack on the rear of the keyboard. The internal
speaker will cut off automatically once headphones are connected. Headphones not included.
When the keyboard is not in use you should unplug the power adapter from the mains power
Do not mix old and new batteries. Do not leave batteries in the keyboard if the keyboard is not
Page | 6
3.5 mm PLUG
HEADPHONES
PHONES
PHONES
3.5 mm PLUG
AUDIO INPUT JACK
OF AMPLIFIER
AMPLIFIER
SPEAKER BOX
R IN L
Connecting an Amplifier or Hi-Fi Equipment:
This electronic keyboard has a built in speaker system but it can be connected to an external amplifier or
other hi-fi equipment. First turn off the power to the keyboard and any external equipment you are looking
to connect. Next insert one end of a stereo audio cable (not included) into the LINE IN or AUX IN socket
on the external equipment and connect the other end into the [PHONES] jack on the rear of the electronic
keyboard.
Connecting a phone or audio device to the AUX Input to play music through the keyboard:
This keyboard has a built-in speaker system that can be used to play music from your phone or mobile
device. Insert one end of a stereo audio cable into the AUX IN socket on the back of the keyboard and
connect the other end into your phone or audio device. Make sure the keyboard is switched on. Use the
volume control of the phone to control the music volume. AUX in cable not included.
Page | 7
AUX IN
Connecting a Microphone:
Connect the 3.5mm microphone plug into the [MIC] jack on the rear of the keyboard. Note that the
keyboard requires an electret or condenser microphone, not supplied.
MIC
Playing MP3 Music Files from a USB Memory Stick:
Insert the USB memory stick into the USB input at the rear of the keyboard. Press the PLAY/PAUSE key
to start and stop the music playback. Once the music has started playing you can skip forward and
backward through the MP3 tracks by pressing the control buttons. Adjust the volume of the music
playback with the VOL – and + keys. Use the keys on the keyboard to play along.
USBAUX IN PHONES DC IN 9VMIC
1
Page | 8
2
Keyboard Operation
Power and Volume
Power control:
Press the [POWER] button to turn the power on and again to turn the power off. The LED display will light
to indicate power on.
Adjustment of the Master Volume:
The keyboard has 16 levels of volume from V00(off) - V15. To change the volume, touch the [MAIN VOL
+/-] buttons. The volume level is indicated by the LED display. Pressing both the [MAIN VOL +/-] buttons
at the same time will make the Main Volume return to the default level (level V10). The main volume level
will revert to level V10 after power off and on.
Page | 9
Tone
Tone Selection:
When the keyboard is switched on the default TONE is ‘’000’’ Grand Piano. To change the tone, touch the
TONE button first and then directly put in the number code on the keypad by pressing the corresponding
digits 0-9. The tones can also be changed by using the + / - buttons. Refer to Appendix III for a list of the
available tones.
1
2
Effect & Control
Split Keyboard:
To switch on Split Keyboard mode press the [SPLIT] button, the LED will show [SPL].
The keyboard will split into two keyboards at the 24th key from the left. You can adjust the TONE of the
right hand side of the keyboard by pressing the corresponding digits 0-9 on the numerical keypad. The
TONE of the left hand side of the keyboard will remain set to the tone chosen before the Split Keyboard
mode was entered. In Split Keyboard mode the pitch of the left hand keys are raised by one octave and
the right hand keys lowered by one octave. Press the [SPLIT] button again to exit Split Keyboard mode.
SPLIT KEYBOARD
TONE 1TONE 2
DIVIDE POINT
Page | 10
Sustain:
Touch the [SUSTAIN] button to enter Sustain mode. The LED display will briefly display [SUS] to indicate
sustain is on. Once this mode is selected the sound of each note played is prolonged. Touching the
[SUSTAIN] button again will turn the sustain feature off and exit this mode.
NOTE: In order to use the sustain pedal included then make sure that the sustain mode is switched off
then press the sustain pedal to sustain individual notes as required.
Vibrato:
Touch the [VIBRATO] button to enter Vibrato mode. The LED display will briefly display [Vib]] to indicate
that vibrato is on. Once this mode is selected each time a note is played a trembling effect is added to the
end of the note. Touching the [VIBRATO] button again will turn the Vibrato feature off and exit this mode.
Transpose:
Touching the [TRANSPOSE +/-] buttons alters the musical scale of the note being played. You can adjust
the scale by 6 levels upwards or downwards. Pressing both the [TRANSPOSE +/-] buttons at the same
time will make the musical scale revert to 00. The transpose level will be reset to 00 after power off and
on.
Page | 11
Metronome:
Touch the [METRONOME] button to start the tick-tock beat. There are four beats to choose from.
Depending on what the performance needs, you can touch the [TEMPO + / -] buttons to speed up or slow
down. Press the [METRONOME] button repeatedly to cycle through to the required beat pattern. The LED
display will indicate the beat you have chosen. The metronome effect is added to the music once you start
playing. To exit this mode touch the [START/STOP] or [METRONOME] button again.
Panel Percussion Instruments:
When the [PERCUSSION] button is touched the keyboard’s keys turn into a percussion instrument, the
LED will show [PrC] to indicate percussion mode. Play the keyboard accordingly and the percussion
sounds will be heard. Touch the [PERCUSSION] button again to exit Percussion mode. Refer to Appendix
I. for a table of the 61 percussion sounds available.
Page | 12
1
PERCUSSION KEYBOARD AREA
2
Rhythm
Selecting the rhythm:
You can choose from any of the 200 built in rhythms. Please refer to the Appendix II. for the detailed
rhythm table. Touch the [RHYTHM] button to enter the rhythm selection function. The LED display will
show the current rhythm number. You can select the rhythm you require by pressing the corresponding
digits on the numerical keypad or by pressing the + / - buttons.
1
2
Start / Stop:
Touch the [START / STOP] button to play the rhythm. Touch the [START / STOP] button again to stop the
rhythm playback
Sync:
Touch the [SYNC] button to select the sync accompaniment function. Pressing any of the first 19 keys on
the left hand side of the keyboard will start the rhythm playing. Touch the [START / STOP] button to stop
the rhythm and exit the sync function.
Page | 13
CHORD AREA
Fill in:
You can fill in a length of interlude if you touch the [FILL] button during the rhythm playback. After the fill
in, the rhythm will continue playing as normal.
Accompaniment Volume Adjustment:
The Accompaniment Volume can be adjusted by pressing the [ACCOMP VOLUME +/-] buttons. The LED
display will show the volume as you are adjusting it. The adjustment range has 16 levels which are
displayed as 000 – 015 and indicated by the bars on the LED display. Pressing both the [ACCOMP
VOLUME +/-] buttons at the same time will make the Accompaniment Volume return to the default level
(level 010). The Main Volume control will also affect the output level of the accompaniment. At power on
the acccompaniment volume will reset to the default level.
Page | 14
Tempo Adjustment:
Touch the [TEMPO +/-] buttons to adjust the playing tempo of the rhythm, metronome and demo song.
The adjustment range is 30-240 bpm. Pressing both the [TEMPO +/-] buttons at the same time will make
the tempo revert to the default tempo for the rhythm selected. At power on the tempo will revert to 120
bpm.
Chord Accompaniment
Single Finger Chords:
Touch the [SINGLE] button to activate the single finger chord function. The LED screen will display [C-1]
Chords are played by pressing certain keys in the chord area on the left hand side of the keyboard (keys
1-19). The finger patterns required are shown in Appendix VI. Touch the [START / STOP] button to start
or stop the chord accompaniment. Press the [SINGLE] button again to exit single finger chord mode
Page | 15
CHORD AREA
Fingered Chords:
Touch the [FINGERED] button to activate the fingered chord function. The LED screen will display [C-2]
Chords are played by pressing certain keys in the chord area on the left hand side of the keyboard (keys
1-19). The finger patterns required are shown in Appendix VI. Touch the [START / STOP] button to start
or stop the chord accompaniment. Press the [FINGERED] button again to exit fingered chord mode. Note
that no sound will be produced unless the correct finger patterns are formed.
Intro / Ending
Touch the [INTRO / ENDING] button to enable the intro section. When the intro finishes playing,
accompaniment shifts to the main section. Touch [INTRO / ENDING] button again to enable the ending
section. When the ending is finished, the auto accompaniment stops automatically.
Recording Function
Touch the [REC] button to enter the recording mode. The LED will indicate that the recording function is
on by showing [rEC] on the LED display. Press any key to start recording. The maximum recording
capacity is 46 notes. When the recording capacity is full the LED display will show [FUL]. Each time you
touch the [REC] button, the previous memory will be cleared and the keyboard will enter the recording
mode again.
Touch the [PLAYBACK] button to play back the recorded notes.
Page | 16
Rhythm Programming
Press the [PROGRAM] button to activate the Rhythm Program mode. The LED will indicate that the
rhythm program function is on by showing [Pr9]. You can then play the keyboard and record your
percussion track (up to 46 percussion beats). To listen to your piece touch the [PLAYBACK] button and
the keyboard will playback your edited percussions. You can then play along to your recorded percussion.
You can also adjust the speed of the playback using the [TEMPO +/-] buttons. To cancel the Programming
mode, touch the [PROGRAM] button again.
1
2
Demo Songs:
Touch the [DEMO] button to play a demo song. The LED display will show [dXX] where XX is the number
of the demo song, from 00 to 39. By pressing the + and - button on the numerical keypad you can choose
the demo song you require. There are 40 demo songs to choose from in total. The keyboard will finish the
chosen song and then play the next song. Touch the [DEMO] button again to exit the demo mode. Refer
to Appendix IV. for a list of the available Demo songs.
Setting Memories M1 and M2
The keyboard has two built in memories for saving specific tones, rhythms, and tempos. Before
performing, select the TONE, RHYTHM and TEMPO you wish to use. While holding the [MEMORY]
button, press the [M1] or [M2] button, the LED display will show [S1] or [S2] and this will save the
keyboard settings to that memory. You can access the stored settings by touching the [M1] or [M2]
buttons before performing, the LED display will show [n1] or [n2]. Note that the M1 and M2 memories
will be cleared after the keyboard is switched off and back on again.
Page | 17
1
2
Teaching Modes
Beginner Course:
Touch the [TEACH 1] button to enter the Beginner Course teaching mode. This mode is suitable for
beginners to familiarise themselves with the rhythm and tempo of the song The LED display will show
[dXX] where XX is the number of the song selected, from 00 to 39 (refer to Appendix IV for the list of
songs). Use the keypad or + - keys to select the desired song. The beat point will flash on the LED display
to indicate the tempo. The LED display will indicate which key should be pressed, for example C 6. Use
the key stickers provided with the keyboard applied to the keys in order to know which key to press. The
keyboard will play the main melody in time with any key presses, even incorrect ones.
Advanced Course:
Touch the [TEACH 2] button to enter the Advanced Course teaching mode. This mode is suitable for more
advanced users. The LED display will show [d00] where XX is the number of the song selected, from 00 to
39 (refer to Appendix IV for the list of songs). Use the keypad or + - keys to select the desired song. The
beat point will flash on the LED display to indicate the tempo. The LED display will indicate which key
should be pressed, for example C 6. Use the key stickers provided with the keyboard applied to the keys
in order to know which key to press. The keyboard will play the main melody in time with any key presses.
Progressive Learning:
• In general, follow the sequence below to master any of the included songs.
• Listen to the song in DEMO mode to get an idea of the note timings and beat. When confident
move on to the next stage.
•Access the same song in Beginner Course mode (TEACH 1) and duplicate the note timings and
key presses. When mastered move onto the Advanced Course (TEACH 2).
Page | 18
Appendix I. Percussion Instruments
PERCUSSION KEYBOARD AREA
12345
5857605961
61 Percussion Sounds
Page | 19
Appendix II. Rhythm Table
No. Rhythm Name
No. Rhythm Name
00 Mambo
25
Lieder Mambo
01 16 Beat
26
Hard 8 Beat
02 Waltz
27
Country Bossanova
03 Rhumba
28
Hard Mambo
04 Reggae
29
Bluegrass Tango
05 Rock 30 South Country
06 Slow Rock
31
Lieder Pop
07 Bossanova
32
Bluegrass Beguine
08 Disco
33
Rock Latin
09 Tango
34
Slow March Polka
10 Country
35
Europe Samba
11 Pop 36 Jazz Swing
12 Beguine
37
POP 16 Beat
13 Latin 38 Country Pop
14 March Polka
39
Pattern Salsa
15 Samba
40
Mix 16 Beat
16 Swing
41
Lieder 16 Beat
17 8 Beat
42
Hard 16 Beat
18 Cha Cha
43
POP Rhumba
19 Salsa
44
Jazz Reggae
20 Brazil Mambo
45
Punk 16 Beat
21 POP 8 Beat
46
Mix Rock
22 PO
P Mambo
47
Pattern Bossanova
23 Smooth Country
48
Classical Waltz
24 POP Reggae
49-
199 Popular Rhythms
No. Tone Name
No. Tone Name
00 Piano
20 Koto FX
01 Vibraphone
21 Reed Organ1
02 Church Organ
22 Drawbar Organ Detuned
03
Reed Organ
23 Drawbar Organ Stereo
04 Electric Guitar1
24
Digital Piano
05 Electric Guitar2
25
The Strings
06 Electric Bass1
26
Sweet Harmonica
07 Synth Bass2
27
Synth Strings
08 Violin 28 Chorus Aahs
09 Orchestral Harp
29
Square Lead
10 String En
semble1
30
Mandolin
11 Soprano Sax
31
Sin Marimba
12 Clarinet
32
Bright Crystal
Page | 20
Appendix III. Tone Table
13 Flute 33 Lyric Crystal
14 Lead1
34
Reed Organ2
15 Alto Sax
35
Electronic Crystal
16 Crystal FX
36
Sweet Crystal
17 Rotary Organ
37
Psychedelic Synth Lead
18 String
38
Rock Organ
19 Soft Crystal
39-
199 Popular Tones
Appendix IV. Demo Song Table
No. Name of Song
No. Name of Song
00 The cherry
t
ree 20 Fur Elise
01 Brown
21
Mary ha
d a little lamb
02 The cherry
b
lossom
22
If you
’re happy and you know it
03 Come back
23
Dream wedding
04 Dream
24
He's got the
w
hole world in
h
is hands
05 Lambada
25 A m
aiden's
p
rayer
06 Mozart piano sonata
26
Spanish guitar
07 Let it go
27
Greensleeves
08 Passionate
28
Rainstorm
09 Music
box dancer
29
Bagpipe
10 Amaz
ing Grace
30
Classical concert
11 Flight of the
b
umble
bee 31
Imperial garden
12 Happy birthday to you
32
Carcassi e
tude,
o
p. 60,
n
o. 3
13 Twinkle twinkle l
ittle star
33
A state of mind
14 Canon
34
Italian polka
15 Four seas
ons spring
m
arch 35 The fountain
16 Heipanpo
36 Cuckoo waltz
17 Loch
Lomon
d 37 Clementine sonata
18 Red river valley
38
Chopin nocturnes
19 Serenade
- Haydn
39
Mozart sonata
k
284
Problem
Possible Reason / Solution
A
faint
noise
is heard
when turning the power on
or off.
This is normal and nothing to worry about.
not produce any sound
.
Appendix V. Troubleshooting
After turning the power on to the keyboard there
was no sound when the keys were pressed.
Page | 21
Check the master volume is set to the correct
volume. Check that headphones or any other
equipment are not plugged into the keyboard as
these will cause the built-in speaker system to
cut off automatically.
Check that fingered chord mode is not selected.
Incorrect key presses in fingered chord mode will
Sound is distorted or interrupted and
the
keyboard is not working properly.
Use of incorrect power adapter
. Use the power
There is a slight difference in timbre of some
This is normal and is
caused by the many
The
main volume or a
ccompaniment volume is
Check that the
main (master)
volume and
accompaniment volume.
The pitch of the note is not correct
Check t
hat the transpose is set to 00
.
The keyboard switches off unexpectedly
This is not a fault. The k
eyboard has a power
/ off button
to swit
c
h back on.
adapter supplied or the batteries may need
replacing.
notes.
When using the sustain function some tones
have long sustain and some short sustain.
not right.
In SYNC status the auto accompaniment does
not work.
different voice sampling ranges of the keyboard.
This is normal. The best length of sustain for
different tones has been pre-set.
accompaniment volume are set correctly. Note
that the main volume also affects the
Check to make sure that Chord mode has been
selected and then play a note from the first 19
keys on the left hand side of the keyboard.
save function that switches the keyboard off after
a period of not being played. Press the power on
Page | 22
Appendix VI. Chord Tables
C
D
D
E
E
F
F#
G
G#
A
B
B
mm7M7
Single Finger Chords
Page | 23
Fingered Chords
Page | 24
Appendix VII. Technical Specification
•Display
LED Display, 3-Digit
• Tone
200 tones
• Rhythm
200 rhythms
• Demo
40 different demo songs
• Effect and Control
Split keyboard, Sustain, Vibrato, Transpose
• Recording and Programming
46 Note record memory, Playback, 46 Beat rhythm programming
• Percussion
12 different instruments
• Accompaniment Control
Start / Stop, Sync, Fill in, Intro/Ending, Tempo
• Intelligent Teaching
Metronome, 2 Teaching modes
• External Jacks
Power input, Headphone output, Microphone Input (Electret), AUX Input, USB MP3 playback
• Diapason (Range of Keyboard)
C2- C7 (61 keys)
• Intonation
<3cent
• Weight
3.1 kg
• Power Adapter
DC9V, 500mA
• Output Power
2 W x 2
• Accessories included
Power adapter, Sheet music stand, User guide, Key stickers
Page | 25
FCC Compliance Statement
FCC Class B Part 15
This device complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is
subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired
operation.
CAUTION:
Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause
interference harmful to radio communications.
There is no guarantee, however, that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio or TV technician for help.
Product Disposal Instructions (European Union)
The symbol shown here and on the product, means that the product is classed as
Electrical or Electronic Equipment and should not be disposed with other household or
commercial waste at the end of its working life. The Waste Electrical and Electronic
Equipment (WEEE) Directive (2012/19/EU) has been put in place to encourage the
recycling of products using best available recovery and recycling techniques to minimise
the impact on the environment, treat any hazardous substances and avoid the increase of landfill. When
you have no further use for this product, please dispose of it using your local authority’s recycling
processes. For more information please contact your local authority or the retailer where the product was
purchased.