Rockford Fosgate R1S410, R1S412 User Manual

10" 12"
SVC - S
-
R1
Date of Purchase:
Installation & Operation
4-Ohm R1S410 R1S412
Serial Number:
Rockford Corporation offers a limited warranty on Rockford Fosgate products on the following terms:
LIMITED WARRANTY STATEMENT
Length of Warranty
Speakers – 1 Year. Any Factory Refurbished Product – 90 days (receipt required)
This warranty applies only to Rockford Fosgate products sold to consumers by Authorized Rockford Fosgate
What is Covered
not by Rockford Corporation.
Authorized Rockford Fosgate Dealer in another country are covered only by that country’s Distributor and
Dealers in the United States of America or its possessions. Product purchased by consumers from an
Who is Covered
vers only the original purchaser of Rockford product purchased from an Authorized
ranty co
Rockford Fosgate Dealer in the United States.In order to receive service, the purchaser must provide
This war
Rockford with a copy of the receipt stating the customer name,dealer name,product purchased and date of
purchase. Products found to be defective during the warranty period will be repaired or replaced
(with a product deemed to be equivalent) at Rockford's discretion.
What is Not Covered
1. Damage caused by accident, abuse,improper operations,water, theft, shipping
2.Any cost or expense related to the removal or reinstallation of product
anties arr
W
4.Any product which has had the serial number defaced, altered, or removed
3. Service performed by anyone other than Rockford or an Authorized Rockford Fosgate Service Center
7.Any product not purchased from an Authorized Rockford Fosgate Dealer
5. Subsequent damage to other components
6.Any product purchased outside the U.S.
warranty, so this limitation may not apply. No person is authorized to assume for Rockford Fosgate any other
Any implied warranties including warranties of fitness for use and merchantability are limited in duration to the
period of the express warranty set forth above. Some states do not allow limitations on the length of an implied
Limit on Implied
liability in connection with the sale of the product.
Contact the Authorized Rockford Fosgate Dealer you purchased this product from.If you need further
How to Obtain Service
of product to Rockford.
Authorization number) to return any product to Rockford Fosgate.You are responsible for shipment
assistance, call 1-800-669-9899 for Rockford Customer Service.You must obtain an RA# (Return
EU Warranty
Rockford Corporation
Rockford Fosgate
600 South Rockford Drive
Tempe, Arizona 85281 U.S.A.
ent EU warranty requirements,see your Authorized dealer for details.
r
oduct meets the cur
This pr
dfosgate.com or
ockf .r
In U.S.A., (480) 967-3565
www
Customer Service 1-800-669-9899
Printed in China
d Corporation. or
All rights reserved.
d Corporation. or
2009 Rockf
ed trademarks or trademarks of Rockf
egister
r
Rockford Fosgate, the Rockford Fosgate logo, and the PRIME logo are either
12/2008 B.M.
12/2008 E.R.
1230-55703-01
SAFETY
H
W
D
SEALED ENCLOSURES
CAUTION: Before installation, disconnect the battery
negative (-) terminal to prevent damage to the unit, fire and/or possible injury.
PRACTICE SAFE SOUND™
uous exposure to sound pressure levels over 100dB may
Contin
cause permanent hearing loss. High powered auto sound systems
y produce sound pressure levels well over 130dB. Use common
ma
sense and practice safe sound.
CARTON CONTENTS
(1) Prime R1 Series Subwoofer
RECOMMENDED ENCLOSURES
SEALED ENCLOSURES
Sealed enclosures are the simplest to build.The most important part of building a sealed enclosure is to make sure that the enclosure is airtight. Using glue and some type of sealant on all seams will ensure solid construction and pr performance of the speaker. Larger enclosures will provide flatter response and deeper bass where smaller boxes will provide a bump in the response curve and generally higher output for greater SPL.
Advantages of sealed enclosures:
Small enclosures
Linear (Flat) response
No port noise
High power handling at all frequencies
Excellent for sound quality
Extended low frequency output when compared to vented enclosures
BUILDING AN ENCLOSURE
To work properly, the walls of the enclosure must be rigid and not flex when subjected to the high pressures generated by the speaker's operation. For optimum performance, we recommend using 3/4" MDF (Medium Density Fiberboard) and internal bracing.The enclosure should be glued together and secur
CALCULATING VOLUME
Calculating volume is merely a matter of measuring the dimensions in inches and using the formula: H x W x D divided by 1728 (cubic feet). See block below.
event air leaks.The box volume will directly impact the
ed with nails or screws.
*NOTE: Vb is NET volume (internal volume needed for
oofer). Speaker, bracing and/or port displace-
w ment should be added to this volume. External
dimensions are based on 3/4" (1.90cm) MDF.
NOTE: When using enclosures other than recommended, con-
tact RFTECH Support for correct application.
Optimum Sealed Enclosure Recommendation
SEALED ENCLOSURES 10" 12"
Vb* Internal Volume cu.ft. (Liter) 0.75 (21.24) 1.02 (28.88)
F3-3dB Point (Hz) 50.9 43.5
Qtc Enclosure Damping 0.875 1.097
H Height-inch (cm) 14 (35.56) 14 (35.56)
W Width-inch (cm) 17 (43.18) 18 (45.72)
D Depth-inch (cm) 8.25 (20.96) 10 (25.40)
R1S410 R1S412
Recommended Sealed Enclosure Volume Range
SEALED ENCLOSURES 10" 12"
R1S410
VbVolume Range cu. ft. 0.50 to 0.85 0.70 to 1.80
(Liter) (14.16 to 24.07) (19.82 to 50.97)
R1S412
"
Box Volume Height
Divided b
o facing sides ar
If tw
o to tak
tw without the necessity of calculating the box in sections and adding the sections together.The thickness of the baffle material reduces the internal volume so this must be subtracted from the outside dimensions to determine the internal volume.The speaker itself also reduces the internal volume.The amount of air displaced by each model is listed on the specification sheet and should also be subtracted fr volume calculation.
y (cubic f
e the average. Using this number will give you the volume
eet) 1728
e of une
ven length, add them together and divide by
x Width
"
x Depth
om the gr
"
oss
FEATURES
Parabolic polypropylene cone.
12 AWG compression terminals.
18 gauge stamped steel frame. le in single 4 ohm.
vailab
A
Optimized for sealed enclosures.
SPECIFICA
PRIME R1-SVC 10" 12"
Nominal Impedance (ohms) 4 4Ω
Frequency Response 24Hz - 250Hz 22Hz - 250Hz
Voice Coil Diameter 1.5” (6-Layer) 1.5” (6-Layer)
Fs - Free Air Resonance 24 Hz 22 Hz
Qts 0.4 0.49
Vas - cu. ft. 3.0 6.89 (Liters) (85) (195)
Xmax 0.23” 0.25”
SPL (dB @ 1w/1m) 86 dB 87 dB
Power Handling (Watts) 150 Watts RMS 150 Watts RMS
2
TIONS
(3.8cm) (3.8cm)
(5.8mm) (6.3mm)
300 Watts Max 300 Watts Max
Specifications subject to change without notice
Loading...
+ 2 hidden pages