Rockford Fosgate R1-HD4-9813, Prime R1-HD2-9813 User Manual

Printed in China

041814

1230-58708-01

®

R1-HD4-9813

4-SPEAKER KIT

HARLEY-DAVIDSON

Serial Number: Date of Purchase:

Installation assistance availible at:

www.rockfordfosgate.com/rftech

Direct: [phone] • Toll Free: [phone]

ROCKFORDFOSGATE.COM

600 South Rockford Drive • Tempe, Arizona 85281 United States

32

Dear Customer,

Congratulations on your purchase of the world’s finest brand of car audio
products. At Rockford Fosgate we are fanatics about musical reproduc­tion at its best, and we are pleased you chose our product. Through
years of engineering expertise, hand craftsmanship and critical testing
procedures, we have created a wide range of products that reproduce
music with all the clarity and richness you deserve.

For maximum performance we recommend you have your new Rockford
Fosgate product installed by an Authorized Rockford Fosgate Dealer,
as we provide specialized training through Rockford Technical Training
Institute (RTTI). Please read your warranty and retain your receipt and
original carton for possible future use.

Great product and competent installations are only a piece of the puzzle
when it comes to your system. Make sure that your installer is using
100% authentic installation accessories from Rockford Fosgate in your
installation. Rockford Fosgate has everything from RCA cables and
speaker wire to power wire and battery connectors. Insist on it! After all,
your new system deserves nothing but the best.

To add the finishing touch to your new Rockford Fosgate image order
your Rockford accessories, which include everything from T-shirts to
jackets.

Visit our web site for the latest information on all Rockford products;

www.rockfordfosgate.com

or, in the U.S. call 1-800-669-9899 or FAX [phone]. For all other
countries, call +001-480-967-3565 or FAX [phone].

Table of Content

If, after reading your manual, you still have questions regarding this prod­uct, we recommend that you see your Rockford Fosgate dealer. If you need
further assistance, you can call us direct at 1-800-669-9899. Be sure to
have your serial number, model number and date of purchase available
when you call.

Safety

This symbol with “WARNING” is intended
to alert the user to the presence of important
instructions. Failure to heed the instructions
will result in severe injury or death.

This symbol with “CAUTION” is intended to
alert the user to the presence of important
instructions. Failure to heed the instructions
can result in injury or unit damage.

•To prevent injury and damage to the unit, please read and follow the
instructions in this manual. We want you to enjoy this system, not get
a headache.

•If you feel unsure about installing this system yourself, have it installed
by a qualified Rockford Fosgate technician.

•Before installation, disconnect the battery negative (-) terminal to
prevent damage to the unit, fire and/or possible injury.

Introduction

Specications

©2014 Rockford Corporation. All Rights Reserved. ROCKFORD FOSGATE and associated logos where applicable are registered trademarks of Rockford
Corporation in the United States and/or other countries. Ultra Classic®, Electra Glide®, Street Glide®, Tri Glide®, Road Glide®, Road Glide Ultra®, CVOTM and
Harley-Davidson® are registered trademarks of Harley-Davidson, Inc, and if used or implied are for reference only. There is no affiliation between Harley­Davidson, Inc., and Rockford Corporation. All other trademarks are the property of their respective owners. Specifications subject to change without notice.

PRACTICE SAFE SOUND

Continuous exposure to sound pressure levels over 100dB may cause

permanent hearing loss. High powered auto sound systems may

produce sound pressure levels well over 130dB. Use common sense

and practice safe sound.

2 Introduction

3 Specifications

4-5 Design Features

6

Wiring Diagram

7

Installation Considerations

8-10 Installation

Ultra Classic

®

Electra Glide

®

Street Glide

®

Tri Glide

®

11-13 Installation

Road Glide

®

Road Glide Ultra

®

14-15 Installation

All Models

16 Warranty

Model

R1-HD4-9813

Description 4-Channel

Watts Per Channel (RMS) 40W X 4

Crossover Frequency Fixed

Frequency Response 80Hz-16kHz

Level Control -3dB, 0dB, +3dB

Fuse Rating 15A

Nominal Diameter 5.25” (133 mm)

Description 2-Way

Nominal Impedance 2Ω

Sensitivity (1W/1M 88dB

illus.-1.1

3.87in

(98.3mm)

5.24in

(133.0mm)

2.46in

(62.5mm)

2.10in

(53.3mm)

4.61in

(117.1mm)

1.4in

(36.0mm)

8.6in

(219.6mm)

4.2in

(107.4mm)

54

Design Features

illus.-2.1

Design Features

4-Channel Amplifier

Fan cooled 4-channel amplifier.

Amplifier Mounting Bracket

The bracket is to be used on Road Glide® and Road Glide
Ultra® motorcycle fairings only. It mounts to the brake side
turn signal bracket.

2-Way Speaker

This Factory (OEM) Direct Fitment speaker installs into the
factory speaker grilles. No adapter is needed.

Level Control

Recommended level should be set to -3dB. The level should
be set prior to amplifier installation. Some installations do
not allow for level adjustment access when mounted to the
motorcycle.

High-Level Input Harness Connector

Black, 8-pin socket accepts the High-Level Input Harness

4/2 Channel Switch

The amplifier needs to be switched to the 4-channel position
to utilize the factory fader control on the radio.

Speaker Output Harness Connectors

Black, 4-pin socket accepts front Speaker Output Harness
along with the white, 4-pin rear Speaker Output Harness.

Pass-Thru Connector

Accepts additional Rockford amplifier.

Rubber Amplifier Pad

The rubber amplifier pad is used on Ultra Classic®, Electra

Glide®, Street Glide® and Tri Glide® motorcycle fairing

applications that have the communication module mounted to
the top of the radio.

Power Harness Connector

White, 8-pin socket accepts the Power Harness.

Speaker Output / Input Harness (Rear)

White, 8-pin harness plugs directly into the white, 8-pin
socket on the harness routed to the rear of the motorcycle.

Speaker Output Harness (Front)

Black, 4-pin harness plugs into the black, Front Speaker
Output 4-pin socket on the amplifier.

Power / High-Level Input Harness

The black, 8-pin connector plugs into the black, 8-pin sockets
labeled “Power” on the amplifier. The smaller white, 4-pin
connector plugs into the white, 4-pin socket labeled “Rear” on
the amplifier. The remaining larger connector plugs into the
wire harness socket

Standard Spade Connector

The spade terminals accept both 1/8” (negative) and 1/4”
(positive) connectors from the new Speaker Output Harness.

Grille Badge

Adhesive backed Rockford Fosgate badges attach to the
factory speaker grill. (Ultra Classic®, Electra Glide®, Street

Glide® , Tri Glide® Only)