Rockford Fosgate 200M User Manual

200M

Installation &
Operation

Installation et fonctionnement
Instalación y funcionamiento
Einbau und Betrieb
Installazione e funzionamento

Mono Amplifier

INTRODUCTION

TABLE OF CONTENTS

2

Dear Customer,

Congratulations on your purchase of the world's finest brand of car audio amplifiers. At Rockford
Fosgate we are fanatics about musical reproduction at its best, and we are pleased you chose our
product. Through years of engineering expertise, hand craftsmanship and critical testing procedures,
we have created a wide range of products that reproduce music with all the clarity and richness you
deserve.

For maximum performance we recommend you have your new Rockford Fosgate product installed
by an Authorized Rockford Fosgate Dealer, as we provide specialized training through Rockford
Technical Training Institute (RTTI). Please read your warranty and retain your receipt and original
carton for possible future use.

Great product and competent installations are only a piece of the puzzle when it comes to your
system. Make sure that your installer is using 100% authentic installation accessories from
Connecting Punch in your installation. Connecting Punch has everything from RCA cables and
speaker wire to Power line and battery connectors. Insist on it! After all, your new system deserves
nothing but the best.

To add the finishing touch to your new Rockford Fosgate image order your Rockford accessories,
which include everything from T-shirts and jackets to hats and sunglasses.

To get a free brochure on Rockford Fosgate products and Rockford accessories,
in the U.S. call 480-967-3565 or FAX [phone].
For all other countries, call +001-480-967-3565 or FAX [phone].

PRACTICE SAFE SOUND™

Continuous exposure to sound pressure levels over 100dB may cause permanent

hearing loss. High powered auto sound systems may produce sound pressure

levels well over 130dB. Use common sense and practice safe sound.

Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2

Safety Instructions . . . . . . . . . . . . . . . . . . . 3

Design Features . . . . . . . . . . . . . . . . . . . . . 4

Installation . . . . . . . . . . . . . . . . . . . . . . . 4-7

Installation Considerations . . . . . . . . . . . 4

Mounting Locations. . . . . . . . . . . . . . . . 5

Battery and Charging . . . . . . . . . . . . . . . 6

Wiring the System . . . . . . . . . . . . . . . . . 6

Using Passive Crossovers . . . . . . . . . . . . 7

NOTE: Review each section for more detailed information.

If, after reading your manual, you still have questions regarding this product, we recommend that
you see your Rockford Fosgate dealer. If you need further assistance, you can call us direct at 1-800­669-9899. Be sure to have your serial number, model number and date of purchase available when
you call.

The serial number can be found on the outside of the box. Please record it in the space provided
below as your permanent record. This will serve as verification of your factory warranty and may
become useful in recovering your source unit if it is ever stolen.

Serial Number: _________________________________________
Model Number: ________________________________________

Operation. . . . . . . . . . . . . . . . . . . . . . . . . . 8

Adjusting Gain . . . . . . . . . . . . . . . . . . . 8

Adjusting Crossover Frequency . . . . . . . 8

Accessories. . . . . . . . . . . . . . . . . . . . . . . . . 8

Troubleshooting . . . . . . . . . . . . . . . . . . . . . 9

Specifications . . . . . . . . . . . . . . . . . . . . . . 10

Limited Warranty Information. . . . . . . . . . 11

International Instructions . . . . . . . . . . . . . 12

SAFETY INSTRUCTIONS

CONTENTS OF CARTON

3

Visit our web site for the latest information on all Rockford products.

GETTING STARTED

Welcome to Rockford Fosgate! This manual is designed to provide
information for the owner, salesperson and installer. For those of you who want quick information
on how to install this product, please turn to the Installation Section of this manual. Other
information can be located by using the Table of Contents. We, at Rockford Fosgate, have worked
very hard to make sure all the information in this manual is current. But, as we are constantly
finding new ways to improve our product, this information is subject to change without notice.

www.rockfordfosgate.com

This symbol with “WARNING” is intended to alert the user to the
presence of important instructions. Failure to heed the
instructions will result in severe injury or death.

This symbol with “

CAUTION” is intended to alert the user to the

presence of important instructions. Failure to heed the
instructions can result in injury or unit damage.

CAUTION: To prevent injury and damage to the unit, please read and follow the

instructions in this manual. We want you to have enjoyment from this
system, not a headache.

CAUTION If you feel unsure about installing this system yourself, have it installed

by a qualified Rockford Fosgate technician.

CAUTION Before installation, disconnect the battery negative (-) terminal to

prevent damage to the unit, fire and/or possible injury.

!

!

!

Model 200M Mono Amplifier
Installation & Operation Manual
Mounting Hardware Kit

1 High Level Input Harness
1 Fuse Connector
1 15 Amp Fuse

4

DESIGN FEATURES

INSTALLATION

1. Cast Aluminum Heatsink – The cast aluminum heatsink of the Punch amplifier dissipates heat

generated by the amplifier's circuitry. The inherent advantage of casting provides a 30%
improvement of cooling over conventional extrusion heatsink designs.

2. Variable Crossover – The amplifiers have a built-in 12dB/octave Butterworth filter with a

crossover point variable from 50Hz to 210Hz. The crossover can be set to Low-Pass (LP) or it
can be bypassed by setting it to All-Pass (AP).

3. RCA Input Jacks – The industry standard RCA jacks provide an easy connection for signal level

input. They are gold-plated to resist the signal degradation caused by corrosion.

4. Gain Control – The input gain control is preset to match the output of most source units. It can

be adjusted to match output levels from a variety of source units.

5. LED Power Indicator – The LED illuminates when the unit is turned on.

6. REM Terminal – This spade terminal is used to remotely turn-on and turn-off the amplifier when

+12V DC is applied.

7. Power Terminals – The power and ground connectors on the Punch amplifier are gold-plated

and will accommodate up to 8 AWG wire maximizing the input current capability of the
amplifier.

8.

High Level Inputs – The high level inputs use a detachable connector terminated with 20 AWG
leads. These inputs should be used if the source unit has only speaker line (high level) outputs
and not RCA outputs.

9. Punch Bass – The Punch Bass control helps correct for acoustical deficiencies in the listening

environment by helping produce full range sound without adding excessive boost.. The Punch
Bass control is a narrow band adjustment at 45Hz switchable from 0dB to +6dB to +12dB.

10. Speaker Terminals – The heavy duty, gold-plated terminal block connectors (+ and –) will

accept wire sizes from 8 AWG to 18 AWG. These gold-plated connectors are immune to
corrosion that can cause signal deterioration.

INSTALLATION CONSIDERATIONS

The following is a list of tools needed for installation:

Volt/Ohm Meter
Wire strippers
Wire crimpers
Wire cutters
#2 Phillips screwdriver
Battery post wrench

Hand held drill w/assorted bits
1/8" diameter heatshrink tubing
Assorted connectors
Adequate Length—Red Power Wire
Adequate Length—Remote Turn-on Wire
Adequate Length—Black Grounding Wire