RocketFish RF-G1182 User Manual
Two-way HDMI Splitter
Package contents
• HDMI splitter
• AC power adapter
• Quick Setup Guide
You will need:
• High-speed HDMI cables
Front
Features
• Sends HDMI A/V signals from a single source,
such as a Blu-ray/DVD player, set-top box, to
two destinations, such as a TV and A/V receiver.
• Supports full 1080p video resolution
• Supports 3D video
• Compatible with most TV and PC monitor
video resolutions
HDMI splitter basics
This Rocket sh two-way HDMI splitter will send the HDMI audio and video signals
from a single source, such as a Blu-ray/DVD player or cable/satellite box, to two
destinations, such as a TV and A/V receiver. It is ideal for sending the audio signals
from a 3D Blu-ray player to an A/V receiver that does not support 3D video passthru.
Setting up your HDMI splitter
1 Connect one end of a high-speed HDMI cable (not included) to your video
source and the other end to the IN port on the HDMI splitter.
2 Connect another high-speed HDMI cable to your HDMI splitter’s OUT 1 port to
an HDTV.
3 Connect another high-speed HDMI cable to your HDMI splitter’s OUT 2 port to
an A/V receiver.
4 Connect the included AC adapter from the DC jack on the HDMI splitter to a
standard 110/120V AC outlet. Power on all connected devices and operate per
the manufacturer’s instructions.
Connecting a TV and A/V receiver to a single HDMI source
HDMI video source
Power LED
Back
RF-G1182
HDMI IN port DC power 5V/1A connectorHDMI
OUT 1 port
HDMI
OUT 2 port
QUICK SETUP GUIDE
HDMI IN
HDMI splitter
HDMI OUT1
A/V receiver
HDMI OUT2
HDTV
Troubleshooting
Symptom Possible solution
LED is not ON
or lit
No video and/or
audio
Video has some
noise
1 Make sure that the HDMI splitter’s power adapter is plugged in.
2 Make sure that the video device or TV’s power cord is plugged in.
1 Make sure that your DVD movie is original. HDMI includes HDCP
copy protection, which prevents playback of illegally copied
movies.
2 Make sure that the HDMI cable is not broken and is securely
connected.
3 Make sure that the audio and video formats of the content being
used (i.e., Blu-ray disc) are supported by all connected devices.
4 Make sure that your destination components (i.e., TV and A/V
receiver are set to the HDMI inputs with which the splitter’s
HDMI outputs are connected.
5 Make sure that you are using high-speed HDMI cables for
all connections. We recommend high-quality Rocket sh HDMI
cables, available at your local Best Buy or Future Shop stores in
lengths from 4 to 24 feet.
6 Unplug the HDMI splitter’s AC power adapter, then plug it back
in again.
NOTE: If using with two TVs or monitors, connect the TV with
the lowest resolution to the OUT 1 port to make sure video is
displayed on both TVs. The splitter uses the resolution, timing
information, and audio formats of the TV with the lowest
resolution for both TVs
1 Make sure that you are using high-speed HDMI cables for
all connections. We recommend high-quality Rocket sh HDMI
cables, available at your local Best Buy or Future Shop stores in
lengths from 4 to 24 feet.
2 Make sure that the TV’s video resolution supports the video
source’s output resolution.
Speci cations
HDMI version 1.4A
Video ampli er bandwidth 225 MHz / 6.75 Gbps
Single link range 480i to 1080p from source device
Vertical frequency range 25 Hz to 60 Hz
HDMI input connector HDMI Type A (1)
HDMI output connector HDMI Type A (2)
HDMI HDCP compliant Pass HDCP data between source and monitor
Power consumption 5 Watts (maximum)
Power supply 5VDC/1000 mA
Dimensions 5.19 × 3.39 × 0.98 in. (130 × 86 × 25 mm)
Shipping weight .82 lb (.372 kg)
One-year limited warranty
Visit www.rocket shproducts.com for details.
Contact Rocket sh:
For customer service call 1-800-620-2790
www.rocket shproducts.com
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Rich eld, MN 55423-3645 USA
© 2010 BBY Solutions, Inc., All Rights Reserved. ROCKETFISH is a trademark of BBY Solutions, Inc.
All other products and brand names are trademarks of their respective owners.
ENGLISH 10-0882
Loading...