RocketFish RF-CARMNT2 User Manual

RF-CARMNT2 I iPad 2 Car Mount

s

Quick Setup Guide

General description

Congratulations on your purchase of the iPad 2 car mount. The iPad car
mount securely holds your iPad 2 for use or display.

Setting up the car mount

1 Open the stand locks.

4 Slide the brackets through the headrest posts.

Package contents

Sleeve Stand with base pre-installed

5 Close the stand’s locks.

2 Lift the headrest on the front seat.

6 Close the stand locks.

3 Rotate the brackets to an angle that will allow the brackets t through

the headrest posts.

7 Put your iPad 2 into the sleeve by placing

the bottom of your iPad 2 into the
bottom of the sleeve, then
pressing the top of your iPad 2
into the sleeve.

8 While pressing the latches on the stand, slide the sleeve into the stand.

s

the

in p

lace

able

es i

9 The stand rotates for 90° viewing your iPad 2 vertically or horizontally.

Caution: Be very careful and make sure the sleeve is securely mounted

to the stand before releasing it.

To release the sleeve:

• While pressing the latches on the stand, pull the sleeve away from the
stand.

Caution: Be very careful and make sure the sleeve is securely mounted to

the stand before releasing it.

Cable management:

• Plug the charging cable into the 30-pin slot. Clips also help to hold
charging cable and headphone cables in place while on the move.

30pin

30pin

One-year limited warranty

Visit www.rocketshproducts.com for details.

Contact Rocketsh:

For customer service please call 1-800-620-2790
www.rocketshproducts.com

Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richeld, Minnesota, 55423-3645 USA
© 2011 BBY Solutions, Inc. All rights reserved. ROCKETFISH is a trademark of BBY
Solutions, Inc. All other products and brand names are trademarks of their
respective owners.

ENGLISH 11-0499