RocketFish RF-BTHP01 User Manual
Bluetooth Stereo Headset
RF-BTHP01
QUICK SETUP GUIDE
Congratulations on your purchase of the Rocketfish
Mobile Bluetooth Stereo Headset. Listen to music
wirelessly with Bluetooth audio devices and answer
phone calls hands-free. You can use the headset to answer
and make calls and to play music stored on your
Bluetooth-enabled device.
Featur es
Power/Talk
button
Volume –
Volume +
button
button
Package contents
• Bluetooth stereo headset
• AC power adapter
• USB charging cable
• Quick Setup Guide
Turning the headset on and off
• To turn the headset on or off, press and hold
the Power button for three seconds.
Pairing the headset
1 Turn off the headset, then press and hold Talk for
six seconds. Pairing mode is activated.
2 On your device, select RF-BTHP01 from the list of
discovered Bluetooth devices, then enter the
password 0000 to pair the headset.
Note: After your headset has been successfully paired
with your device, the headset will automatically
connect to your device the next time the headset is
turned on.
LED
Speakers
Backward
Microphone
USB
port
button
Play/Pause
button
Making phone calls
To: Do this:
Voice dial Press Talk once. (Some phones
might not support this feature.)
Redial Press Tal k twice.
Answer a call Press Talk once.
End a call Press Ta lk once.
Refuse a call While your phone is ringing,
press Play/Pause.
Change the volume Press + or – .
Transfer a call between Double-click Ta lk .
connected devices
Forward
button
Playing music
To: Do this:
Play/Pause Press || to launch the
phone’s MP3 player and
begin playing music.
Press || to pause and
resume playback. Press and
hold || stop playback.
Select a song Press and release or .
Rewind or While music is playing,
fast forward a song press and hold or .
(Some phones may not
support this feature.)
Answer a call while Press Ta lk , or press || to
playing music reject the call. Press Tal k
again to end the call. Music
resumes playing after a call
is rejected or ended.
Change the volume Press + or – .
Using EQ sound
There are three types of EQ sound effects:
• Normal (EQ off )
• Bass
• Normal
• Soft
The mode sequence is: Bass – Normal – Soft – Normal –
Bass – etc. A “beep” sound indicates each mode change.
To select a sound mode:
• While in play/pause mode, quickly press twice
|| (play/pause).
Resetting the headset
To reset your headset:
Press || (play/pause), and buttons at the same
time.
LED indicator messages
Headset Status LED Status
Power on Blue LED is on
Turning off Red LED dims and disappears
Low battery Red LED blinks continuously
Recharging Red LED stays on
Recharging complete Blue LED stays on
Pairing m ode Blue and red LEDs flash rapidly
Connection complete Blue LED blinks every
three seconds
Receiving a call Blue LED flashes rapidly
Talking on the phone Blue LED brightens and
dims repeatedly
Playing music Blue LED brightens and
dims repeatedly
Specifications
Bluetooth version: 2.1
Supported profiles: A2DP, AVRCP, HFP, HSP
Frequency spectrum: 2.4~2.4835 GHz
Working distance: Maximum 33 feet (10 m)
Operating temperature: 14~140° F (-10 ~ 60° C)
Operating time: Voice: 8 hours;
Music: 7 hours
Standby time: 150 hours
Size: 5.5 × 5.4 × 1.9 inches
(141 × 138 × 50 mm)
Weig ht: 1.2 oz (34 g)
Average charging time: 2 hours
Notes
For specifications, legal notices, warranty, and
instructions for multiple Bluetooth pairings, see your
online User Guide.
© 2009 Best Buy Enterprise Services, Inc. Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN USA 55423-3645
ENGLISH 09-0819
Loading...