Armband for
iPhone 5/5S and iPod
th
Touch 5
RF-A5AB2B
Generation
Package contents
• Armband
• Quick Setup Guide
Compatibility
• iPhone 5/5S and iPod Touch 5th
Generation
Using your armband
1 Insert your iPhone/iPod Touch into the
armband with the headphone jack
towards the bottom of the armband.
2 Insert the headphone jack into the
iPhone/iPod Touch, then use the cord
management feature.
QUICK SETUP GUIDE
Before using your new product, please read these
instructions to prevent any damage.
3 Slide the armband strap through the hole
on the armband:
• Large arm: use the outer belt loop.
• Medium arm: use the inside belt loop.
• Small arm: see the double loop
process in the next column.
Belt loop
4 Slide on the armband and secure the
strap.
Double Loop process:
1 Insert the strap through the rst belt
loop.
2 Loop the strap back through the second
belt loop and press together as shown to
secure.
One-year limited warranty
Visit www.rocketfishproducts.com for
details.
Contact Rocketfish:
For customer support, call 1-800-620-2790
(U.S. and Canada) or 01-800-926-3010
(Mexico)
www.rocketfishproducts.com
ROCKETFISH is a registered trademark of BBY Solutions, Inc. Registered in some
countries.
Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richeld, MN
55423 U.S.A.
©2013 BBY Solutions, Inc. All Rights Reserved.
V2 ENGLISH 13-0831