Rockectfish RF-TVMLPT03V3 User Manual
TV WALL MOUNT
RF-TVMLPT03V3
For wood-stud and concrete
wall installations
ASSEMBLY GUIDE
Before using your new product, please read these instructions to prevent any damage.
Safety information and specifications ......................2
Tools needed......................................................................3
Package contents .............................................................3
Installation instructions ................................................. 5
Safety information and specifications
Maximum TV weight: 130 lbs. (58.9 kg)
Screen size: 32" to 70" diagonal
Overall dimensions (H × W × D):
17.4 x 26.5 x 2 in. (44.2 x 67.3 x 5 cm)
Wall-mount weight: 6 lbs. (2.7 kg)
We’re here for you
www.rocketfishproducts.com
For customer service, call:
1-800-620-2790 (U.S. and Canada)
17.4" (44.2 cm)
26.5" (67.3 cm)
IMPORTANT
SAFETY
INSTRUCTIONS
- SAVE THESE
INSTRUCTIONS
CAUTION: Do not use this
product for any purpose not
explicitly specified by
Rocketfish.
Improper installation may
cause property damage or
personal injury. If you do
not understand these
directions, or have doubts
about the safety of the
installation, contact Customer Service or call a qualified contractor. Rocketfish is not
responsible for damage or injury caused by incorrect installation or use.
The weight of your TV must not exceed 130 lbs. (58.9 kg). The wall must be capable of
supporting five times the weight of your TV and wall mount combined.
This product contains small items that could be a choking hazard if swallowed. Keep
these items away from young children!
2
Need help? Call 1-800-620-2790 (U.S. and Canada)
TV WALL MOUNT RF-TVMLPT03V3
Edge-to-edge
stud finder
Pencil
Level
Phillips screwdriver
Socket wrench with
1/2" (13 mm) socket or
adjustable wrench
Measuring tape
Drill
Tap e
Hammer
7/32" (5.5 mm) wood drill bit
for wood stud wall
OR
3/8" (10 mm) masonry drill
bit for concrete wall
Top
Dessus
Parte superior
Top
Dessus
Parte superior
RF-TVMLPT03V2 Template • Gabarit • Plantilla
Note: For wood frame installations, use a stud nder to
locate wood studs rst.
Remarque : Pour une construction à ossature de bois,
localiser d'abord les montants en bois, à l'aide d'un
détecteur de montants.
Nota: para la instalación en construcciones de armazón
de madera, primero debe localizar las vigas de madera
con un localizador de vigas.
Need help deciding how high to mount your TV? Scan this QR code.
Besoin d'aide pour déterminer la hauteur de montage du téléviseur?
Numériser ce code QR.
¿Necesita ayuda para determinar la altura de montaje de su televisor?
Escanee este código QR.
V2 13-0197
Tools Needed
Outils nécessaires
Herramientas requeridas
C Right vertical
TV bracket (1)
B Left vertical TV
bracket (1)
A Wall plate (1)
D Tem plate (1 )
Tools needed
You will need the following tools to assemble your new TV wall mount:
Package contents
Make sure that you have all the hardware necessary to assemble your new TV wall
mount:
Need help? Call 1-800-620-2790 (U.S. and Canada)
3
TV Hardware Bag
Lbl Hardware Qty.
E4
F4
G4
H4
I4
J4
K4
L4
M4
M4 × 12 mm
screw
M4 × 35 mm
screw
M4 washer
M6/M8 washer
22 mm spacer
2.5 mm spacer
M6 × 12 mm
screw
M6 × 35 mm
screw
M8 × 16 mm
screw
Concrete Installation Kit CMK1 (not included)
Contact customer service at 1-800-359-5520 to have these additional parts shipped directly to you.
U4
Concrete anchors (Fischer UX10 x 60R)
M8 × 20 mm
screw
M8 × 25 mm screw
M8 × 35 mm screw
M8 × 45 mm screw
M8 × 50 mm screw
Lag bolt washer
5/16" × 2 3/4" lag bolt
Lbl Hardware Qty.
N4
O4
P4
Q4
R4
S4
T4
4
Need help? Call 1-800-620-2790 (U.S. and Canada)
TV WALL MOUNT RF-TVMLPT03V3
Installation instructions
STEP 1 - Determine whether your TV has a flat back or an
irregular or obstructed back
1 Carefully place your TV screen face-down on a cushioned, clean surface to
protect the screen from damages and scratches.
2 If your TV has a table-top stand attached, remove the stand. See the
documentation that came with your TV for instructions.
3 Temporarily lay the TV brackets (B and C) on the back of your TV in a vertical
orientation.
4 Align the screw holes in the TV brackets with the mounting screw holes on your
TV.
5 Identify which type of back your TV may have:
• Flat back: The brackets lay flush against the back of your TV and does
not block any jacks. You do not need spacers when assembling the wall
mount.
• Obstructed back: The brackets block any of the jacks on the back of
your TV. You will need spacers (I or J) when assembling the wall mount.
• Irregularly-shaped back: There is a gap between the brackets and
some part of the back of your TV. You will need spacers (I or J) when
assembling the wall mount.
6 Remove the TV brackets (B and C).
Need help? Call 1-800-620-2790 (U.S. and Canada)
5
STEP 2 - Select screws, washers, and spacers
Screw is
too long
Screw fits
correctly
Screw is
too short
1 Select the hardware for your TV (screws, washers, and spacers). A limited number of
TVs come with mounting hardware included. (If there are screws that came with the
TV, they are almost always in the holes on the back of the TV.) If you don't know the
correct length of the mounting screws your TV requires, test various sizes by hand
threading the screws.
Select one of the following types of screws:
M4 × 12 mm screws (E) M8 × 20 mm screws (N)
M4 × 35 mm screws (F) M8 × 25 mm screws (O)
M6 × 12 mm screws (K) M8 × 35 mm screws (P)
M6 × 35 mm screws (L) M8 × 45 mm screws (Q)
M8 × 16 mm screws (M) M8 × 50 mm screws (R)
Select M4 washers (G) or M6/M8 washers (H).
For an irregular or obstructed TV back, use the 22 mm spacers (I) or 2.5 mm
spacers (J).
CAUTION: To avoid potential personal injuries and property damage, make sure
that there are adequate threads to secure the brackets to your TV. If you encounter
resistance, stop immediately and contact customer service. Use the shortest screw
may damage your TV. However, using a screw that is too short may cause your TV to fall from
the mount.
and spacer combination to accommodate your TV. Using hardware that is too long
2 Remove the screws.
3 For a flat back TV, go to “STEP 3 - Option 1: Attaching the mounting hardware to
TVs with a flat back” on page 7.
-OR-
For an obstructed back, go to “STEP 3 - Option 2: Attaching the mounting
hardware to TVs with irregular or obstructed backs” on page 8.
6
Need help? Call 1-800-620-2790 (U.S. and Canada)
Loading...