Rockbox Matador User Manual

Save Your

Favorite

Settings

On Back

A/C Adapter

OUTPUT INPUT

GAIN

DRIVE

ACTIVE

BASS / TREBLE

FOOTSWITCH

9V Battery
(Internal)

Thank you for purchasing the Matador™ Preamp. The Matador™ is an inspiring tool for the working

musician. Capable of everything from a huge clean boost to a smooth overdrive sound, the Matador
can be dialed in for just the right sound for your rig. The Matador™ features an active boost and cut
tone section, allowing precise tone-shaping to achieve your sound. When you want the Matador out of
the mix, a silent, true-bypass switch allows your signal to be passed directly from input to output.

Note: Always be sure to lower the gain on the pedal AND your amp before connection.

Gain - Sets the overall volume. Use this to match volume or give a boosted output when the

pedal is selected.
Drive - Sets the amount of available distortion.
Treble, Bass - Provides ±15dB to shape your tone.

A/C Adapter - Uses standard 2.1 x 5.5mm Center Negative Polarity 9v adapter, such as a Boss.
Using an A/C Adapter bypasses the supplied internal 9V battery. Be sure to check the internal battery
regularly for leakage.

WARNING! SUPPLYING IMPROPER VOLTAGE OR POLARITY CAN DAMAGE THE UNIT! DAMAGE TO
UNIT DUE TO IMPROPER POWER SUPPLY IS NOT COVERED UNDER WARRANTY!

This product is warrantied against manufacturers defects in workmanship and materials to the original purchaser for a period of
two years from the date of purchase. Failure due to the following will void the warranty: Rockbox is not responsible for failure
due to modifications, abuse, incorrect power supply or repairs done by others. Warranty repairs are performed at Rockbox.
Purchaser is responsible for shipping charges to Rockbox. Rockbox will repair or replace at its discretion.

Rockbox Electronics • 760 Meridian Way • San Jose, CA 95126 • 408-279-9400 • www.Rockbox.com

TM

Saved Settings