1
Instruction manual
ATHENA BM
ATHENA PC
ATHENA BM HALO
ATHENA PC HALO
Summary
1. Instruction warnings .............................................................................................................................. 2
2. Safety and Right Use Warnings ............................................................................................................ 2
3. Warranty ............................................................................................................................................... 2
3.1 Unpacking....................................................................................................................................... 2
4. Appliance Start Up ................................................................................................................................ 4
4.2 Technical Features ........................................................................................................................ 4
4.3 Use Suggestions............................................................................................................................. 5
5. Cleaning and Maintenance ................................................................................................................... 5
6. Optionals .............................................................................................................................................. 6
7. Spare Parts ......................................................................................................................................... 6
8. Wiring diagrams.................................................................................................................................... 8
9. Troubleshooting .................................................................................................................................... 9
10. Disposal.............................................................................................................................................. 9
EN
2
1. Instruction warnings
User has to hold the whole instructions. User must store up this document in case of use. The
manufacturer is not responsible of any damage incurred due to the failure of improper use of this
manual.
All measures in this manual are in mm.
2. Safety and Right Use Warnings
The Rocam Losi products meet the latest technological evolutions and current safety
guidelines. Buffet line ATHENA, object of this booklet, is designed to be in compliance
with directives and field laws, in order to guarantee a safe and reliable product.
Any other use will be considered inappropriate to the original destination. The producer is
not responsible of any damage caused by an improper use. Responsibility lies only on
user. A proper use also includes compliance with the instructions for use and installation
and any additional documentation as well as the conditions of inspection and maintenance.
3. Warranty
We thank you for purchasing a Rocam Losi product, designed and produced for a professional
environment. Due to commercial and construction requirements, the manufacturer reserves the right to
make changes in order to enhance the quality and use of product. Rocam Losi s.r.l., in compliance with
European Community legislation, grants its products for 12 months. This warranty does not include
electrical parts, labour and all replacements related to an improper use of the good. Any manipulation
carried out automatically excludes the liability of the manufacturer. The products or parts to be replaced
or repaired for unequivocal defects in workmanship and materials used must be in a “free port” at the
offices of the producer, who after a careful inspection, will repair or replace them. The repairs are carried
out exclusively at the headquarters of the manufacturer, and none cost incurred by the customer for
repairs will be refunded by the manufacturer unless explicitly agreed.
ANY MANIPULATION AUTOMATICALLY EXCLUDES THE MANUFACTURER’S LIABILITY AND THE
WARRANTY ON THIS PRODUCT.
3.1 Unpacking
This item is packed and shipped assembled. The manufacturer declines every
responsibility for damages of someone or something caused by the failure to comply with
the instructions of this manual.
Do not make any structural change to the trolley.
The elements composing the trolley (plastic, polyurethane foam, bubble wrap, Styrofoam,
cardboard and so on) must be kept away from children as potential sources of danger and must be
collected and disposed off separately in accordance with local regulations.
The manufacturer declines every responsibility of damage of someone or something caused by the
failure to comply with the instructions of this manual.
After the unpacking of the item from its packing, proceed by removing the adhesive plastic tape before
starting up the product. Any residual glue has to be removed carefully (do not use abrasive cleaners).
The device is designed to run on AC to the voltage specified on the technical data plate (located on the
bottom of the tank).
The grounding line is marked by the colours yellow/green and must not be interrupted.
The device is provided with a cable in accordance with the CE regulations and with a schuko plug (that
can be replaced, when necessary, with a different plug, suitable for the specified wattage and in
accordance to the current regulations and guidelines; when necessary, replace the provided cable with a
new one with the same features).
3
4
Before switching on the appliance
• Check if the electrical system can withstand the appliance’s load (WATT as indicated on the
technical plate)
• Make sure that the electrical system is provided with ground connection according to the current
norms and guidelines.
• Connect the appliance with the ground network through a cable connected to the specific screw
placed on the external casing of the appliance.
4. Appliance Start Up
Once ready to start the appliance, plug the device in
the electrical system and press the red power switch
placed on the upper part of the unit.
As you turn on the appliance the thermostat display will
flash and then it will display “OFF”. To start the unit
press the on/off button on the electronic thermostat for
2 seconds, The starting temperature of the device will
be displayed on the thermostat. The black switch on the
right-hand side of the thermostat is the LED/HALO
LAMPS on/off switch that works independently from the
heating system.
Once started up, the appliance reaches the selected
temperature in about 1.5 hour (depending by the
starting temperature, the room temperature and the
exposure of the buffet trolley).
The thermostat is set from the manufacturer on +90°C
for a optimal use of the device. Use the attached
instructions to change the settings of the digital
thermostat.
CAUTION! Any change in the thermostat settings must be done on the temperature
only. Any other parameter changes can affect and damage the operation of the
compressor.
PLEASE REFER TO THE ATTACHED INSTRUCTIONS
4.2 Technical Features
ATHENA BM / PC
ATHENA BM HALO / PC HALO
3 GN
4 GN
5 GN
3 GN
4 GN
5 GN
Power supply
230 V
230 V
230 V
230 V
230 V
230 V
Max rated output
2262 W
3016 W
3770 W
2850 W
3400 W
3700 W
Temperature
Range
+30°/+90°C
+30°/+90°C
+30°/+90°C
+30°/+90°C
+30°/+90°C
+30°/+90°C
Range operating
temperature
+30°/+90°C
+30°/+90°C
+30°/+90°C
+30°/+90°C
+30°/+90°C
+30°/+90°C
Well/top capacity
3 x GN 1/1
4 x GN 1/1
5 x GN 1/1
3 x GN 1/1
4 x GN 1/1
5 x GN 1/1
Pans height (mm))
210
210
210
210
210
210
Weight (Kg)
123
145
175
147
170
194
5
4.3 Use Suggestions
ATHENA BM buffet trolley has been designed and created to work exclusively
through the “bain-marie” system, therefore It shall never be turned on without water
in the well.
Gastronorm pans (with food) can be placed inside the general well in all the possible splits combinations.
Pay close attention to the contact between the water in large quantity and the wooden parts to
avoid blisterings and scrapings of the same.
The final customer must regularly check the food temperature and, if necessary, has to change the
keeping temperature according to the requirements.
Before switching on, fill the well with a moderate amount of water and, in any
case, do NEVER exceed with water in the well (see max water level marked on
the well’s side).
5. Cleaning and Maintenance
WARNING:
Before any cleaning operation unplug the device from the electrical system. Never
wash the appliance with water jets in order to prevent water seepage inside the
electrical components.
Clean the appliance at the end of the service.
On Bain Marie (BM) models the well has to be emptied through the
drain cock (see image on the right). Place a bucket under the drain
cock and turn the lever, make sure it is closed once the tank will be
empty. Once the well will be empty, it is recommended to dry it up
with a cloth or a sponge. On Hot shelf models (PC) clean the
temperate glass top with a soft cloth and with glass-suitable products.
The laminate parts can be cleaned with a damp cloth- In case of
stubborn stains, use a damp cloth with some alcohol, do never use
corrosive or abrasive detergents.
Drain cock
“MAX” water level mark with GN pans
height 150mm
“MAX” water level mark with GN pans
height 200mm
6
6. Optionals
Please, do always mention the model of your reference.
7. Spare Parts
ATHENA BM/ PC
Ref.
Quantity
Description
Athena 3
BM / PC
Athena 4
BM / PC
Athena 5
BM / PC
Opt. 3
1-2*
1-2*
1-2*
Dish holder short side
Opt. 4
1-2*
1-2*
1-2*
Lower cabinet closure
Opt. 6
1- 2
1-2
1-2
Tip-up dish-holder long side
Opt. 7
1-2*
1-2*
1-2*
Tube structure long side dish holder
Opt. 9
1-2*
1-2*
1-2*
Long dish holder short side
7
ATHENA BM HALO / PC HALO
Ref
Code
Description
3 BM
3 PC
4 BM
4 PC
5 BM
5 PC
1
RS 3 3
4
Standard castor Ø75mm
2
RF 2 2
2
Castor Ø75mm with brake
3 1 1 1
Wood top shelf*
4 1 1 1
Plexiglass sneezeguard*
5 1 1 1
LED light*
6 1 1 1
LED transformer
7 1 1 1
General switch
8 1 1 1
Digital thermostat
9 1 1 1
Switch
10 3 4 4
Adhesive heating element
11 1 1 1
Drain cock
12 2 3 4
HALO lamp ASSEMBLY
8
8. Wiring diagrams
ATHENA BM / PC
ATHENA BM HALO / PC HALO
9
9. Troubleshooting
10. Disposal
The device must be disposed according to the local regulations and, where possible, it is
necessary to unmount it and differentiate the various components.. The packing elements
(plastic, foam, bubble wrap, styrofoam, cardboard, etc..) must be kept away from children
as potential danger and have to be collected and disposed separately according to the local
regulations.
This marking shown on the product or its literature, indicates that it should not be disposed with other
household wastes at the end of its working life.To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.Household users should contact
either the retailer where they purchased this product, or their local government office, for details of where
and how they can take this item for environmentally safe recycling.Business users should contact their
supplier and check the terms and conditions of the purchase contract. This product should not be mixed
with other commercial wastes for disposal.
Ref.
Description
E-TH
Digital Thermostat
IG
General switch
RES.
Heating elements
LED
LED lamp
I-LED
LED switch
PB1
Well probe
HALO
HALO lamps
I-HALO
HALO lamps switch
Problem
Possible Reasons
Solutions
The trolley does not heat
Power failure
Check the presence of electricity in the
socket
The thermostat has been tampered with or it is
broken
Check the thermostat regulation or
contact the retailer
The power cable is worned out
Replace the cable with a suitable one
One or more heating elements are burned
Contact the retailer
The LED lamp does not light up
The LED is burned
Contact the retailer
The transformer is burned
Replace with a transformer with same
characteristic or contact the retailer
HALO lamps don’t work
1 or more lamps are broken
Replace with new lamps with same
characteristic (300 W)
Loading...