
VEGAS 24V, IP20, CONSTANT VOLTAGE DRIVER,
NON DIMMABLE
RVA1524-PSU RVA3024-PSU RVA6024-PSU
RVA10024-PSU RVA15024-PSU RVA25024-PSU
RVA32024-PSU
PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN
FOR FUTURE REFERENCES.
! Electrical products can cause death or injury, or damage to property. If in any
doubt about the installation or use of this product, consult a competent electrician
Note:
Product technical information and specification may change over time without prior
notification. For the latest technical information please visit our web site
www.robus.com.au
-20°C < Ta < +40°C, 220-240V ~ 50/60Hz, Class II, IP20
Luminaire is non-dimmable
Suitable for mounting on a normally flammable surface.
Output power
RVA1524-PSU 15W Max.
RVA3024-PSU
RVA6024-PSU
RVA10024-PSU
RVA15024-PSU
30W Max.
60W Max.
100W Max.
150W Max.
Output
Current
0.625A Max. ≥ 0.5 ≥ 84% 3 Years
1.25A Max.
2.5A Max.
4.17A Max.
6.25A Max.
250W Max. 3 Years≥ 93%24V DC ≥ 0.9510.4A Max.RVA25024-PSU
320W Max. 3 Years≥ 90%24V DC ≥ 0.913.3A Max.RVA32024-PSU
Installation
1 Ensure mains supply is switched off before commencing work.
2 Consider total power of LED strip and choose
3 Connect driver primary cables live (ACL Brown), neutral (ACN Blue) to power supply.
4 Connect secondary cable Red V+ and Black V- to positive and negative on
LED strip or Vegas LED controller and amplifier.
Note: Increase the lenght of LED strips, consider to choose the larger watts of the drivers in
order to meet the connection in series and parallel with Vegas LED controller and amplifier.
In order to avoid the over heat, ensure the distance is 50mm allowance between the drivers
in the same installation location.
Output
Voltage
PF Efficiency Warranty
24V DC
24V DC
24V DC
24V DC
24V DC
≥ 0.9
≥ 0.9
≥ 0.9
≥ 0.9
≥ 85%
≥ 85%
≥ 90%
≥ 90%
the appropriate driver code.
3 Years
3 Years
3 Years
3 Years
D
W
1 2
L
RVA1524-PSU
RVA3024-PSU
RVA6024-PSU
RVA10024-PSU
RVA15024-PSU
RVA25024-PSU 195mm 67mm 31mm
RVA32024-PSU 215mm 78mm 35mm
L
103mm 35mm 16mm
149mm 40mm 27mm
170mm 45mm 28mm
180mm 63mm 31mm
180mm 63mm 31mm
W D
N
L
3
CTRL & AMP
PSU
DC+
DC-
V +
_
V
_
V
_
V
CRTL
50mm
Please allow 50mm spacing between drivers
CRTL
DC+
DC-
4
PSU
V +
_
V
_
V
_
V
The Installation must be carried out by a qualified electrician
LED Group Australasia
9/210 Queensport Road North Tel: 07 3890 5444
Murarrie Fax: 07 3890 4777
QLD 4172 Email: purchases@robus.com
Australia Website: www.robus.com.au
LED Group
Crowe Hogwarth Tel: +64 0508 533 335
72 Trafalgar Square Email: nz_purchases@robus.com
NELSON 7010 Website: www.robusled.co.nz
New Zealand
Issue 1 131019
AMP
DC+
DCV+
W/CH1
C/CH2
W/CH1
C/CH2
V+
5
Page 2