Robus R6060SMKB-01, R6060SMKBE-01 Installation Instructions

INSTRUCTION MANUAL

BOX SURFACE MOUNT KIT FOR 60X60 PANEL

- 50/80MM DEEP, WHITE

R6060SMKB-01, R6060SMKBE-01

PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES. ! Electrical products can cause death
or injury, or damage to property. If in any doubt about the installation or use of this product, consult a competent electrician. Note: Product technical
information and specification may change over time without prior notification. For the latest technical information please visit our web site
www.ledgrouprobus.com or www.ledgrouprobus.com.au

Installation diagram

1. Ensure mains supply is switched off before commencing work.

2. Mark fixing positions for the base plate on ceiling/wall based on the location holes on carboard,
check location buried cables, pipes or other building services before drilling

3. Insert the 4pcs screws into the holes on the sides of base plate, do not screw all the way in so that half the screws is protruding out.
Ensure screw positions correspond with slots

4. Attach base plate to surface using screws provided

5. Place the 600 x 600 panel into the front plate. Ensure that the fitting is fully down, secure the fitting in the plate by pressing the four clips

6. Attach the front plate to the base plate and slide into final position. Insert 4 locking screw into the plates.
Ensure that all screws are in tight and that the plates are secure

600mm

600mm

.

460mm

D

R6060SMKB

R6060SMKBE

Depth

50mm

80mm

Weight

1.2Kg

1.5Kg

300mm

1 2

3 4

LED Group

Western Retail Park
Nangor Road
Dublin 12
Ireland

Tel: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.ledgrouprobus.ie

Issue 2 240615

ISO 9001:2008

QUAL IT Y ASSU RE D CO MPANY

5 6

LED Group ROBUS Australia
9/210 Queensport Road North Tel: [phone]
Murarrie Fax: [phone]
QLD 4172 Email: [e-mail]
Australia Website: www.ledgrouprobus.com.au