Robus R2WLEDNME-01 Installation Instructions

2W LED NON MAINTAINED
RECESSED EMERGENCY LIGHT

R2WLEDNME-01

Please read instruction before commencing installation and
retain for future reference.

Specication:

Dimensions:

Model No. R2WLEDNME-01
Supply Voltage: 220-240V~50/60Hz
Power Consumption : 2W
Lumen Output : 190lm
Colour Temperature:
CRI: 75
Beam angle : 120o
Operating temp Range :
Battery 3.6V/3.0Ah Ni-Cd
Discharge Duration >3 hours after minimum 24Hr charge
Safety Classification:
IP Rating: 20
Overall Diameter: 130mm
Depth: 65mm
Weight: 0.7Kg
Warranty: 2 year
Installation:
Suitable for mounting on a normally flammable surface
Complies with EN60598-1;EN60598-2-22;EN55015;EN61000-3-2;
EN61000-3-3;EN61547

6000-7000K

0°C ~ +40°C

Class I, Must be earthed

Recessed

65mm

Battery 3.6V3.0Ah

2W Energency LED

Ø130mm

Cutout 75-110mm

Information for the Product user

1. Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste
(WEEE marked with crossed out wheelie bin symbol).

2. Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection
centre for waste electrical equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a
replacement.

3. This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly.
It is important that it is separated from normal household waste and recycled in the WEEE chain

4. The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household
waste, but should be disposed of according to local WEEE regulations

Ø85mm

Cutout 75mm

The Installation must be carried out by an electrician

LED Group

Western Retail Park Tel: [phone]
Nangor Road Fax: [phone]
Dublin 12 Email: [e-mail]
Ireland Website: www.led.ie

Issue 1 130913

ISO 9001:2008

QUAL IT Y ASSU RE D CO MPANY

Page 1

Testing:

The emergency lighting must be inspected and tested regularly in accordance
with local codes of practice: note: for safety reasons tests should be carried
out during daylight hours.

The minimum recommended test schedule is as follows:

After installation, allow 24 hours to ensure full battery charge and then
interrupt the supply; check after 3 hours that LED is still lighting.

1. Daily check that charge indicator led is working

2. Monthly, interrupt mains for a short period and check LED lights

3. Six-monthly, check 1 hour duration

4.At the end of year 3 and subsequently every year, check 3 hour duration:
batteries must be replaced when they can no longer support 3 hour operation.

5. Complete record sheet on installation and retain in maintenance file.

6. Update file with ongoing test records for inspection by fire officer or

Installation and Maintenance Record:

Installer

Installation Type

Installation test duration & Date

Month

1

2

3

4

5

6

7

8

Test

Short

Short

Short

Short

Short

1Hr.

Short

Short

Signed

1st Year

Date

Signed

2st Year

Date

Signed

3st Year

Date

Signed

4st Year

Date

Signed

5st Year

Date

9

10

11

12

Short

Short

Short

1Hr.

3Hr.

xx xxx xx xxx x xxxx xx xxx

The Installation must be carried out by an electrician

LED Group

Western Retail Park Tel: [phone]
Nangor Road Fax: [phone]
Dublin 12 Email: [e-mail]
Ireland Website: www.led.ie

xx xxx xx xxx x xxxx xx xxx

xx xxx x xxx x

ISO 9001:2008

QUAL IT Y ASSU RE D CO MPANY

Page 2