Robus R162D+L, R282D+L Installation Instructions

Specification:

2D GOLF surface fittings

R162D+L, R282D+L

Please read instructions before commencing installation and
retain for future reference.

incl.

IP65 2D fitting with ABS trim and PC lens for surface mounting. 16W and 28W
types with polycarbonate base

Protection against electric shock: Class 1: must be earthed
R162D+L R282D+L
Lamp type: 16W 4 pin 2D 28W 4 pin 2D
Diameter: 272mm 330mm

Depth: 90mm 118mm

Supply: 230/240V 50Hz

0.2A 0.32A
Temperature range: -20°C< ta < +40°C

Installation:

Suitable for mounting on normally flammable surface

Minimum distance from illuminated object is 0.5 metre

Ingress protection: IP65 dust and splash proof

Complies with EN60598 -1(BS4533),EN61347-2-3,EN55015,
EN61000-3-2,EN61000-3-3.

!Electrical products can cause death or injury, or damage to property. If in any
doubt about the installation or use of this product, consult a competent electrician.

1 Ensure mains supply is switched off
2 Ensure there is at least 100mm of free space around the luminaire location
3 Check location of buried wires before drilling fixing holes
4 Connect supply cables Live, Neutral and Earth to fitting terminals
5 Refit reflector plate. Note: If plate is not correctly aligned with screws fully home,
the lamp might not engage lampholder satisfactorily
6 Lamp installation and replacement:

!Ensure mains supply is off. !When operating the lamp is too hot to touch. Switch
off and allow to cool before undertaking any maintenance work.

Information for the Product user

1. Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste (WEEE
marked with crossed out wheelie bin symbol).

2. Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection centre
for waste electrical equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a replacement.

3. This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly. It is
important that it is separated from normal household waste and recycled in the WEEE chain

4. The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household
waste, but should be disposed of according to local WEEE regulations

The Installation must be carried out by an electrician

LED Group
Western Retail Park Tel: [phone]
Nangor Road Fax: [phone]
Dublin 12 Email: [e-mail]
Ireland Website: www.led.ie

Issue 1 150110

ISO 9001:2008

QUAL IT Y ASSU RED C OMPA NY

Page 1

Installation diagram:

+L

+L

Figure 1

Figure 3

Figure 2

Figure 4

+L

+L

Figure 5

The Installation must be carried out by an electrician

LED Group
Western Retail Park Tel: [phone]
Nangor Road Fax: [phone]
Dublin 12 Email: [e-mail]
Ireland Website: www.led.ie

Figure 6

ISO 9001:2008

QUAL IT Y ASSU RED C OMPA NY

Page 2