Robus R100LEDWW-01 Installation Instructions

INSTRUCTION MANUAL

GOLF 10W LED WITH
PRO-DIFFUSER, 3000K

R100LEDWW-01

PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES.
! Electrical products can cause death or injury, or damage to property. If in any doubt about the installation or
use of this product, consult a competent electrician
Note:
Product technical information and specification may change over time without prior notification
For the latest technical information please visit our web site www.ledgrouprobus.com or robusdirect.com

Specifications Installation

Model No: R100LEDWW-01
Voltage: 220-240V ~ 50/60Hz
Power: 10W
Lumen: 700lm
CCT: 3000K
CRI: 80
Power Factor: 0.75
Operating Temp Range: -10°C ~ 30°C
IP Rating: 65
IK: 09
Safety Classification: Class I
Diameter: Ø330mm
Depth: 118mm
Weight: 1.4kg
Warranty: 5 Years
Suitable for mounting on a normally flammable
surface
This fitting is not suitable for installation where
ambient air temperature is above 30°C
Complies with EN60598-1,
EN60598-2-1,EN61347-1,EN61347-2-13, EN 62031,

1. Ensure mains supply is switched off before commencing
work

2. Ensure there is at least 100mm of free space around the
luminaire location

3. Remove trim/ diffuser and LED plate from base of the
fitting

4. Drill cable entry and mounting holes in the base

5. Mark appropriate fixing hole positions on wall, check
location buried cables, pipes and other building services
before drilling.

6. Feed supply cables to cable entry hole and attach base to
surface

7. Connect supply cables Live, Neutral and Earth to fitting
terminals

8. Refit LED plate and trim/ diffuser to base

Information for the Product user:

1. Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste (WEEE marked with
crossed out wheelie bin symbol).

2. Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection centre for waste electrical
equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a replacement.

3. This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly. It is important that it is
separated from normal household waste and recycled in the WEEE chain

4. The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household waste, but should be
disposed of according to local WEEE regulations

The Installation must be carried out by an electrician

LED Group

Western Retail Park Tel: [phone]
Nangor Road Fax: [phone]
Dublin 12 Email: [e-mail]
Ireland Website: www.led.ie

Issue 1 030314

ISO 9001:2008

QUAL IT Y ASSU RE D CO MPANY

1

Installation diagram

Ø330 mm

118 mm

1

3

2

4

N L

The Installation must be carried out by an electrician

LED Group

Western Retail Park Tel: [phone]
Nangor Road Fax: [phone]
Dublin 12 Email: [e-mail]
Ireland Website: www.led.ie

Diffuser

5

6

ISO 9001:2008

QUAL IT Y ASSU RE D CO MPANY

1