ROBOTIS BT 410 User Manual
User Guide
[BT-410]
Purpose
The BT-410 is an UART serial Dongle implementing Bluetooth Low Energy standards. The Dongle can be attached
to following devices.
(Please refer to each controller on how to mount the BT-410.)
•
BT-410 : CM-100, CM-200, CM-510, CM-530, CM-700, OpenCM9.04
[ examples of use]
•
DREAM Bug control via Bluetooth communications
o
Mount the BT-410 to the Bug’s controller (CM-150)
o
Connect a smartphone to the BT-410 and control the Bug
Set-up
•
Install RoboPlus (RoboPlusWeb(v1.1.3.0).exe).
•
Connect BT-410 to LN-101.
•
Connect LN-101 to PC via USB port.
•
Wait during driver installation and COM port assign.
•
Open Device Manager (My Computer Properties Device Manager)
•
Check COM port number of LN-101.
•
Run Tera Term.
BT-410
--USB --> PC
LN-101
Loading...