Robot Coupe Blixer 2, Blixer 4 Series A, Blixer 4 V. series A, Blixer 3 Series D User Manual

\

bot

Robot-coupe USA. Inc.

P.o. Box 16625, Jackson, MS 39236·6625

264 South Perkins St., Ridgeland, MS 39157

e-mail: [e-mail] - website: www.rabotcoupeusa.com

Phone: [phone]

• Blixer® 2

• Blixer® 3 Series D

• Blixer® 4 Series A

• Blixer® 4 V. Series A

ARY

u

WARRANTY

MAINTENANCE

• Blade

IMPORTANT WARNING

• Motor seal

INTRODUCTION TO YOUR NEW

• Bowl locking washer

EMULSIFIER-MIXER Blixer@ 2 •

• Wiper assembly

Blixer@ 3 • Blixer@ 4 • Blixer@ 4 V.

••

TECHNICAL SPECIFICATIONS

SWITCHING ON THE MACHINE

• Weight

• Advice on electrical connections

• Dimensions

• Control panel

• Working height

• Noise level

-

ASSEMBLY

••

SAFETY

-

OPERATION

SERVICE

-

CLEANING

• Motor unit

TECHNICAL DATA

(Page 25)

• Blade

• Parts diagram

• Wiper assembly

• Electrical diagram

UNPACKING

• Carefully remove the equipment from the packaging
and take out all the boxes or packets containing
attachments or specific items.

• WARNING: some of the parts are very sharp e.
g. blades ... etc.

INSTALLATION

• We recommend that you install your machine on
a stable solid base at a comfortable working height.

• Machine must be operated and stored in a location
not subject to water drips or spray or explosive
vapors.

CONNECTION

• Always check that your power supply corresponds
to that indicated on the serial number plate and that

it is properly sized.

• Always connect the machine to a grounded outlet
with GFCI (ground fault circuit interrupt) protection.

HANDLING

• Always wear cut-resistant gloves when handling

the cutter blade.

IMPORTANT WARNING

ASSEMBLYPROCEDURES

• Follow the various assembly procedures carefully
(see page 6) and make sure that all the attachments
are correctly positioned.

• The machine must not be modified in any way
from its original configuration.

• Operating times of 5 minutes or longer can
cause processed food to increase to temperatures
above

125

0

F

(52

0

C).

• Never tamper with, or defeat the purpose of

the locking and safety systems.

• Do not put nonfood objects in the bowl

• Do not leave the machine running unaHended.

CLEANING

• Always unplug your machine before cleaning.

• Always clean the machine and aHachments at
the end of each use.

• Never place the motor unit in water.

• For parts made of aluminum alloys, use

cleaning detergents suitoble for aluminum.

USE

• For plastic parts, do not use detergents that are
too alkaline (i.e., contoining too much caustic soda
or ammonia ... ).

Robot Coupe can in no way be held responsible
for the user's failure to follow the basic rules of
cleaning and maintenance.

MAINTENANCE

• Always unplug the appliance before servicing.

• Check the seals regularly and ensure that the

safety devices are in good working order.

• It is particularly important to maintain and
check the attachments since certain products
contain corrosive agents e.g. citric acid.

• NOTICE: Never operate the appliance if the

power cord or plug has been damaged.

• If the machine fails to operate as described in

this manual, or if the machine malfunctions in any

way, remove the machine from use and have it

serviced. Additionally, discard all food processed
at the time of the malfunction.

• Contact your local Authorized Service Agency if

something appears to be wrong.

7 -

The cost of changing direction-of-rotation of
three-phose electric motors (Installer is
responsible).

ROBOT COUPE U.S.A., INC. LIMITEDWARRANTY

YOUR NEW ROBOT COUPE
PRODUCT IS WARRANTED TO THE
ORIGINAL PURCHASER FOR A

PERIOD OF ONE YEAR FROM THE
DATEOF PURCHASE.

This LIMITEDWARRANTY is against
defects in the material and/or
workmanship, and includeslabor for

replacement of defective parts,
provided repairs are performed by
an authorized service agency (see
attached listl.

The Customer must inform the
Service Agency of the possibility of
warranty coverage and provide a
copy of the dated sales or delivery

receiptBEFOREWARRANTY REPAIRS

ARE BEGUN.

Replacement parts and accessories
are warranted For ninety (901 days
from the date of purchase when
purchased separately and will be
verified by dated sales receipt OR
packing slipwhich liststhat item.

All parts or accessories replaced
under warranty must be returned to
the Service Agency.

THE FOLLOWING ARE NOT
COVERED BY THE ROBOT COUPE

U.S.A. INC. LIMITEDWARRANTY:

1 -

Damage caused by abuse, misuse, drop-

ping, or other similar damage caused by

or resulting from failure to follow assembly, ope-

rating, cleaning, user maintenance or storage
instructions.

2 - Labor to sharpen and/or replacements for

blades that have become blunt, chipped or worn
after a normal or excessive period of use.

3 -

Materials or labor to replace or repair scrat-

ched, stained, chipped, pitted, dented or discolo-

red surfaces, blades, knives, attachments or ac-

cessories.

4 -

Any alteration, addition, or repair that has
not been carried out by the company or on ap-
proved service agency.

5 - Transportation of the appliance to or from

on approved service agency.

6 -

Labor charges to install or test new
attachments or accessories (i.e., bowls, plates,
blades, attachments), which have been replaced
for any reason.

8 -

SHIPPING DAMAGES. Visible and/or
hidden damage is the responsibility of the freight
carrier. The consignee must inform the carrier
and consignor immediately, or upon discovery in
the case of hidden defects.

KEEP ALL ORIGINAL CONTAINERS AND PAC-
KING MATERIALSFOR CARRIER INSPECTION.

Neither ROBOT COUPE U.S.A., INC. nor its
affiliated companies or any of its distributors, di-
rectors, agents, employees, or insurers will be
liable for indirect damage, losses, or expenses
linked to the appliance or the inability to use it.

The ROBOT COUPE U.S.A., INC. warranty

is given expressly and in lieu of all other
warranties, expressed or implied, for merchan-
tability and for fitness toward a particular

purpose and constitutes the only warranty

made by ROBOTCOUPEU.S.A., INC.

4