User manual
Q-Scout is an ideal entry-level programmable robot for kids above 6 to
STEM education. It is an open source based smart robot which has high
extensibility and compatibility. With our Scratch 3.0-based Apps, Kids can
control it, play it and code it. Q-Scout gives students a chance to apply
what they know, identify problems, find unique solutions and lead their
own learning.
Using your smart devices to program Q-Scout to move, light up, make
sounds, avoid obstacles, and even perform based on your special
program. Kids are immersed in cool robots to learn STEAM knowledge,
which empowers kids and students hands-on ability and coding skills to
bring their innovative ideas into reality.
How to Build
How to use App
1. Download app. Search robobloq on APP store or Google Play. Then
download.
2. Follow instruction in the app, choose one forms you like to build the
robot.
3. Turn on the robot and connect the bluetooth.
4. Try different play mode on the app including controlling mode,
distance avoid, music mode.
5. Try graphical programming in my application. You can build your own
actions by graphical programming.
Compliance Information
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment
The shielded USB Type-B Plug cable must be used with this unit to ensure compliance
with the Class B FCC limits.
EU Compliance Statement
Radio Frequency Information
Frequency Range:
2400 MHz to 2483.5 MHz
Bluetooth Version:
Bluetooth V4.0 LE
Type of Modulation:
GFSK
Number of Channels:
40
Channel Separation:
2 MHz
Antenna Type:
PCB Antenna
Antenna Gain:
0 dBi
Maximum EIRP:
0 dBm
1. Simplified EU Declaration of Conformity
The simplified EU declaration of conformity referred to in Article 10(9) shall be provided as
follows: Hereby, RoboBloq Co., Ltd. declares that the radio equipment type RB-00002 is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address: http://www.robobloq.com/app/cert
2. Version Information
Software Version: V1.0
Hardware Version: V1.0
3. Radio Frequency Information
Manufacturer: RoboBloq Co.,Ltd.
Address: Room 202, 2nd Floor, Building A17, Jiyue City, Nanshan District,
Shenzhen, Guangdong Province, China, 518000
Tel: (86)075526926929
Loading...