R01502 - TL-3C 3-Channel 2.4GHz RC-System
USER MANUAL
2,4G
FHSS Technology
DIGITAL PROPORTIONAL RADIO CONTROL SYSTEM
2
Thank you for purchasing our R/C-System!
Before using, read this manual carefully!
Warranty
With the purchase of this product you purchased at the same time a two-year
warranty from date of purchase. The guarantee applies only to the already existing
material on the purchase of the product and / or functional defects.
Excluded from the guarantee:
• Damage caused by incorrect use
• Damage caused by neglect of duty of care
• Damage caused by improper handling and maintenance errors
• Liquid damage
For warranty claims, please contact your local dealer.
Should it be necessary to send the product, you must enclose a copy of the invoice
and a repair order. You can download it at www.robitronic.com. With direct sending to
the service department must be consulted beforehand (held by telephone or e-mail).
The postage costs borne by the consignor. Paid packages are not accepted.
Everyone sent in warranty case is first examined by our service department on
admissibility. For reject warranty claims will be charged back to a control and
processing fee before we return the product. Repairs not covered under warranty,
before the start of the repair must be paid.
Robitronic assumes no liability for damages and losses directly or indirectly, by the
sequence of use or misuse of this product and its required accessories products
needed for their operation, arise.
Disclaimer
As compliance with the instructions, the operations and conditions when using the
device at no time can be monitored by the manufacturer; the manufacturer assumes
no liability for damages, costs and / or losses arising from incorrect use and / or
incorrect operation or in any way connected.
Intended Use
The remote control is designed exclusively for private use in model construction. The
remote control is not for industrial use, e.g. to control machines and equipment,
determined.
Any use other than as described above, can lead to damage of the product, and
beyond this, with the associated risks, such as short circuit, fire, electric shock, etc..
Contact with water must be avoided!
The remote control must not technically be changed or rebuilt!
The safety precautions are essential to follow!
You as a user are solely responsible for the safe operation of your remote
control and your model!
3
Table of content
Caution.......................................................................................................................... 4
1.1 Transmitter Chart .................................................................................................... 5
Edit Buttons ........................................................................................................... 5
1.2 „Binding“ the receiver ............................................................................................. 6
2.1 Characteristics of system ....................................................................................... 7
2.2 Menu-introduction ................................................................................................... 8
2.3 Main-Menu overview ............................................................................................ 10
2.4 EPA ....................................................................................................................... 10
2.5 D/R ........................................................................................................................ 11
2.6 S_TRIM ................................................................................................................. 11
2.7 REV ...................................................................................................................... 12
2.8 ST_CURV ............................................................................................................. 12
2.9 TH_CURV ............................................................................................................. 12
Adjustment method for EXP curve ...................................................................... 13
Adjustment method for CUR curve ..................................................................... 14
Adjustment method for VRT curve ...................................................................... 14
2.10 ABS ..................................................................................................................... 15
2.11 MODEL ............................................................................................................... 16
2.12 SPEED ................................................................................................................ 17
Steering Speed .................................................................................................... 17
Throttle Speed ..................................................................................................... 18
2.13 ATS ..................................................................................................................... 18
2.14 BR_MIX .............................................................................................................. 19
2.15 MIX ..................................................................................................................... 20
2.16 TH_HOLD ........................................................................................................... 21
2.17 F/S ...................................................................................................................... 21
2.18 NEUTRAL ........................................................................................................... 22
2.19 SOUND ............................................................................................................... 22
2.20 RESET ................................................................................................................ 23
2.21 MODEL RESET .................................................................................................. 23
2.22 TIMER ................................................................................................................. 23
3.1 TRIM_ADJ ............................................................................................................ 24
3.2 Handling procedure for batteries .......................................................................... 25
3.3 Wiring of the receiver ............................................................................................ 26
3.4 Technical data ...................................................................................................... 26
Transmitter: ......................................................................................................... 26
Receiver: ............................................................................................................. 26
4. Declaration of Conformity (DOC) ........................................................................... 27
4
Caution
To work your R/C with your models correctly and safely, read this manual carefully
and keep it in a safe way as a reference introduction in the future.
• This product is only equipped for radio controlled models.
• The usage of this product should be approved by local relevant law or
regulations.
• We will not be responsible for the damages caused by unauthorized
modification, adjustment or replacement of parts of this product.
• The manual may be altered without prior notice. Please contact us if you have
any corrections or clarifications that should be made in the manual.
• Please pay more attention to the parts in this manual, which are marked with
„Warning“.
• Because of disturbance, do not work your radio control system simultaneously
with others at the same frequency.
• Before starting the transmitter, make sure the transmitter batteries are well
loaded. The voltage of transmitter batteries is never lower than 8,6 V, And
please check and confirm that the servos are all well and properl y connected.
• Please check and have a test on control surfaces to confirm the transmitter
handling of each part prior to each take off. The frequencies of the module and
the receiver should be the same.
• Keep the radio system away from moist, high temperature and strong shake.
Do not clean the product with solvent.
• The antenna does not touch anything else when power switch is turned on. Do
not leave this product and ist accessories within the reach of small children.
• Please use this product according to our local relevant law or regulation, we
are not responsible for any incidents or damages.
5
1.1 Transmitter Chart
Antenna 3. Channel
Steering trim
LC-Display Steering wheel
Power switch
Throttle trim
Charging jack
Edit Buttons Throttle trigger
Throttle hold
Dual Rate
Battery box
Edit Buttons
6
1.2 „Binding“ the receiver
With the binding process the receiver is coupled to the transmitter.
Turn on the transmitter, then connect the power of receiver keeping the receiver
„BIND“ button till the light turn on GREEN which means the binding is successful.
After that, it’s unnecessary to bind again.
• Caution: making sure that the RX and TX within one meter, and around 10
meters no similar device.
• If the LED is flashing, showing the binding failure, please do again as above
indication.
7
2.1 Characteristics of system
• 3 channels End Point Adjustment.
• Support dual rate function for the STEERING.
• Sub-trim for THROTTLE channel and STEERING channel.
• Model names can use up to 5 letters and numbers, so that easily understood
names can be set. A model memory with different fine setups can be created
by using the model copy function. Sixteen models can be added.
• Brake mixing for large cars (BRAKE)
o Brake mixing of the front and rear wheels of 1/5GP and other large cars
can be adjusted independently.
o Anti-skid braking system (A.B.S) This function applies the brakes so
that the tires of gasoline engine cars, etc. do not lose their grip on the
road even when braking at corners.
• SPEED
o TH-SPEED: Sudden trigger operation on a slippery road surface will
only cause the tires to spin and the model to not accelerate smoothly.
By setting the throttle speed function, operation can be performed
smoothly and easily. It also suppresses battery consumption.
o ST-SPEED: When you sense that the steering servo is too fast, etc.,
the servo operating speed (direction that suppresses the maximum
speed) can be adjusted.
• Auto-Start funktion (ATS)
o A pre-set throttle position, less than full throttle, to be used for the initial
acceleration off the line without having wheel spin. When the trigger is
released, auto-start is turned off and throttle operates normally again.
• TIMER: The TC-3 has two timers: Down_Timer and UP_Timer.
• Digital trim function: The current trim position is displayed on the LCD screen.
8
2.2 Menu-introduction
9
Loading...