Robic SC-594 User Manual

OPERATING INSTRUCTION FOR SC-594
(A) FEATURES

The SC-594 is a multi-function watch designed to have Chronograph, Count Down Timer, Alarm and Pulse Rate
Monitor. The main features are listed as follow:

S1

S4

S2

- 6 modes of operation: Normal Time, Pulse Rate Monitor, Chronograph, Timer, Alarm and Safety Range Set.

- Normal Time presents Hour, Minute, Second, Weekday, Month and Date.

- 12/24 Hr display format.

- Pulse Rate monitor with “Safety Range” and “Warning Sound”.

- 1/100-second Chronograph with split function up to 100 hours.

- Daily alarm which can be set to sound for 20 seconds.

- Hourly chime signal at the top of each hour.

- 1-second resolution Count down Timer with working range from 1 minute to 19 hours 59 minutes. User option
for Count Down Stop, Count Down Repeat and Count Down/ Up function.

- 3 seconds light up EL back light.

(B) EL BACK LIGHT

Press button S1 for EL back light with 3 seconds auto light up.

(C) BASIC OPERATION OF BUTTONS

S1: - EL BACK LIGHT

- START/STOP OF CHRONOGRAPH

- TIMER START/STOP

- ADVANCE SETTING DIGITS (SET)
S2: - SET (PRESS & HOLD)

- ENTER/EXIT PULSE RATE MONITOR MODE

- EXIT SET (SET)
S3: - MODE CHANGE

- SELECT SETTING DIGITS (SET)
S4: - SPLIT/RESET OF CHRONOGRAPH

- RELOAD PRESET TIMER TIME (TIMER STOPPED)

- SELECT TIMER FUNCTION (TIMER RELOADED/RESET)

- ALARM AND CHIME ARM/DISARM

- TOGGLE “AGE” & “SAFETY RANGE” DISPLAY
A word about the SC-594 and Pulse estimation

S4

S3

S1

S2

1

The SC-594 is a simple detector meant to offer general guidance as to the Pulse Rate of a person at a given
moment in time. This is not a medical device and it should not be viewed as offering any sort of physical
indication, prescription, or protection. Each person makes their own decisions about their health and the
information they deem of value should be obtained from a licensed Medical Professional. Above all else, refer to
your Doctor or Health Care professional for guidance as to the exposure to exercise or day to day events which
are safe for you and your family.

The Pulse Rate is an indication of the number of times a heart beats during a period of time. We will estimate the
approximate number of times it will beat in a minute. Both internal and external factors can affect this rate,
including but not limited to Stress, Smoking, Exercise, Eating, rate of breathing, and Air Temperature. The SC-594
will have difficulty obtaining a Pulse Rate for those people having an irregular heart beat or cardiovascular deficits.

These calculations are for general reference and should not be considered as a diagnosis or any sort of medical
indication.

(D) MODE CHANGE OPERATION

Press button S3 for mode change operation. The sequence is shown as follow:

(E) HOW TO SET NORMAL TIME

- Press button S3 to show Normal Time mode, weekday displayed in the bracket.

- Press & hold button S2 for 3-4 seconds to enter setting mode. The second digits start flashing.

- With each press of button S1, the selected digits, weekday or 12H/24H to be adjusted (flashing) can be made.
Press & hold button S1 for fast setting.

- With each press of button S3, next digits, weekday or 12H/24H for setting can be selected. The sequence is
shown as follow:

S3 PULSE RATE MONITOR

S4

S3

NORMAL TIME

S3

CHRONOGRAPH

S3

TIMER

S3

ALARM

S3

SAFETY RANGE SET

S4

S3

S1

S2

S2

PULSE RATE MONITOR

S2

PULSE RATE MONITOR

S2

S1

S2

2

SECOND

S3

S3

MINUTE HOUR WEEKDAY

S3 S3

12H/24H DATE MONTH

S3 S3

S3

- After all adjustments are completed, press button S2 to exit the setting mode.
Remark:

1. When the seconds digits count between 30 to 59 and the button S1 is pressed while in setting mode, the
seconds are reset to 00 and one minute is added.

2. If 24 Hr display format is selected, there is no AM flag “A” or PM flag “P”.

3. If there is no button operation for 2-3 minutes in setting mode, the watch will return back to Normal Time mode
automatically.

4. Press button S2 to enter or exit Pulse Rate Monitor mode.

(F) HOW TO USE CHRONOGRAPH

S4

S1

S3

S2

- Press button S3 to show Chronograph mode, “CH” displayed in the bracket.

- Press button S1 to start the chronograph, “RUN” will be displayed.

- Press button S4 to take split times (“SPL” displayed), the display will freeze at total accumulated time for about
10 seconds, then the display will return to the current running time automatically. Press button S3 for fast
escape.

- Press button S1 to stop the chronograph. Then press button S1 to start the chronograph again or press button
S4 to reset the chronograph to 00’00”00.
Remark:

1. The chronograph is with 1/100-second resolution up to 100 hours.

2. Press button S2 to enter or exit Pulse Rate Monitor mode.

(G) HOW TO USE THE COUNT DOWN TIMERS

S4

S1

S3

S2

- Press button S3 to show Timer mode, “CS”, “Cr” or “CU” displayed in the bracket.

- Press button S4 to select Count Down Stop “CS”, Count Down Repeat “Cr” or Count Down /Up “CU” function.

- Press & hold button S2 for 3-4 seconds to enter setting mode. The minute digit start flashing.

- With each press of button S1, the selected digits to be adjusted (flashing) can be made. Press & hold button S1
for fast setting.

- Press button S3 to select minute or hour digit for setting.

- After all adjustments are completed, press button S2 to exit the setting mode.

- Press button S1 to start the timer.
Remark:

1. The count down timer is with 1-second resolution and with working range from 1 minute to 19 hours 59
minutes.

2. The watch will give out 5 “BEEP” at 5 minutes, 3 “BEEP” at 3 minutes and 1 “BEEP” at 1 minute, 5 sec.,

4 sec., 3 sec., 2 sec. and 1 sec. before the timer count down to zero. And the watch will beep for 1-2 seconds
when the timer count down to zero.

3. If there is no button operation for 2-3 minutes in setting mode, the watch will return back to Timer mode

automatically.

3