Robic SC-577 User Manual

OPERATING INSTRUCTIONS FOR Robic SC-577 Thank you for buying the Robic SC-577 300 memory personal training watch. Your purchase brings you a world

class watch with timekeeping functions suitable for a wide variety of activities. Please read a these instructions carefully to fully acquaint yourself with the many functions offered by the SC-577.

(A) FEATURES

The SC-577 is a multi-function watch providing Dual Time, Timer, Alarm, Chronograph and Chronograph Recall. The main features are listed as follows:

- Direct Mode Selection.

- 6 modes of operation: Normal Time (T1), Dual Time (T2), Timer, Alarm, Chronograph and Chronograph Recall.

- Normal Time mode presents weekday, hours, minutes, seconds, month, day and “T1” (year can also be set).

- Dual Time mode presents weekday, hours, minutes, seconds, month, day and “T2” (year can also be set).

- 2 display formats of time selectable, one with enlarged hour and minute digits.

- 12/24-hour display formats selectable.

- Month-day or day-month display formats selectable.

- Auto calendar from 1990-2049.

- 2 Count Down Timers selectable. One timer works in loop structure and the other one is a count down stop timer. The timers are of 1-second resolution and with working range up to 23 hours 59 minutes 59 seconds.

- 6 alarms that can be set to refer to T1 or T2. 2 are daily alarms, 2 are weekday alarms and 2 are date alarms.

- Hourly chime signal, chime “on” with button confirmation sound.

- 1/100-second chronograph with working range up to 24 hours.

- Both “Lap” and “Split” time can be taken.

- 300 lap memories that can be stored in a maximum for recall.

- Each segment stores the segment number, month, day, weekday and lap data for recall.

- 3 seconds light up EL back light. (B) EL BACK LIGHT

Press S4 for EL back light with 3 seconds auto light up. (C) BASIC OPERATION OF BUTTONS

S1: - ENTER ALARM MODE (MODE SELECTION DISPLAY)

- TOGGLE DISPLAY FORMATS OF TIME

- START TIMER

- TOGGLE DISPLAY FORMATS OF TIMER (TIMER COUNTING)

- TOGGLE ALARM AND CHIME ON OR OFF

- START/LAP OF CHRONOGRAPH

- FORWARD SELECTION OF LAP NUMBER IN SEGMENT

- FORWARD SETTING (SET) S2: - ENTER CHRONOGRAPH MODE (MODE SELECTION DISPLAY)

- VIEW NORMAL TIME OR DUAL TIME

- TOGGLE NORMAL TIME OR DUAL TIME (PRESS AND HOLD)

- SELECT TIMER (TIMER RESET OR RELOADED)

- STOP TIMER

CHIME ICON ALARM ICON

S4 S1

S3 S2

- RESET TIMER (PRESS AND HOLD WHEN TIMER IS STOPPED)

- SELECT ALARM NUMBER AND CHIME

- STOP CHRONOGRAPH

- SHOW FREE LAP NUMBER (CHRONOGRAPH STOPPED)

- SELECT SEGMENT

- REVERSE SETTING (SET) S3: - ENTER MODE SELECTION DISPLAY

- ENTER TIME MODE (MODE SELECTION DISPLAY)

- SELECT SETTING (SET) S4: - ENTER TIMER MODE (MODE SELECTION DISPLAY)

- EL BACK LIGHT

- SET (PRESS AND HOLD)

- RELOAD TIMER (TIMER STOPPED)

- STORE SEGMENT AND RESET CHRONOGRAPH (PRESS AND HOLD)

- CLEAR SEGMENT (PRESS AND HOLD)

- EXIT (SET) S5: - ENTER CHRONOGRAPH RECALL MODE (MODE SELECTION DISPLAY)

- SHOW TIME FOR 3 SECONDS

- REVERSE SELECTION OF LAP NUMBER IN SEGMENT (D) MODE CHANGE OPERATION

At any mode (except setting), press S3 will enter mode selection display and a “Beep” sound will be given. Then press the corresponding button to enter the desired mode directly.

(E) HOW TO SET NORMAL TIME AND DUAL TIME

- At mode selection display, press S3 to enter Normal Time mode (T1) or Dual Time mode (T2), mode prompt “TIME” will be displayed for 2 seconds first.

- Press and hold S2 for 2 seconds to toggle Normal Time mode or Dual Time mode.

- Press S1 to toggle between the 2 display formats of time, one with enlarged hour and minute digits.

- Press and hold S4 for 3 seconds (“SET HOLD” displayed) to enter setting mode. The second digits start flashing.

- Press S1 (forward) or S2 (reverse) to adjust the flashing digits. Press and hold S1 or S2 for fast setting.

- Press S3 to select the next digits, weekday, 12/24HR or M-D/D-M for setting. The sequence is shown as follow:

S3 S3

TIMER MODE

TIME MODE CHRONOGRAPH MODE

S4 S1

S3 S2

S3 S3

SECOND HOUR MINUTE

M-D/D-M

MODE SELECTION DISPLAY

S4 S1

S3 S2

CHRONOGRAPH RECALL MODE

S3 S3 S3

12/24HR WEEKDAY DAY

ANY MODE

ALARM MODE

YEAR

MONTH

- When setting seconds, pressing S1 or S2 while the second digits count between 30 to 59 will reset the second digits to 00 and 1 will be added to the minute digits.

- Year can be set from 1990 to 2049.

- When setting 12/24HR, press S1 or S2 to toggle 12-hour or 24-hour display formats. If 24-hour display format is selected, there will be no AM flag “A” or PM flag “P”.

- When setting M-D/D-M, press S1 or S2 to toggle month-day or day-month display formats.

- After all adjustments are completed, press S4 to exit the setting mode. Remarks:

1. Normal Time mode (T1) and Dual Time mode (T2) count up individually with the same second.

2. When Normal Time mode (T1) is displayed, press and hold S2 for not exceeding 2 seconds can view the dual time without changing the mode.

3. When Dual Time mode (T2) is displayed, press and hold S2 for not exceeding 2 seconds can view the normal time without changing the mode.

4. If there is no button operation for about 2 minutes in setting mode, the watch will automatically return back to Normal Time mode or Dual Time mode respectively.

5. To exit Time mode, press S3 will enter mode selection display.

(F) HOW TO USE THE TIMERS

- At mode selection display, press S4 to enter Timer mode, mode prompt “TIMER” will be displayed for 2 seconds

first.

- Press S2 to select TMR1 to TMR5 of “Loop” timer or count down stop timer.

(1) “Loop” timer

- Press and hold S4 for 3 seconds (“SET HOLD” displayed) to enter setting mode. The second digits start

flashing.

- Press S1 (forward) or S2 (reverse) to adjust the flashing digits. Press and hold S1 or S2 for fast setting.

- Press S3 to select the next digits or timer number for setting. The sequence is shown as follow:

- After all adjustments are completed, press S4 to exit the setting mode.

- Press S2 to select TMR1 to TMR5 as the beginning of the count down process.

- Press S1 to start the timer. The count down process will run through all set timers (TMR1 to TMR5) in loop

structure and when it pass the beginning again, repetition number (shown at the bottom row of the display) will increase by 1.

- When the timer is counting, press S1 can toggle between the display formats of timer.

- Press S2 to stop the timer, or the timer will stop automatically when repetition number reaches 30. Then press

S4 to reload preset timer time, or press and hold S2 for 2 seconds (“RST HOLD” displayed) to reset all timers (TMR1 to TMR5) to zeros. In both cases, repetition number is reset to zeros.

(2) Count down stop timer

- Press and hold S4 for 3 seconds (“SET HOLD” displayed) to enter setting mode. The second digits start

flashing.

- Press S1 (forward) or S2 (reverse) to adjust the flashing digits. Press and hold S1 or S2 for fast setting.

- Press S3 to select the next digits for setting. The sequence is shown as follow:

TMR1 OF “LOOP” TIMER COUNT DOWN STOP TIMER

MINUTESECOND

S1 PRESET TIME

S3 S3

HOUR TIMER NUMBER

COUNT DOWN TIME

+ 4 hidden pages

Robic SC-577 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual