Roberts Travel Pad User Manual

Portable Bluetooth Speaker with built-in rechargeable battery

ROBERTS

Please read this manual before use

Controls

Front

1

2

3

4

5

6

7

8

910

1. Speakers

2. Battery charge indicator

3. Power On / Off button

4. Battery status indicator

5. Volume Up button

1

6. Maximum volume indicator

7. Volume Down button

8. Bluetooth / Hands Free Call / Play / Pause button

9. Bluetooth status indicator

10. Microphone

Controls

Rear

11

11. NFC detection area

12. Carry strap holder

13. Power lock switch

14. Auxiliary input socket

Right hand side

12

13

14

15

N16269

15. DC in (adaptor not supplied)

16. Micro USB cable (supplied in the box)

17. Audio cable (supplied in the box)

Note: Carry strap is not supplied

2

About your Bluetooth Speaker

The TravelPad Bluetooth speaker allows you to play audio, play sound from video fi les and stream music from Bluetooth capable devices such as your
moblie phone, computer, tablet etc. Its built-in rechargeable battery allows use away from a source of power for up to 12 hours. Your speaker also has a
built-in mircophone so that you may receive a phone call through your speaker whilst your music is paused on your smart phone. The Bluetooth connection
can provide a link for audio up to a distance of approximately ten metres.

Powering your Bluetooth Speaker

You can use your Bluetooth speaker with the USB charge cable connected or without
the USB charge cable once the built-in battery has been fully charged.

1. Place the speaker on a fl at surface.

2. Insert the USB cable into the USB socket on a PC, mains adaptor with USB
output of 5V 1A (not supplied) or other USB charging device.

3. Plug the micro USB connector on the cable into the DC in socket on the speaker.

USB charging socket

on PC or other USB

charging device.

4. The red battery charge indicator will light showing that the internal battery is
charging. Depending on the battery condition charging may take up to 5 hours.
You can charge your speaker whether it is on or off and regardless of the position
of the power lock switch.

5. The red battery charge indicator remains lit while charging is taking place and
will turn off when the speaker is fully charged. Once fully charged the battery will
power your speaker for up to 12 hours depending on the volume level.

6. If you need to use the speaker continually you may keep it connected to the USB
charging device while in use.

7. If not using the speaker for a long time (longer than a few days) we recommend
that the battery is charged and then the unit is switched off. Set the Power Lock
switch to the lock (Up) position.

Battery status indicator

To check the current battery level, press and hold the Power
On / Off button to switch on the speaker and the battery status

indicator will show on the front panel in solid green indicating
the current battery level.

Battery is fully charged (more than 70% of battery capacity)

Battery is partially charged (between 30 - 70% of battery capacity)

Battery needs charging (less than 30% of battery capacity)

The greatest working life from the built-in battery will be obtained
if it is kept topped up by recharging after each use of the speaker,
even if it is only partially discharged. The battery’s working life
will be reduced if the product is left in a discharged condition for
a long period of time.

IMPORTANT: The battery should not be exposed to excessive
heat such as sunshine, fi re or the like. When the product is no
longer required it should be taken to a suitable recycling centre.

3