Roberts Stream217 Instruction Manual
ROBERTS
DAB/FM/WiFi Internet Radio with Music Player
and Spotify Connect
and remote control from iPhone and Android using UNDOK
Please read this manual before use
Contents
Introduction ......................................................................................... 1-6
Before you can use this product .......................................................... 1
About this instruction manual............................................................... 2
Controls and connections ................................................................. 3-4
Battery operation ................................................................................. 5
Navigation controls .............................................................................. 6
Confi guration .................................................................................... 7-18
Plugging in and language selection .................................................. 7-8
Clock and time settings ....................................................................... 9
Connecting to your computer network .......................................... 10-14
Manual network confi guration....................................................... 15-17
Network remote control options ......................................................... 18
Internet Radio mode ....................................................................... 19-35
Internet Radio - the basics................................................................. 19
Selecting a radio station by location and genre ............................ 20-22
Searching for a radio station by name ............................................... 23
Selecting a new or popular station .................................................... 24
Selecting a podcast ........................................................................... 25
Presetting stations ........................................................................ 26-27
Display modes .............................................................................. 29-30
Customising your radio ................................................................. 31-35
Music Player mode ......................................................................... 36-51
Use with Windows, Apple Mac, Linux, USB memory ........................ 36
Accessing your audio fi les via UPnP using Windows 7, 8, & 10 ...37-38
Locating and playing media fi les using UPnP ..............................39-42
Display modes ................................................................................... 43
Using USB memory devices ......................................................... 44-45
Playlists ........................................................................................46-48
Prune servers .................................................................................... 49
Wake On LAN .................................................................................... 49
Windows 'Play To' / 'Cast to Device' function (UPnP renderer) .... 50-51
Spotify Connect .............................................................................. 52-56
Spotify Connect - the basics .............................................................. 52
Set up a Spotify Connect account ..................................................... 52
Playing music using Spotify Connect ................................................ 53
Controlling Spotify on your radio ....................................................... 54
Display modes - Spotify Connect ...................................................... 55
Streaming data rate ........................................................................... 56
Friendly name .................................................................................... 56
DAB mode ...................................................................................... 57-65
Selecting a DAB radio station ............................................................ 58
Display modes .............................................................................. 59-60
Finding new DAB radio stations ........................................................ 61
Manual Tuning ................................................................................... 62
Dynamic Range Control settings ...................................................... 63
Station order setup ............................................................................ 64
Prune stations.................................................................................... 65
FM mode .......................................................................................... 66-72
Manual tuning .................................................................................... 67
Display modes ................................................................................... 68
Scan setting ....................................................................................... 69
Stereo / Mono switching .................................................................... 70
Presetting stations in DAB and FM modes ................................... 71-72
Clock and Alarms ........................................................................... 73-81
Automatically updating the clock ....................................................... 73
Setting the clock format ..................................................................... 74
Manually setting the clock ............................................................75-76
Setting the alarm clock ................................................................. 77-79
Snooze timer ..................................................................................... 80
Disabling alarms ................................................................................ 80
Sleep timer ........................................................................................ 81
Display and Audio .......................................................................... 82-86
Equaliser function ......................................................................... 82-83
Brightness control .............................................................................. 84
Headphone socket............................................................................. 85
Auxiliary input socket ......................................................................... 85
Inactive Standby feature .................................................................... 86
Information .................................................................................... 87-100
Factory reset...................................................................................... 87
Software update ................................................................................ 88
Network profi les & Clearing network settings ............................... 89-90
Software version display and Audio FAQ .......................................... 91
Friendly name .................................................................................... 92
Troubleshooting ............................................................................ 93-94
Audio codecs ..................................................................................... 95
Cautions and Specifi cations .........................................................96-97
Software License Information ............................................................ 98
Guarantee........................................................................................ 100
Stream 217 Internet Radio features
The Roberts Stream 217 provides the following features in an attractive
compact unit:-
● Listen to local, regional, national and international broadcasts using
FM, DAB and Internet radio.
● Listen to over 1000 radio stations from around the country, and over
10,000 from around the world without using your PC.
● Listen to podcasts from a wide range of broadcasters.
● 120 radio station presets (40 Internet Radio, 40 DAB and 40 FM).
● Use the Music Player to play your music collection from your
computer. Connection to Apple and Linux based computers is also
possible.
● Playback of audio fi les from USB memory devices.
● MP3, WMA, AAC, FLAC, ALAC (Apple Lossless) and WAV formats
are supported.
● The Stream 217 connects to your home computer network, either
using WiFi or via a wired Ethernet connection.
● WiFi Protected Setup (WPS) is supported for simpler setting up with
compatible wireless routers.
● Works with Windows 'Play to' / 'Cast to Device' function (as a UPnP
renderer).
● Compatible with Spotify Connect, allowing your Spotify selections to
be played through the radio, remotely controlled from your iPhone,
iPad, Android device or any Desktop.
● Supports remote control from Apple iPhone, iPad and Android using
the UNDOK app.
● All radio station presets, network confi guration details and user
settings are retained in the event of a power failure.
● Large clock display with time and date when in Standby.
● Two alarm timers with snooze feature to wake you to either a buzzer
or a radio alarm.
● Adjustable sleep timer, can be set to turn the radio off after a delay of
between 5 and 120 minutes.
● Power saving Inactive Standby.
● Easy-to-read colour graphic display with an adjustable display
backlight.
● Auxiliary input for playing audio from MP3 players, iPods or other
audio equipment.
● Stereo headphone socket for private listening.
● Mains or battery powered operation using supplied mains adaptor, or
6 x LR20 (D size) alkaline cells (not included).
Before you can use this product
Before you can use your internet radio, you must have the following:
● A broadband Internet connection (not required for DAB, FM or Music Player functions).
● A router (or equivalent wireless access point) providing a WiFi signal or Ethernet connection,
connected to your broadband Internet Service Provider. The broadband modem, router and
wireless access point will often be a single combined unit supplied by your Internet Service
Provider or bought from a computer store.
● If your wireless network requires a security password to allow connection, then you either
need to know the WEP, WPA or WPA2 key used for encryption so that you can get the radio
to communicate with the network, or your router needs to offer WiFi Protected Setup (WPS).
● If you choose to connect the radio to your network using a wired Ethernet connection, then
an Ethernet cable of appropriate length will be needed. If it is intended to listen to FM radio
extensively, then there may be benefi t in using a shielded Ethernet cable since this may
reduce possible interference to the radio.
The radio's WiFi system is compatible with 802.11b, g, or n networks.
If connecting using WiFi, the radio will typically work within a 10-20 metre radius from your
wireless router or access point. The actual range achieved will depend upon the building type,
other nearby wireless networks, and possible interference sources. DAB and FM radio functions
can operate wherever the radio is able to receive a suitable broadcast signal.
IMPORTANT: Before you continue, make sure that your router (or access point) is powered up
and working with your broadband Internet service (use your computer, smart-phone or tablet
to verify this). To get this part of the system working you must refer to the instructions supplied
with those items.
1
About this instruction manual
This instruction manual is split into sections for each of the operating modes
of your Roberts Stream 217 internet radio. Each section is clearly identifi ed
by the shaded heading in the top right hand corner of each pair of pages.
Before using the Internet Radio and Music Player functions, you will need
to connect your radio to your computer network using either the WiFi or
Ethernet connection. This is covered in the section titled Confi guration.
This section also explains how to set the menu language option.
The Internet Radio section describes how to fi nd radio stations to
listen to. These can be radio stations that you already know and listen
to conventionally, or new stations you may search for. You may set up
stations that you like as Favourites so that they are more readily accessible.
The section for the Music Player describes how you may play music
fi les that you may have stored on a computer connected to your network.
The use of Shared Media (using UPnP) and USB playback is explained.
The Spotify Connect section explains the use of the radio in conjunction
with the Spotify internet based music streaming service.
The two sections for DAB and FM Radio describe how to use the radio
to listen to conventional radio broadcasts.
The section titled Clock and Alarms describes the different ways by
which the clock in the radio may be set, as well as explaining the use of
the alarms, snooze and sleep timer features.
The Display and Audio section shows how to adjust the display, use the
equaliser and connect your radio to other audio equipment.
The Information section includes troubleshooting, specifi cations and
warranty information.
2
Confi guration
Internet Radio
Music Player
DAB Radio
FM Radio
Clock and Alarms
Display and Audio
(page 7)
(page 36)
(page 19)
(page 66)
(page 57)
(page 73)
(page 82)
Information
(page 87)
Introduction
Spotify Connect
(page 52)
3
Controls and connections
Front view
1. Speakers x 2
2. Forward button
3. Back button
4. Preset 5 / Play button
5. Preset 4 / Pause button
6. Preset 3 / Stop button
7. Preset 2 / Next button
8. Preset 1 / Previous button
9. Preset menu button
10. Info button
11. Volume control / EQ select
12. WiFi internal antenna
13. Alarm / Sleep button
14. On / Standby button
15. Display panel
16. Mode button
17. Menu button
18. Tuning / Select / Snooze control
11
1
1
10
9
13 14 15 16 17
18
2345678
12
DC
4
Controls and connections - cont.
Rear view
19. Telescopic aerial for DAB and FM radio (antenna cable socket behind)
20. Ethernet socket (RJ-45)
21. USB playback socket
22. Headphone socket
23. Auxiliary Input socket
24. DC input socket
25. Battery compartment
Introduction
19
25
20 2221 23
24
5
Battery operation
We recommend for economy that the Stream 217 is used with the AC
adaptor whenever possible with battery operation for occasional use only.
Inserting the adaptor into the DC input socket will disconnect the batteries.
If using batteries, only alkaline types should normally be used. Battery life
will vary according to the operating mode of the radio, listening volume,
battery type and temperature. Using quality branded Alkaline batteries,
between 40 and 75 hours should be possible. WiFi takes much more
power than DAB listening for example.
To install batteries in your radio follow these steps.
1. Remove the battery cover on the rear of the unit by pushing the battery
door in and downwards.
2. Insert six LR20 (D size) batteries into the spaces in the compartment.
Take care to ensure all batteries are inserted with the correct polarity
as shown inside the battery compartment.
3. Replace the battery cover.
Reduced power, audio distortion or the radio switching itself off are all
signs that the batteries may need replacing.
If the radio is not to be used for any extended period of time it is recommended
that the batteries are removed from the radio.
Rechargeable Nickel Metal Hydride (NiMH) cells can be used in the radio
but must be charged outside the radio using an external charger. Note
that readily available D size NiMH cells have a capacity which is only a
small fraction of that of D size Alkaline cells and so they will power the
radio for only a few hours before needing recharging. Never mix batteries
of different types, capacities or brands in the radio.
IMPORTANT: The batteries should not be exposed to excessive heat
such as sunshine, fi re or the like. After use, disposable batteries should
if possible be taken to a suitable recycling centre. On no account
should batteries be disposed of by incineration.
DC
1
Introduction
6
Navigation controls
This page describes the basic means of controlling your Stream 217 radio.
Instructions for each operating mode are given in the later sections of this book.
1. Pressing the On/Standby button brings your internet radio out of Standby
mode if running from the mains or switches it on if using batteries.
Pressing the On/Standby button while the internet radio is in use will cause
it to return to the Standby mode with the clock display when running from
the mains, or will switch it off after a short delay when running on batteries.
2. Pressing the Mode button gives you access to each of the operating modes
in turn: Internet Radio, Spotify, Music Player, DAB Radio, FM Radio and
Auxiliary Input. Alternatively press the Mode button and then turn the
Tuning/Select control clockwise or anti-clockwise to highlight the desired
menu item then press the control to select that item.
3. Pressing the Menu button will access the menu system.
4. Many operations require the user to make a selection from the menu. This
is done using the Tuning/Select control. Turn the control clockwise or
anti-clockwise to highlight the desired menu item then press the control to
select that item.
If there are more than six items in a menu, then the display will automatically
scroll up or down so that the additional items become visible. A sliding bar
on the right will give an indication showing the current portion of the menu
that is displayed. If there are many items in a menu, then the radio allows
the menu to 'wrap around' in either direction. This can make it easier to
reach items at the end of a long menu, such as a list of countries or Internet
radio stations.
5. The Forward button may also be used to make selections from the displayed
menu. If an error is made when navigating the menus, it is generally possible
to go back to a higher level menu by pressing the Back button.
6. The Info button allows the display of information relating to the radio station
or music fi le being played. A long press of the Info button also allows direct
access to the brightness control menu.
Note: In this booklet, press always means press and release. If it is required
to give a long press on a button this is described as press and hold.
2
3
5
5
Internet radio
Spotify
Music player
DAB
FM
Aux In
Main menu
1
6
2
DAB Radio
My Music
FM Radio
Internet radio
h
ttp:
/
/
Internet
Radio
AUX
4
7
DC
Confi guration
Plugging in and language selection
1. Place your radio on a fl at surface and plug the cable from the mains adaptor
into the DC input socket located at the rear of your radio (marked 'DC 9V')
ensuring that the plug is pushed fully into the socket.
2. If you wish to use a wired network connection, plug the Ethernet cable into
the RJ-45 socket at the back of the radio.
3. Plug the mains adaptor into a wall socket and switch on the socket.
IMPORTANT: The mains adaptor is used as the means of connecting the
radio to the mains supply. The mains socket used for the radio must remain
accessible during normal use. In order to disconnect the radio from the
mains, the mains adaptor should be removed from the mains socket outlet
completely.
4. When you apply power, the display on the radio will light up and say:
'ROBERTS' and 'Stream 217'. After a few seconds the radio will then enter
Standby and the clock will display '00:00' as shown.
To continue to setup your radio press and release the On/Standby button.
If this is the fi rst time that you use your radio (or after a Factory Reset) the
display will show 'Setup wizard' and 'YES' will be highlighted on the screen.
5. By default your radio will display all menus and messages in English.
If English is your preferred language then press the Tuning/Select control
to select 'YES' and to begin setting up your radio.
If you selected 'YES' please skip to step 1 on page 9.
6. If your preferred language is not English, then rotate the Tuning/Select
control so that the 'NO' option is highlighted. Press the Tuning/Select control
to enter the selection.
Continue on the next page.
Setup wizard
Start now?
Setup wizard
Start now?
4
5,6
Confi guration
8
Setup wizard
Run wizard again
at next start up?
Plugging in and language selection - cont.
7. Your radio will ask whether the Setup Wizard should be run at the next start
up. Although the 'YES' option is highlighted if you wish to change the language
you will need to select the 'NO' option.
Rotate the Tuning/Select control to highlight the 'NO' option. Press the Tuning/
Select control.
8. Your radio will then display the Main menu. Rotate the Tuning/Select control
until ‘System settings’ is highlighted on the screen.
Press the Tuning/Select control to enter the System Settings menu.
9. Rotate the Tuning/Select control until ‘Language’ is highlighted on the screen.
Press the Tuning/Select control to enter the Language menu.
10. Rotate the Tuning/Select control until the desired language is highlighted on
the screen.
Press the Tuning/Select control to select the chosen language option.
The display will then change to show the System Settings menu in the chosen
language.
11. Rotate the Tuning/Select control until the ‘Setup wizard’ option is highlighted
on the screen and then press the control.
If you change the language you will not see 'Setup wizard' in English. You
will see an equivalent menu item in your language - for example, 'Assistant
réglages' in French, or 'Inställningsguide' in Swedish.
12. Rotate the Tuning/Select control until ‘YES’ is highlighted on the screen and
press the control to select it.
This will cause the radio to run the set up procedure as if it had just been
switched on for the fi rst time, but it will do this using the language selected in
step 10, above.
13. Continue setting up your radio on the next page.
DAB
FM
Aux In
Sleep
Alarms
System settings
Main menu
Equaliser
Network
Time/Date
Brightness
Language
Fact ory Re set
System settings
English
Français
Deutsch
Italiano
Dansk
Nederlands
Language
*
Brightness
Language
Factory Reset
Software update
Setup wizard
Info
System settings
Setup wizard
Start now?
7-12
Date/Time
12/24 hour format
Clock and time settings
The following instructions assume that you have either just plugged in your radio
(see page 7) or that you have just specifi ed the language option for the menus
(see page 8).
1. Rotate the Tuning/Select control to highlight the desired clock format (either
12 or 24 hour) then press the control to enter your selection.
2. Next, the way in which the radio updates its clock is set. A menu allowing you
to specify the auto-update option for the clock will be shown. The 'Update
from Network' option will be best for most users.
3. Rotate the Tuning/Select control to choose an auto-update option for the
clock. This can be updated from DAB or FM radio, from the Network, or not
updated. The default is to auto-update from the network. If you choose another
option go to 'Connecting to your computer network' on page 10. Otherwise
you will fi rst need to select the correct time zone and daylight savings setting,
see the next steps. If you choose 'No update' you will need to set the clock
manually later, see page 75. Press the control to confi rm your choice.
4. Rotate the Tuning/Select control to highlight the time zone for your current
location. Press the Tuning/Select control to enter the setting.
5. You will then need to set the Daylight Savings option according to your
location (Daylight Savings is also known as Summer/Winter time or BST/
GMT adjustment).
Rotate the Tuning/Select control to highlight 'ON' or 'OFF' as required. The
asterisk shows the current setting. Press the control to enter the selection.
In the UK, 'ON' is equivalent to British Summer Time and 'OFF' is equivalent
to Greenwich Mean Time.
6. Continue setting up your radio on the next page.
9
Auto update
Update from DAB
Update from FM
Update from Network
No update
*
UTC + 00:00: Dublin, Lond
UTC + 00:30:
UTC + 01:00: Madrid, Am
UTC + 01:30:
UTC + 02:00: Athens, Cair
UTC + 02:30:
Set timezone
*
Daylight savings
Daylight savings
1-5
Confi guration
10
Connecting to your computer network
Before you can use your Stream 217 radio to listen to Internet radio or to music streamed from your computer, it
must fi rst be connected to your computer network.
This section of this book describes how to connect the radio to your network using either the wireless (WiFi)
connection or the wired (Ethernet) connection.
The following instructions assume that you have just set up the clock and time options using the Setup Wizard
as described on the preceding page.
These instructions also apply to the Network Wizard in the Network Settings menu (from step 2 onwards).
1. After setting the Daylight Savings options (see page 9), the display will show the 'Keep network connected?'
option. You should choose 'Yes' if you wish to keep the radio connected to the network when it is in Standby
mode. This will allow remote control software to switch on your radio when needed.
If you choose 'No' then your radio will shut down its WiFi or Ethernet connection when it is in Standby, DAB,
FM or Aux-in modes. This minimises power consumption but it does mean that you will need to switch the
radio on manually in order to use either Spotify Connect, the 'Play to' / 'Cast to Device' function or any remote
control software such as the UNDOK app.
Rotate the Tuning/Select control to highlight the required option and then press the control to make the
selection.
After setting the Keep Connected option, the display will show a list of supported WiFi regional options.
Rotate the Tuning/Select control to highlight the required region (for the UK choose 'Most of Europe'), and
then press the control to make the selection. Do this even if you are planning to use the wired Ethernet
connection. Your radio will then scan for available WiFi networks.
2. The radio will enter the Network Settings Wizard and will display 'Scanning...'. The radio will automatically
scan the 2.4GHz WiFi band and after a short while the display will show a list of the available WiFi networks.
If you are intending to use the WiFi connection, go to step 3 on the next page.
To use the Ethernet connection to your router (with automatic confi guration), rotate the Tuning/Select control
to point to the '[Wired]' menu item. Press the control and the radio will attempt to connect.
If your network allows automatic confi guration (which is normal) the radio will acquire a network address.
The screen should say 'Connecting...', and then 'Setup wizard completed'. Press the Tuning/Select control
to exit the setup wizard and show the Main menu. You can then skip to paragraph 10 on page 13.
[WPS]Smith
Jones
Paul’s network
[Rescan]
[Wired]
[Manual config]
SSID
Waiting for
Ethernet
Please wait
Network settings
Network wizard
Scanning...
Wlan region
Most of Europe
*
Network settings
Keep network connected?
11
Connecting to your computer network - cont.
There are two indicator lights incorporated into the RJ-45 connector. If you
have problems with your wired connection, they may help you to identify the
possible cause of the problem.
Green ON = Link established; OFF = no connection
Yellow Flashing = Data transfer
If your network does not support automatic confi guration or if you wish to set
it up manually then you should select '[Manual confi g]' instead of selecting
'[Wired]' in the Network Wizard, then go to page 15.
3. If you plan to use a WiFi connection, you will fi rst need to identify your network
in the list of network names presented by the Network Wizard. If no networks
are found then you may have to get your wireless router working (please see
the instructions supplied with it) or you may be too far from the router.
When the radio fi nds your wireless network, it displays the Network Name (SSID)
for the wireless access point on the screen. This is a name that is allocated
to the access point in your router by the person who set up the network - for
example: 'Jones family' or 'Paul's network'. Routers supplied by Internet Service
Providers often have the default name of the WiFi network provided on a label
or card for easy reference (e.g. BTHub - 1234, virginmedia 1234567). If the
router supports WiFi Protected Setup, then '[WPS]' will be shown in front of
the SSID.
It is possible, and in some locations highly likely, that your radio will fi nd more
than one wireless network, in which case you should choose which one you
need to connect to.
4. Rotate the Tuning/Select control to see the SSID for each wireless network
that has been found. If your network is shown proceed to step 6 on the next
page. If it is not shown then proceed to step 5, also on the next page.
If you make a mistake at any point, use the Back button to go back to the
previous screen.
Jones family
[WPS] Paul’s network
Smith
[Rescan]
[Wired]
[Manual config]
SSID
Internet radio
Spotify
Music player
DAB
FM
Aux In
Main menu
Setup wizard
Setup wizard
completed
Press ‘SELECT’ to exit
Network settings
Network wizard
Scanning...
3-4
12
Confi guration
Connecting to your computer network - cont.
5. If your network is not found, it may be because the router is confi gured not to broadcast the SSID. You
should then use the Tuning/Select control to highlight and select the '[Manual confi g]' option in order to
enter the network details manually. This is described in 'Manual Network Confi guration', see page 15.
If your network name is being broadcast, and it was not found, then try re-scanning (press the Back
button), and if necessary try moving your radio to a location closer to your access point / router.
6. When the SSID for the wireless network you wish to connect to is highlighted on the screen, press the
Select control. If WiFi Protected Setup (WPS) was indicated, you will see an additional menu at this point,
otherwise proceed to step 7.
Choose one of the WPS menu options as required for your router (WPS may be via push button, or using
an identifi cation number).
'Push Button' - the display prompts you to press the WPS button on your router and then the Select control
on the radio. The two devices should then connect with the encryption key sent automatically to the radio.
'PIN' - the display shows an identifi cation number which you must enter into your router using a web browser
(refer to your router's user documentation). You should then press the Select control on the radio. The
two devices should then connect with the encryption key sent automatically to the radio.
'Skip WPS' - if you wish to enter the encryption key yourself (or if it was previously entered).
If you chose Push Button or PIN the screen will then show 'Connecting...' and then 'Setup wizard completed'.
Press the Tuning/Select control to exit the setup wizard and then go to paragraph 10 on the next page.
7. If your network is confi gured without an encryption key, the screen should say 'Connecting...', and then
'Setup wizard completed'. Press the Tuning/Select control to exit the setup wizard and show the Main
menu. If this is the case then you have successfully connected your radio to your network, so please go
to paragraph 10 on the next page.
8. If the screen displays 'Key:', it is because the network is using one of the encryption systems: Wired
Equivalent Privacy (WEP) or WiFi Protected Access (WPA). You will need to enter the correct WEP or
WPA key into the radio to allow it to communicate with your wireless network. If you do not have the WEP
or WPA key, then you should obtain it from the person who set up your network. Some wireless routers
may come with an encryption key already set up by the supplier, in which case you should refer to the
documentation provided with it. WPA is used here to also include WPA2.
Jones family
[WPS] Paul’s network
Smith
[Rescan]
[Wired]
[Manual config]
SSID
Network settings
Please wait
Connecting...
Key:
0 1 2 3 4 5 6
7 8 9 . _ - @
, a b c d e
f g h i j k l
m n o p q r s
Push Button
PIN
Skip WPS
WPS Menu
Jones family
[WPS] Paul’s network
Smith
[Rescan]
[Wired]
[Manual config]
SSID
13
Connecting to your computer network - cont.
WEP keys are 10 or 26 characters long (using 0 - 9, and A - F). Some wireless
routers can also use pass-phrases for WEP but these are not supported by the
radio. WPA keys are usually set up using a pass-phrase of between 8 and 63
characters. Your radio accepts pass-phrases for WPA keys.
9. To enter the WEP or WPA key, characters are selected and entered using the
Tuning/Select control. As you rotate the control, the highlight scrolls through
the available characters as well as the three controls on the right. The character
currently highlighted will be entered when you press the Tuning/Select control.
Do this as needed until the complete key has been entered. Remember, WEP
keys only use the numbers 0-9 and letters A-F. WPA keys are sensitive to upper
and lower case characters. You must enter the key exactly or the radio will not
connect to the network.
The three controls on the right-hand side of the screen have special functions. You
can quickly access these by pressing the Info button and then using the Tuning/
Select control as needed:
select '
' to erase a character just entered (long press to clear); Info
again to continue
select '
' when the complete key has been entered
select '
' to cancel and re-run the Network Wizard
If a WEP or WPA key has previously been entered for the selected SSID then the
radio will attempt to connect. If you have previously entered a different key, then
the connection will fail, and you will need to enter the new, correct key.
After the fi nal character of the WEP or WPA key has been entered, highlight the '
symbol and press the Tuning/Select control. The screen will show 'Connecting...'
and then 'Setup wizard completed'. Press the Tuning/Select control to the exit
setup wizard. The radio should now be able to connect to the network.
10. Once you have connected your radio to the network (and therefore also to the
Internet) it will display the Main menu. Press the On/Standby button to put the radio
into Standby mode. It should then display the time as obtained from the Internet.
If the time display is not correct for any reason, it can easily be adjusted later, see
page 75, 'Manually setting the clock'.
Key:
0 1 2 3 4 5 6
7 8 9 . _ - @
, a b c d e
f g h i j k l
m n o p q r s
123- jones
Setup wizard
Setup wizard
completed
Press ‘SELECT’ to exit
Internet radio
Spotify
Music player
DAB
FM
Aux In
Main menu
Network settings
Please wait
Connecting...
9
5-9
10
14
Confi guration
Connecting to your computer network - cont.
If you have followed the steps on the preceding pages successfully, your radio will have connected to your
router, and then made a connection to the Internet and set its clock. If this is the case, then you can try
listening to radio stations via the Internet as described on page 19 onwards.
Changing the network connection
In the sections above, you chose how your radio would be connected to your network, either using a WiFi
connection or using a wired Ethernet cable. From time to time, you may fi nd that you need to connect
to different computer networks. The Network Settings menu allows you to change your radios’s network
settings, scan for an alternative wireless network, or to manually confi gure the network parameters.
The steps outlined below describe how you can do this - see also the section 'Network profi les' on page 89.
If you have no need to do this, however, please skip to page 19.
Confi guring the radio to use an alternative WiFi connection
1. From the Network Settings menu select 'Network wizard'. This will present you with details of any WiFi
networks that are found. Scroll down the list using the Tuning/Select control to the desired network
name. Press the control to select this network.
The radio will then use its WiFi system to communicate with the network. Depending on the settings for
the new network you may need to enter an encryption key (see pages 12-13). By default the radio will
then acquire an IP address and other network settings from the network's router using DHCP (Dynamic
Host Confi guration Protocol).
Confi guring the radio to use the wired Ethernet connection
2. Connect your radio to your router using an Ethernet cable plugged into the RJ-45 socket at the back
of the unit. From the Network Settings menu select 'Network wizard'. This will display a list of any WiFi
networks that are found. Scroll down the list and select the '[Wired]' option.
The radio will then use its Ethernet connection to communicate with the network. By default the unit will
then acquire an IP address and other network settings from the network's router using DHCP (Dynamic
Host Confi guration Protocol).
Last listened
Station list
System settings
Main menu
Internet radio
Equaliser
Network
Time/Date
Brightness
Language
Factory Reset
System settings
Network wizard
PBC Wlan setup
View settings
Wlan region
Manual settings
NetRemote PIN Setup
Network settings
[WPS]Smith
Jones
Paul’s network
[Rescan]
[Wired]
[Manual config]
SSID
Network settings
Network wizard
Scanning...
15
Manual network confi guration
If you do not wish to use DHCP for automatic confi guration, or if your network is confi gured with a hidden
SSID, then you will need to enter some network settings manually. (Note - a hidden SSID may prevent
casual observers from detecting your network, but it is not recommended as a means of network security.)
1. From the radios Network Settings menu, select 'Manual settings'. You must then choose whether to
connect using 'Wired' or 'Wireless' connections. If you choose 'Wireless' there are as many as nine
settings screens, shown by the '1 of 9' progress marker in the top right corner of the display. If you
choose 'Wired' there are fi ve screens and the progress marker will refl ect this, although the steps to
set up the network parameters are basically the same.
2. The next menu asks whether you wish to use DHCP to confi gure your network parameters (IP address,
subnet mask, gateway address, etc.). Unless you are familiar with networking and related terminology,
we recommend that you allow the use of DHCP. Choose 'DHCP enable' unless you need to specify
the network details manually.
If you have chosen 'Wired' and then 'DHCP enable', your radio should now establish a connection to
the router using the Ethernet cable. Please skip to step 11 on page 17.
If you chose 'Wireless' and 'DHCP enable', please skip to step 6 on page 16 in order to set up the
wireless connection details.
If you chose 'DHCP disable' for either connection method, the next step is to set up the IP address.
3. The manually specifi ed IP address should be chosen to be compatible with the settings in your router
and must be a unique address on your network. If you are using DHCP for some devices and static
(manually confi gured) IP addresses for others, the IP address used should fall outside the range that
the router may allocate using DHCP. Typically, the fi rst three groups of digits will be the same for all
devices on your network. To enter the IP address, rotate the Tuning/Select control to set the value for
each group of digits and then press the control to enter the value and to move on to the next group.
When the IP address has been entered, the subnet mask should be entered. The subnet mask defi nes
which parts of the IP address are common across your network. For most small networks the subnet
mask will be 255.255.255.0 and this is entered in the same way.
4. The Gateway address is normally the IP address of the router through which the radio connects to the
internet and is entered in the same way as the previous addresses.
Network wizard
PBC Wlan setup
View settings
Wlan region
Manual settings
NetRemote PIN Setup
Network settings
Connection type
Wired
Wireless
DHCP
DHCP enable
DHCP disable
IP settings
IP address
192 . 168 . 1 . 25
Subnet mask
255 . 255 . 255 . 0
Gateway address
Gateway address
192 . 168 . 1 . 1
16
Confi guration
DNS
Primary DNS
192 . 168 . 1 . 1
Secondary DNS
0 . 0 . 0 . 0
SSID:
0 1 2 3 4 5 6
7 8 9 . _ - @
, a b c d e
f g h i j k l
m n o p q r s
mynetwork
Open
WEP
WPA/WPA2
Authentication
Encryption type
PreSharedKey - TKIP
Manual network confi guration - cont.
5. In most installations the DNS settings (DNS = Domain Name Server) will be set to the same IP address
as your router. In this case the secondary DNS may be left at zero.
To enter the DNS address, rotate the Tuning/Select control to set the value for each group of digits
and then press the control to enter the value and to move on to the next group. Repeat this until all
eight groups of digits have been entered.
If you previously specifi ed 'Wired' and then 'DHCP disable', your radio should now connect to the router
using the Ethernet cable (in which case skip to step 11).
6. If you specifi ed 'Wireless', the next step is to set up the WiFi connection, starting with the name of the
wireless network (SSID) followed by the encryption options and password.
To enter the SSID, characters are selected and entered using the Tuning/Select control. As you rotate
the control, the radio scrolls through the available characters as well as the three controls on the right.
The character currently highlighted will be entered when you press the Tuning/Select control.
Do this as needed until the complete network name has been entered. The SSID setting is sensitive
to upper and lower case characters and symbols. You must enter it exactly as set up in your router.
The three controls on the right-hand side of the screen have special functions. You can quickly access
these by pressing the Info button and then use the Tuning/Select control as needed:
select '
' to erase a character just entered (long press to clear); Info again to continue
select '
' when the complete SSID has been entered
select '
' to cancel and go back to the DNS settings screen
7. Having entered the SSID, you must enter details of the encryption system used on your wireless
network. This should be the same as specifi ed in your router settings. If your network does not use
encryption, then select the 'Open' option. Your radio should then connect to the network, so skip to
step 11. If your network uses WEP (Wired Equivalent Privacy) select the 'WEP' option then go to step
8. The remaining options are for WPA or WPA2 (WiFi Protected Access) - see step 9.
8. If you chose 'WEP' in step 7, you should then choose the PreSharedKey - TKIP option. The key should
be entered using only the numbers 0-9 and the letters A-F. The key will be 10 characters long for 64-bit
encryption and 26 characters long for 128-bit encryption. The radio will accept lower-case letters a-f
as equivalent to upper-case A-F. Spaces or special symbols are not permitted in WEP keys.
Key:
0 1 2 3 4 5 6
7 8 9 . _ - @
, a b c d e
f g h i j k l
m n o p q r s
01234ABCDE
17
Open
WEP
WPA/WPA2
Authentication
Encryption type
PSK AES / TKIP
Key:
0 1 2 3 4 5 6
7 8 9 . _ - @
, a b c d e
f g h i j k l
m n o p q r s
01234ABCDE
Network settings
Please wait
Connecting...
Manual network confi guration - cont.
The three controls on the right-hand side of the screen have special functions. You can quickly access
these by pressing the Info button and then use the Tuning/Select control as needed:
select '
' to erase a character just entered (long press to clear); Info again to continue
select '
' when the complete encryption key has been entered
select '
' to cancel and go back to the SSID settings screen
Once the key is entered the radio should connect to your network. Please skip to step 11.
9. WPA and WPA2 are more secure than WEP, although of these two WPA2 offers a higher level of
security. Having selected WPA/WPA2 in step 7, you then have to specify the variant used. They are
AES (Advanced Encryption Standard) and TKIP (Temporal Key Integrity Protocol). Simply select the
'PSK AES/TKIP' menu option using the Tuning/Select control.
10. The radio will then require you to enter the encryption key. This must be a string of between 8 and
63 characters and must be identical to the key which has been entered into your router. Note - the
encryption key is sensitive to the use of upper and lower case letters and symbols. Take care to enter
the key exactly, or the radio will not be able to connect to your router.
The three controls on the right-hand side of the screen have special functions. You can quickly access
these by pressing the Info button and then use the Tuning/Select control as needed:
select '
' to erase a character just entered (long press to clear); Info again to continue
select '
' when the complete encryption key has been entered
select '
' to cancel and go back to the AES / TKIP options screen
Once the key is entered the radio should connect to the network.
11. While the radio is trying to connect to the network, it will display 'Connecting...'. If the connection is
made successfully, the radio will return to the Network Settings menu. If the unit cannot connect, then
it will display a 'Failed to connect' message and will return to the SSID entry screen (step 6).
Once connected, the network settings are stored in the radio. The settings are retained when the radio
is disconnected from the mains.
You may now use the Back and Mode buttons to access the functions of your internet radio.
Network wizard
PBC Wlan setup
View settings
Wlan region
Manual settings
NetRemote PIN Setup
Network settings
18
Confi guration
Network remote control options
Network PIN setup (PIN number)
Your radio has the option of being controlled by an application installed on an
Apple iPhone, iPod touch, iPad or equivalent Android device. The PIN number
facility allows you to ensure that your radio can only be controlled by your own
device rather than someone else's.
The remote control application is called UNDOK, by Frontier Silicon Limited, and
is available from the Apple App Store and Google Play Store for your device.
UNDOK will try to use the default PIN of '1234' to control your radio.
You may change the PIN if desired using the 'NetRemote PIN Setup' option in
the Network settings menu. The updated PIN should then be used in the UNDOK
app to allow the app to reconnect to the radio. The app will prompt you for the
PIN as needed.
Keep network connected
Your radio has the option to shut down its WiFi or Ethernet connection when it is in
Standby. This minimises power consumption but it does mean that you will need to
switch the radio on manually in order to use either Spotify Connect, the 'Play to' /
'Cast to Device' function or any remote control software such as the UNDOK app.
If you need to be able to remotely control the radio even when it has been put
into Standby, then you can choose to keep the network connected by using the
'Keep network connected' option in the network settings menu. In the Standby
mode display the WiFi signal indicator is shown with or without a cross through it,
or the Ethernet connection indicator is shown unplugged or plugged in, according
to the state of the connection.
Network wizard
PBC Wlan setup
View settings
Wlan region
Manual settings
NetRemote PIN Setup
Network settings
Wlan region
Manual settings
NetRemote PIN Setup
Network profile
Clear network settings
Keep network connected
Network settings
The UNDOK app logo.
19
Internet Radio
Internet Radio - the basics
Before you can use your radio to listen to broadcasts via the Internet, it is necessary to have
connected it to your computer network using either the wireless (WiFi) connection or the wired
Ethernet connection (RJ-45 socket) located on the back of the unit. Please see page 7 for details.
There are literally many thousands of radio broadcasts available via the Internet as well as
'Podcasts'. Your radio provides several ways of searching for broadcasts in order to make
fi nding and choosing them easier. Once you have found the radio stations that you like,
you may either store them as presets within the radio, or add them to a list of your favourite
stations which your radio can access. The radio allows you to store up to 40 presets and as
many favourites as you like.
You may search for an Internet radio station by Location. If you know the name of the station
and the country from which a station is broadcast this may be the easiest method to fi nd a
station. It is also a great way to experience radio from other parts of the world.
You may also search for an Internet radio station by Genre. If you prefer a particular type
of music, Blues for example, you may search for a radio station that broadcasts that type of
music, and you can choose from a list of Blues radio stations regardless of location, or taking
location into account.
If you know part of the name of an Internet radio station, you can enter it into the radio and
it will search for stations that match that name. This can be helpful if you are unsure of the
location or genre of a particular station.
The Stream 217 radio connects to a radio station database which serves many users in many
countries. This means that there is a very wide range of programme content available. You
can also search for stations which have been recently added to those available (new stations)
or you can search for the most popular.
Internet Radio
20
Selecting a radio station by location
1. Press the On/Standby button to switch the radio on. Then press the
Mode button to select the Internet Radio mode display.
2. Press the Menu button to enter the main Internet Radio menu. Rotate
the Tuning/Select control until 'Station list' is highlighted on the display
and then press the control to select the option.
3. Rotate the Tuning/Select control until 'Stations' is highlighted on the
display and the press the control to select.
Note that the menu may offer one or more local selections based upon
the country in which the unit is being used, according to your internet
IP address ('United Kingdom' and 'BBC' stations, for example).
4. Rotate the Tuning/Select control until 'Location' is highlighted on the
display and then press the control to select.
5. Rotate the Tuning/Select control to scroll through the list of continents.
When the desired continent is highlighted press the control to enter
your selection.
6. The display will show a list of countries within the chosen continent.
If there are many countries shown you can scroll through the list
continually in either direction. For example, if the chosen continent was
Europe, then to fi nd the United Kingdom scroll up from the top of the
list to the bottom by turning the Tuning/Select control anti-clockwise.
Press the Tuning/Select control to choose the desired country.
7. You will typically fi nd that you then have the option to select either 'All
Stations' or one of a number of categories. The lists are always sorted
alphabetically, and long lists will wrap around from top to bottom or
bottom to top.
Last listened
Station list
System settings
Main menu
Internet radio
My Favourites
Local United Kingdom
BBC
Stations
Podcasts
My Added Stations
Internet radio
Location
Genre
Search stations
Popular stations
New stations
Stations
Africa
Asia
Caribbean
Central America
Europe
Internet Only
Location
Sweden
Switzerland
Tur ke y
Ukraine
United Kingdom
Vati can
Europe
Asian sound radio
Aston FM
Atlantic FM
Audio Book Radio
BBC Radio 2
BBC Radio 3
All Stations
All stations
Highlighted stations
Alternative
Ambient
Big Band
Blues
United Kingdom
1
2
2-6
21
Selecting a radio station by location - cont.
8. Rotate the Tuning/Select control to highlight your chosen radio station
and then press the control to enter your selection. The display will
show 'Connecting...' while the radio connects to the new station. The
station should then start playing. Adjust the volume as needed.
9. If the station has on-demand content, that is, it gives the option of
listening to programmes which have already been broadcast or to
Podcasts, there will be an additional screen showing the radio station
name as well as a 'Podcasts' option.
These are selected using additional menus, determined by the radio
station and the content. There may simply be a list of programmes,
or there may also be options to chose from broadcasts on particular
dates or days of the week. The examples shown here are typical.
Podcasts can also be accessed separately from the main Internet
Radio menu, see page 25.
If your radio cannot connect to a radio station
Note: If your radio is unable to connect to an Internet radio station it will
generally either display 'Network Error' or 'Stopped'. This can be for many
reasons, but typically will be due to one of the following:
The radio station may not be broadcasting at the present time.
The radio station may not be able to accommodate any more connections
from internet listeners.
The broadcaster may limit listening to specifi c countries or regions
There may be network congestion (either locally or at a distance)
which is affecting the reliability of the connection.
If your radio can connect, but the audio is not continuous and the radio
keeps having to reconnect, this may be due to the radio station only having
limited connection capacity.
Please also refer to the 'Troubleshooting' section on page 93.
BBC Radio 2
Podcasts
BBC Radio 2
BBC Radio 2
Podcasts
BBC Radio 2
8
Arts, Drama, Readings
Breakfast show
Gardening tips
Rock show
Theatre news
Show time
Podcasts
28/01/2014 - January 28
27/01/2014 - January 27
26/01/2014 - January 26
26/01/2014 - January 25
Art, Drama, Readings
8,9
22
Internet Radio
Selecting a radio station by genre
1. Press the Menu button to enter the main Internet Radio menu. Rotate
the Tuning/Select control until 'Station list' is highlighted on the display
and then press the control to select.
2. Rotate the Tuning/Select control until 'Stations' is highlighted on the
display and then press the control to select.
3. Rotate the Tuning/Select control until 'Genre' is highlighted on the
display and then press the control to select.
4. Rotate the Tuning/Select control to scroll through the list of content
types. This menu is normally cyclic - you can scroll the list continually
in either direction. When the chosen genre is highlighted, press the
Tuning/Select control.
5. You then have the choice of 'All Stations' of the chosen genre, or a
list of countries. Note if a country is not shown then the station may
still appear in the 'All Stations' list. Rotate and then press the Tuning/
Select control to choose as needed.
6. A list of radio stations is then shown. Rotate the Tuning/Select control
until the desired station name is highlighted on the display.
7. Press the Tuning/Select control to select the station. The display will
show 'Connecting...' while it fi nds the new station. If the radio is unable
to connect this may be for one of the reasons explained on page 21.
8. Adjust the Volume control as needed to set the listening level.
Alternative
Ambient
Big Band
Bluegrass
Blues
Business news
Genre
All Stations
Highlighted Stations
Belgium
France
Germany
Greece
Blues
Asian sound radio
Aston FM
Atlantic FM
Audio Book Radio
BBC Radio 2
BBC Radio 3
All Stations
Location
Genre
Search stations
Popular stations
New stations
Stations
My Favourites
Local United Kingdom
BBC
Stations
Podcasts
My Added Stations
Internet radio
1
1-7
8
23
Searching for a radio station by name
There may be occasions when you know the name of a radio station but
you do not know the location or genre. This facility allows you to search
for the station using a part (or parts) of the radio station name.
1. Press the Menu button to enter the main Internet Radio menu. Rotate
the Tuning/Select control until 'Station list' is highlighted on the display
and then press the control to select.
2. Rotate the Tuning/Select control until 'Stations' is highlighted on the
display and then press the control to select.
3. Rotate the Tuning/Select control until 'Search stations' is highlighted
on the display and then press the control to select.
4. To enter the search word(s) rotate the Tuning/Select control to highlight
each character for the search in turn, and press the Tuning/Select
control to enter. If you make an error rotate the control or use the Info
button to access the delete character '
' on the screen and then
press the Tuning/Select control. Rotate the control or press Info
again to go back to the character selection. After the fi nal character
of the search has been entered, use the Info button and then the
Tuning/Select control to highlight the ' ' symbol on the screen and
then press the control to fi nish.
5. The radio will search for radio stations that match your search data.
If you include a space between two search items the radio will look
for station names which include both items. Thus a search for 'ROCK
100' could fi nd a station called '100 Classic Rock Hits' as well as a
station called '100.FM Rocks'
6. Rotate the Tuning/Select control to highlight the station that you wish
to listen to and press the control to confi rm your choice. The display
will show 'Connecting...' while it fi nds a new station.
Last listened
Station list
System settings
Main menu
Internet radio
Location
Genre
Search stations
Popular stations
New stations
Stations
Radio 10 - Top 100 Classic
Rock 100 DIZ|
Search stations
My Favourites
Local United Kingdom
BBC
Stations
Podcasts
My Added Stations
Internet radio
1
1-6
Stations
0 1 2 3 4 5 6
7 8 9
ROCK 100
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
24
Internet Radio
Selecting a new or popular station
As described in the section 'Internet Radio - the basics' on page 19, your
radio connects via the Internet to a database of radio stations. This option
is provided to highlight stations which are newly added to the list of those
available, or stations which are particularly popular with listeners around
the world. Your radio allows you to easily choose stations from these two
categories, using menus very similar to those used when fi nding stations
by location and genre.
1. Press the Menu button to enter the main Internet Radio menu. Rotate
the Tuning/Select control until 'Station list' is highlighted on the display
and then press the control to select.
2. Rotate the Tuning/Select control until 'Stations' is highlighted on the
display and then press the control to select.
3. Rotate the Tuning/Select control until 'Popular stations' or 'New
stations' is highlighted on the display. Press the Tuning/Select control
to enter your choice.
4. Rotate the Tuning/Select control to highlight the station that you wish
to listen to and then press the control to enter your choice. The display
will show 'Connecting...' while the new station is found.
If the radio is unable to connect to a particular radio station this may be
for one of the reasons explained on page 21.
Last listened
Station list
System settings
Main menu
Internet radio
Location
Genre
Search stations
Popular stations
New stations
Stations
BBC Radio 4
ENERGY ZURICH
All Irish Radio
Classic FM
RTL
BBC Radio 2
Popular stations
My Favourites
Local United Kingdom
BBC
Stations
Podcasts
My Added Stations
Internet radio
1
1-4
25
Selecting a podcast
Radio broadcasters and individuals may make programmes which are
intended normally to be downloaded into a computer or copied onto a
portable media player. These are commonly known as Podcasts.
Podcasts are also accessible using the Podcasts option on the Stations
menu (see page 20-21).
1. Press the Menu button to enter the main Internet Radio menu. Rotate
the Tuning/Select control until 'Station list' is highlighted on the display
and then press the control to select.
2. Rotate the Tuning/Select control until 'Podcasts' is highlighted on the
display and then press the control to select.
3. You may then search by location, genre, or using part of the name of
the podcast. The searches operate in exactly the same way as when
searching for a conventional radio station.
Searching by location is done fi rst by continent, then by country. You
may then list 'All shows' or search within a country by genre.
Searching by genre is more direct, since once the genre is chosen
the next menu display shows a list of available podcasts.
Searching by name operates in the same way as when searching
for a named radio station, selecting the '
' symbol when you have
entered the text. You may enter one or more pieces of text which will
be used for the search.
4. Rotate the Tuning/Select control and then press the control to confi rm
your chosen podcast. The display will show 'Connecting...' while it
fi nds the new programme.
Last listened
Station list
System settings
Main menu
Internet radio
My Favourites
Local United Kingdom
BBC
Stations
Podcasts
My Added Stations
Internet radio
Location
Genre
Search podcasts
Podcasts
Arts, Drama, Readings
Breakfast show
Gardening tips
Rock show
Theatre news
Show time
Podcasts
1
1-4
Podcasts
0 1 2 3 4 5 6
7 8 9
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
26
Internet Radio
Presetting stations
With so many Internet radio stations available, it is desirable to have a means of rapidly
selecting the stations that you listen to most frequently. Your radio has forty memory
presets for Internet radio which can easily be set to store the details of any Internet radio
station or podcast. The fi rst fi ve presets may generally be accessed using the memory
preset buttons 1 - 5, but these buttons are not available when listening to podcasts since
they have other functions. In that case the Preset menu should be used instead (see
next page). The radio station presets are retained even when the radio is switched off.
Please see also the sections 'Last Listened' on page 28 and 'Confi guring My Favourite
Stations' on page 32.
Storing a preset using the preset buttons 1-5
1. Press the On/Standby button to switch on your radio. Tune to the required station
using one of the methods described on the preceding pages.
2. To store the currently playing radio station as a preset, press and hold the required
Preset button (1 - 5) until the display shows 'Preset stored'. The station will be stored
using the chosen preset button. Repeat this procedure as needed for the remaining
presets.
3. Stations that are already stored in the presets may be over-written by following the
procedure described above.
Recalling a preset using preset buttons 1-5
1. Press the On/Standby button to switch on your radio. Select the Internet Radio
mode using the Mode button.
2. Momentarily press the required Preset button. Your radio will then connect to the
station stored in the preset memory. The preset used will be shown at the bottom
of the display screen.
1
2
1
2
Description
The best new
music and
entertainment
Internet radio
12:34
BBC Radio 2
2
2
27
1. [Not set]
2. BBC Radio 4
3. Atlantic FM
4. [Not set]
5. [Not set]
6. BBC Radio 4
Save to Preset
1. Classic FM
2. BBC Radio 4
3. Atlantic FM
4. RTL
5. BBC Radio 2
6. [Not set]
Recall from Preset
Storing a preset using the menu
1. Press the On/Standby button to switch on your radio. Tune to the
required station using one of the methods described on the preceding
pages.
2. Press and hold the Preset button. The display will show a 'Save to
Preset' menu.
3. Use the Tuning/Select control to scroll through the preset list until you
reach an unused preset or a preset that you wish to change. Press and
release the Tuning/Select control to store the preset. 'Preset stored'
will be shown on the display. Repeat this procedure as needed for the
remaining presets.
4. Stations which are already stored in the presets may be over-written
by following the procedure above.
Recalling a preset using the menu
1. Select the Internet radio mode using the Mode button.
2. Press and release the Preset button to display the 'Recall from Preset'
menu.
3. Use the Tuning/Select control to select the desired preset station.
Press and release the Tuning/Select control.
Your radio will then connect to the station stored in the preset memory.
The preset used will be shown at the bottom of the display screen.
2
Description
The best new
music and
entertainment
Internet radio
12:34
BBC Radio 2
5
2
3
2
3
1
Loading...