Roberts R9974 User Manual

Page 1
R9974
3 Band PLL Synthesised Portable
Mains Battery Radio
ROBERTS
Sound for Generations
Please read this manual before use
Page 2
Contents
Controls ........................................................................... 3-4
Battery operation .................................................................6
Using the AC adaptor ..........................................................6
Setting the clock ..................................................................7
Operating your radio ............................................................8
Scan tuning .........................................................................8
Manual tuning ......................................................................9
Search tuning ....................................................................10
Storing stations in preset memories ..................................11
Recalling preset stations ...................................................12
Setting the radio alarm ......................................................13
Setting the HWS buzzer alarm ..........................................14
Snooze function ................................................................ 15
Sleep function ....................................................................15
Tuning step size .................................................................16
Display backlight ...............................................................17
Headphone socket ............................................................17
Specifi cations ....................................................................18
Circuit features ..................................................................18
Guarantee .........................................................................19
2
Page 3
Controls
(Top)
1. On/Off button
2. LCD display
3. Band/Step button
4. Radio alarm button
5. Buzzer alarm button
6. Scan/Time set button
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
13 6
2
7. Volume control
8. Tuning up button
9. Tuning down button
10. Preset buttons
54
7
8
9
10
3
Page 4
Controls
11. Headphone socket
12. DC input socket
11
12
4
Page 5
b
cd fe
a
ghij
a. Waveband indicators
b. Frequency indicators
c. Sleep/Snooze indicators
d. PM indicator
e. Time set indicator
f. Time indicators
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
g. Buzzer alarm indicators
h. Radio alarm indicators
i. Battery indicator
j. Preset indicators
5
Page 6
Battery operation
1. Release the catch securing the rear door of your radio.
2. Insert four LR20 (D size) batteries into the spaces in the compartment. Take care to ensure all batteries are inserted with the correct polarity as shown inside the battery compartment. Close the rear door and secure the catch
3. Reduced power, distortion, and a ‘stuttering’ sound are all signs that the batteries may need replacing. The batteries should be replaced when the battery indicator fl ashes and "E" shows in the display.
4. If the radio is not to be used for any extended period of time it is recommended that the batteries are removed from the radio.
We would recommend for economy that the R9974 is used via the
AC adaptor whenever possible with battery operation for occasional or stand-by use only.
Using the AC adaptor
1. Insert the adaptor plug into the DC in socket on the left hand side of your radio.
2. Plug the adaptor into a standard 13A mains socket outlet. Whenever the adaptor is used the batteries are automatically disconnected.
The AC adaptor should be disconnected from the mains supply and
the radio when not in use. The unit is only fully isolated from the mains if the AC adaptor is removed from the wall socket.
6
Page 7
Setting the clock
1. The clock will start running when the batteries are installed or when the radio is connected to the mains supply. The display will show "-:--" together with the real time symbol .
2. The time can be set with your radio switched on or off.
3. Press and hold down the Time set button until the hours digits fl ash in the display.
4. Press the Tuning up/down buttons to set the required hour.
5. Press the Time set button, the minute digits will fl ash in the dis- play.
6. Press the Tuning up/down buttons to set the required minute.
7. Press the Time set button to complete time setting. The colon between the hour and minute digits will begin to fl ash.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
3
4
4
7
7
Page 8
Operating your radio
Your radio is equipped with four tuning methods:- Scan tuning, Manual tuning, Search tuning and Memory preset tuning.
Scan tuning
1. Press the On/Off button to switch on your radio.
2. Select the required waveband by repeatedly pressing the Band button. For the FM waveband fully extend the Telescopic aerial and set it at an angle of 45 degrees.
3. Press and release the Scan button to commence scan tuning.
4. The radio will scan the selected waveband and stop automatically when it fi nds a station of suffi cient strength. Press the Scan button to listen to the station.
Note: your radio will continue to search for the next available station
if you do not press the Scan button when it fi nds a radio station.
1
2
3
5. When the waveband end is reached the radio will continue tuning from the opposite waveband end.
6. Set the Volume control clockwise to the required level.
7. To switch off your radio press the On/Off button. The display will show
OFF.
8
4
6
7
Page 9
Manual tuning
1. Press the Power button to turn on the radio.
2. Select the required waveband by repeatedly pressing the Band button. For the FM waveband fully extend the Telescopic aerial and set it at an angle of 45 degrees.
3. A single press on either the Tuning up or Tuning down buttons will change the frequency in the following increments:-
FM 50 or 100kHz
MW 9 or 10 kHz
LW 3kHz
4. When the waveband end is reached the radio will continue tuning from the opposite waveband end.
5. Set the Volume control clockwise to the required level.
6. To switch off your radio press the On/Off button. The display will show
OFF.
12
4
4
5
6
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
9
Page 10
Search tuning
1. Press the Power button to turn on the radio.
2. Select the required waveband by repeatedly pressing the Band button. For the FM waveband fully extend the Telescopic aerial and set it at an angle of 45 degrees.
3. Press and hold down either the Tuning up or Tuning down buttons for more than 0.5 sec to commence scan tuning.
4. The radio will scan the selected waveband and stop automatically when it fi nds a station of suffi cient strength.
5. To recommence scan tuning, press and hold down either the Tuning up or Tuning down buttons for more the 0.5 sec.
6. When the waveband end is reached the radio will continue tuning from the opposite waveband end.
7. Set the Volume control clockwise to the required level.
8. To switch off your radio press the On/Off button. The display will show
OFF.
1
2
3
3
5
5
7
8
10
Page 11
Storing stations in preset memories
There are 5 memory presets for each waveband.
1. Press the Power button to turn on the radio.
2. Tune to the required station using one of the methods previously described.
3. Press and hold down the required preset until the radio beeps (greater than 2 seconds) The preset number will appear in the display and the station will be stored under the chosen preset button.
4. Repeat this procedure for the remaining presets.
5. Stations stored in preset memories may be overwritten by following the above procedure.
1
1
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
11
Page 12
Recalling preset stations
1. Press the Power button to turn on the radio.
2. Select the required waveband by repeatedly pressing the Band but­ton.
3. Momentarily press the required Preset button, the preset number and station frequency will appear in the display.
1
2
3
12
Page 13
Setting the radio alarm
When the radio alarm is selected the radio will turn on and play the station selected during the alarm set up. The radio alarm will sound for one hour unless turned off by pressing the Power button. Pressing the Power button whilst the alarm is sounding will cancel the alarm for 24 hours.
1. The radio alarm time can be set with the radio switched on or off.
2. Press and hold down the Radio Alarm button immediately press and hold down the Time set button until the hour digits and radio alarm symbol fl ash in the display.
3. Set the required hour using the Tuning up/down buttons.
4. Press the Time set button, the minute digits will fl ash in the dis- play.
2
2,4,7
5. Set the required minute using the Tuning up/down buttons.
6. Select the station you wish to wake up to using the Waveband and Tuning up/down buttons.
7. Press the Time set button to complete alarm setting.
8. To permanently cancel the alarm press and hold down the Radio Alarm button until the radio alarm symbol is removed from the display. The alarm may be re-activated to a previously set time by pressing and holding down the Radio Alarm button until the radio alarm symbol appears in the display.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
3,5,6
6
3,5,6
8
13
Page 14
Setting the HWS (Humane Wake System) buzzer alarm
A beep tone will sound when using the HWS alarm. The alarm beep will increase in volume every 15 seconds for one minute followed by one minutes silence before repeating the cycle. The HWS alarm will sound for one hour unless turned off by pressing the On/Off button. Pressing the On/Off button whilst the alarm is sounding will cancel the alarm for 24 hours.
1. The HWS buzzer alarm time can be set with the radio switched on or off.
2
2. Press and hold down the Buzzer Alarm button immediately press and hold down the Time set button until the hour digits and radio alarm symbol fl ash in the display.
3. Set the required hour using the Tuning up/down buttons.
4. Press the Time set button, the minute digits will fl ash in the dis- play.
5. Set the required minute using the Tuning up/down buttons.
6. Press the Time set button to complete alarm setting.
7. To permanently cancel the alarm press and hold down the Buzzer Alarm button until the radio alarm symbol is removed from the display. The alarm may be re-activated to a previously set time by pressing and holding down the Buzzer Alarm button until the buzzer alarm symbol appears in the display.
14
2,4,6
3,5
3,5
7
Page 15
Snooze function
1. Whilst the alarm is sounding pressing any button (except the Power button) will activate the snooze function. The Radio or Buzzer alarms will be silenced for 5 minutes.
2. The Display will fl ash both the snooze symbol and the alarm symbol . The snooze function can be repeated during the 1 hour that the alarms are active.
Sleep function
The sleep timer will automatically switch off your radio after a preset time has elapsed.
1. Press and continue to hold down the On/Off button the dis- play will cycle through the available sleep times in the order 60-45-30-15-120-90-60. Release the button when the required sleep time appears in the display. The symbol will appear in the display and the radio will play the last station selected.
2. To cancel the sleep function, press the On/Off button, the symbol will disappear and the radio will switch off.
1
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
15
Page 16
Tuning step size
In Europe and other parts of the world MW tuning steps are 9kHz, in America the MW tuning step size is 10kHz.
On FM tuning steps can be set to either 50 or 100kHz.
1. Ensure that your radio is switched off.
2
2. Press and hold down the Step/Band button for 2 sec. The display will show the current FM step size. Continue holding down the Step/Band button for 5 sec. Your radio will beep and the display will fl ash FM and 50kHz.
3. Press the Tuning Up button to change FM step size to 100kHz.
4. Press the Tuning Down button to change FM step size to 50kHz.
5. Press the Step/Band button to display the MW step size. The display will show MW and fl ash 9kHz.
6. Press the Tuning Up button to change MW step size to 10kHz.
7. Press the Tuning Down button to change MW step size to 9kHz
8. Complete the setting by pressing the Step/Band button.
16
3
4
5
6
7
8
Page 17
Display backlight
1. The display backlight will be switched on for approximately 15 seconds
when any button is pressed, during station scanning and when the
alarm is operating.
Headphone socket
1. A 3.5mm Headphone Socket located on the left hand side of your radio is provided for use with either headphones or an earpiece. Inserting a plug automatically mutes the internal loudspeaker.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
17
Page 18
General
Do not allow this radio to be exposed to water, steam or sand. Do not leave your radio where excessive heat could cause damage such as in a parked car where the heat from the sun can build up even though the outside temperature may not seem too high. It is recommended that the FM band be used wherever possible as better results in terms of quality and freedom from interference will usually be obtained than on the MW or LW bands.
Specifi cations
Power Requirements
Mains (via AC adaptor)
AC 230 volts, 50Hz only/DC 6V 400mA
Batteries 4 x LR20 (D size)
Battery Life
Approx. 170 hours of listening for 4 hours a day at normal volume using alkaline cells.
Frequency Coverage
FM 87.5-108MHz
MW 522-1629kHz
LW 153-279kHz
18
Circuit Features
Loudspeaker 75mm 4ohm full range
Output Power 800mW
Headphone socket 3.5mm dia
Aerial System FM Telescopic aerial
MW/LW Ferrite Rod
Page 19
Guarantee
This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below. Should any component or part fail during this guarantee period it will be repaired or replaced free of charge.
The guarantee does not cover:
1. Damage resulting from incorrect use.
2. Consequential damage.
3. Receivers with removed or defaced serial numbers.
N.B. Damaged or broken telescopic aerials will not be replaced under guarantee.
Procedure:
Any claim under this guarantee should be made through the dealer from whom the instrument was purchased. It is likely that your Roberts' dealer will be able to attend to any defect quickly and effi ciently, but should it be necessary the dealer will return the instrument to the company’s service department for attention. In the event that it is not possible to return the instrument to the Roberts' dealer from whom it was purchased, please contact Roberts Radio Technical Services at the address shown on the rear of this manual.
These statements do not affect the statutory rights of a consumer.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
19
Page 20
Issue 2
ROBERTS RADIO TECHNICAL SERVICES
97-99 Worton Road
Isleworth Middlesex
TW7 6EG
Technical Helpline :- 020 8758 0338 (Mon-Fri during offi ce hours)
Website: http://www.robertsradio.co.uk
Loading...