Supplied and Serviced by Roberts audio Solutions LTD
User guide - Juno
Inputs and Outputs - The main unit
1 = 3.5mm Jack stereo input for external audio, to
connect to other classroom devices such as a DVD
player etc
2 = Sound output with volume control to allow you to
connect a hearing impairment device
3 = Phono Stereo inputs for external audio, to connect
2
3
4
1
to other classroom devices such as a DVD player
etc
4 = Two serial ports for charging microphones
5 = Socket for power supply
6 = Power Switch
6
5
Tower Controls
Previous version model
Master volume control
Settings
Device volume control
Microphone volume control
Latest version model
Master Volume
Your Juno system has a master volume control that increases or
decreases the mixed volume of all devices and microphones.
From the home screen you can adjust or mute the master
volume of your Juno Tower.
You can control the individual volume of each device connected to
your Juno Tower. Devices that are currently playing audio will
appear in white text and have a green check mark in the far right
on the blue bar.
To Adjust the microphone volume. To control the volume of
each microphone press the volume icon and select the mic which
you want to change adjust (Display 1). The mic that is active
and un-muted will appear in white text and will have a green
checkmark in the far right of the blue bar. Adjust the volume of
the connected device using the up or down arrow (Display 2).
Display 1 Display 2
Prioryfield House, 20 Canon street, Taunton, Somerset, TA1 1SW |
www.robertsaudiosolutions.co.uk |info@robertsaudiosolutions.co.uk |
Page 1
Tel: 07910035358 | 01823323363
Supplied and Serviced by Roberts audio Solutions LTD
PRESS AND SLIDE UP = Power On
FF = Battery Charged
Audio Socket
User guide - Juno
1. Select the audio device for which you want to change the volume (Display 1).
Adjust the volume of the connected device using the up or down arrow (Display 2).
Display 1 Display 2
Teacher’s Microphone
5
Microphone element
1.
Mute Indicator light
2.
OFF/STANDBY = Un-muted
SOLID RED = Muted
Power Indicator
3.
SOLID GREEN = Power On
NO LIGHT = OFF / Standby
One-Touch Button
4.
PRESS MOMENTARILY =
Awaken
PRESS MOMENTARILY =
Mute / Un-mute
PRESS AND HOLD = Issue
Voice Command
Battery Indicator
5.
FLASHING RED = Battery Low
6. Charging Jack for
charging via USB
cable
7. 3.5mm audio input
jack. This allows you use
the Pendant Mic to
transmit audio from any
secondary audio source
such as a computer or
MP3 player.
Student’s Microphone
2
4
1.
Microphone element
2.
3 Power Indicator
SOLID GREEN = On
OFF = Power Off
3.
Power/Push-to-talk Switch
PRESS AND HOLD = Push-to-talk
4.
Battery Indicator, O
FLASHING RED = Battery Low
5.
Charging / Programming Jack For
charging via USB cable
6.
3.5mm audio input jack allowing you to
transmit audio from any secondary audio
source such as a computer or MP3 player.
3
5 6
Prioryfield House, 20 Canon Street, Taunton, Somerset, TA1 1SW |
www.robertsaudiosolutions.co.uk |info@robertsaudiosolutions.co.uk |
Tel: 07910035358 | 01823323363
Page 2
Loading...