How it Works
Robe
Loading...
F
H
I
L
O
P
R
S
U
W
X
Loading...
Loading...
Robin CycBar 15
User Manual
30 pgs2.88 Mb0

Robe Robin CycBar 15, Robin CycBar 15 Wireless DMX CRMX User Manual

Version 1.
7
Table of contents
1. Safety instructions ...................................................................................................................................................... 3
2. Fixture exterior view ................................................................................................................................................... 4
3. Installation .................................................................................................................................................................. 5
3.1 Rigging the fixture ................................................................................................................................................. 5
3.2 Connection to the mains ...................................................................................................................................... 6
3.3 DMX 512 connection ............................................................................................................................................ 6
3.4 Inserting diffuser ................................................................................................................................................... 8
4. Wireless DMX operation ............................................................................................................................................. 8
5. Control menu map ...................................................................................................................................................... 9
6. Control menu ............................................................................................................................................................ 12
6.1 Fixture Address ................................................................................................................................................... 12
6.2 Fixture information ............................................................................................................................................. 12
6.3 Personality .......................................................................................................................................................... 13
6.4 Manual mode ...................................................................................................................................................... 14
6. 5 Test sequences................................................................................................................................................... 15
6.6 Stand-alone setting ............................................................................................................................................. 15
6.7 Special functions ................................................................................................................................................. 16
7. Error and information messages .............................................................................................................................. 17
8. RDM .......................................................................................................................................................................... 18
9. Technical specifications ............................................................................................................................................ 19
10. Cleaning and maintenance ..................................................................................................................................... 23
10.1 Disposing of the product .................................................................................................................................. 23
2
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE POWERING OR INSTALLING YOUR Robin CycBar 15!
Save it for future reference.
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this manual.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the device.
Please consider that damages caused by manual modifications to the device are not subject to warranty.
This device is for professional use only. It is not for household use.
1. Safety instructions
DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT!
Make sure that the available voltage is not higher than stated on the rear side of the fixture. This fixture should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized distributor or local power company.
WARNING! The unit does not contain an ON/OFF switch. Always disconnect power input cable to completely remove power from unit when not in use or before cleaning or servicing the unit.
Do not overload wall outlets and extension cords as this can result in fire or electric shock.
Make sure that the power cord is never crimped or damaged by sharp edges. Check the fixture and the power cord from time to time.
Do not install the unit near naked flames.
Refer servicing to qualified service personnel.
This fixture falls under protection class I. Therefore this fixture has to be connected to a mains socket outlet with a protective earthing connection.
Do not connect this fixture to a dimmer pack.
Warning! Risk Group 2 LED product according to EN 62471.
LED light emission. Risk of eye injury. Do not look straight at the fixture´s LEDs during operation. The intense light beam may damage your eyes. The light source contains blue LEDs.
Keep combustible materials away from the fixture.
If the fixture has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
Avoid brute force when installing or operating the fixture.
3
1.
Unit body
This device is for professional use only. It is not for household use.
When choosing the installation spot, please make sure that the fixture is not exposed to extreme heat or dust.
Avoid using the unit in locations subject to possible impacts.
Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly fastened.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the fixture.
Do not block the front covering glass with any object when the fixture is under operation. The fixture body never must be covered with cloth or other materials.
Always fix the fixture with an appropriate safety cable. Fix the safety cable at the anchor point.
The fixture becomes very hot during operation. Allow the fixture to cool approximately 30 minutes prior to manipulate with it.
Operate the fixture only after having familiarized with its functions. Do not permit operation by persons not qualified for operating the fixture. Most damages are the result of unprofessional operation!
Do not attempt to dismantle or modify the unit.
Please consider that unauthorized modifications on the fixture are forbidden due to safety reasons!
Please use the original packaging if the fixture is to be transported.
If this device will be operated in any way different to the one described in this manual, the product may suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short­circuit, burns, electric shock etc.
2. Fixture exterior view
2. Side covers
3. Tilt locks
4. Anchor point for safety cable
5. Mounting brackets
6. Transparent cover
7. DMX IN
8. Control unit
9. LED display
10. DMX OUT
11. Power IN
12. Control buttons
13. Power OUT
4
3. Installation
3.1 Rigging the fixture
The Robin CycBar 15 can be rigged in any orientation on a truss without altering its operation characteristics. For overhead use, always install a safety cable that can hold at least 10 times the weight of the fixture. You must only use safety cable with screw-on carbine. Use the safety wire anchor point for safety cable attachment for this fixture.
Ensure that the structure (truss) to which you are attaching
the fixture is secure
Fixture may cause severe injuries when crashing down! If you have doubts concerning the safety of a possible installation, do not install the device and consult installation with an expert.
Truss installation
1. Bolt clamps (1) to the omega holders (2) with M12 bolt and lock nut through the hole in the omega holder.
2. Fasten the omega holders to the brackets of the CycBar 15 by inserting both ¼ turn quick locks (3) into the holes of the brackets and tighten fully clockwise.
3. Clamp the fixture on a truss (5) and tighten both rigging clamps.
4. Pull a safety wire (4) around the truss (5) and lock the screw-on carabine through attachment point (6) as shown on the picture below.
For overhead installation, the fixture must be always secured with a safety wire that can bear at least 10 times the weight of the fixture
1- Clamp 4- safety wire 2- Omega holder 5- truss 3- ¼ turn quick locks 6- attachment point
5
Core (Eu)
Core (US)
Connection
Plug
Terminal Marking
Brown
Black
Live L Light blue
White
Neutral
N
3.2 Connection to the mains
Fixtures must be installed by a qualified electrician in accordance with all national
and local electrical and construction codes and regulations.
If you install a cord cap on the power cable to allow connection to power outlets, install a grounding-type (earthed) plug, following the plug manufacturer’s instructions. The cores in the power cable are coloured according to the following table.
Yellow/Green Green Earth
This device falls under class one and must be grounded!
Design of the Robin CycBar 15 allows to connect several fixtures to AC mains power in one interconnected daisy chain using power input and throughput connectors. Needed daisy chain cords are stated in the chapter “Technical specifications “ The max. number of connected fixtures depends on the AC mains power voltage and fixture version: EU version (CE) US version (ETL) 15 fixtures at power supply= 230V 9 fixtures at power supply= 230V 13 fixtures at power supply= 208V 7 fixtures at power supply= 208V 7 fixtures at power supply= 120V 4 fixtures at power supply= 120V
Actual numbers of fixtures may differ from values stated above as you have to take into account the length of supply cables, circuit breaker etc. at projecting of the fixtures installation. Do not overload the supply line and the connecting leads. Wiring and connection work must be carried out by qualified staff!
, GND,PE
3.3 DMX 512 connection
The fixture is equipped with 5-pin XLR connectors for DMX input/output. Only use a shielded twisted-pair cable designed for RS-485 5-pin XLR- connectors in order to connect the controller with the fixture or one fixture with another.
Wiring of the XLR connectors: DMX input DMX output
XLR socket: XLR plug
To build a DMX chain
1. Connect the DMX output of the controller directly with the DMX input of the first fixture in the DMX chain.
2. Connect the DMX output of the first fixture in the DMX chain with the DMX input of the next fixture.
3. Always connect the DMX output with the input of the next fixture until all fixtures are connected.
1 – Shield 2 - Signal (-) 3 - Signal (+) 4 – Not connected 5 – Not connected
Do not overload the link. Max. 32 fixtures may be connected on a DMX link.
6
Caution: Terminate the link by installing a termination plug in the output of the last fixture. The termination plug is a 5-pin XLR male plug with a 120 Ohm resistor soldered between Signal (–) and Signal (+).
Warning for outdoor operation!
Fixture´s XLR connectors are dust and water protected according to IP 65 by mating with related X-HD cable connectors. They cannot stay disconnected outdoor. DMX output connector (XLR female) at the last fixture in a DMX line has to be covered with the rubber cap before inserting a terminator. The rubber cap does not supply the terminator. The XLR terminator (male) has to be dust and water protected.
If the fixture is to be outdoor without connecting to DMX line, always interconnect its DMX input with DMX output to keep declared IP rating of XLR connectors.
7
3.4 Inserting diffuser
Design of the Robin CycBar 15 allows inserting diffuser in front of the glass cover in order to change a beam angle of the fixture. Each diffuser consist of two parts. Always insert both parts of diffuser into fixture. Note. To keep declared ingress protection, do not disassemble side covers of the fixture!
To insert diffuser:
1. Disconnect the fixture from mains and allow it to cool.
2. Press and hold a diffuser lock (1) and insert the first part of the diffuser (2). Release the diffuser lock.
3. Press and the hold diffuser lock (1) on the opposite side of the Robin CycBar 15 and insert the second part of the diffuser (2). Release the diffuser lock.
4. Check that both diffusers are inserted properly and cannot slide out from the fixture.
4. Wireless DMX operation
The wireless version of the CycBar 15 is equipped with the Lumen Radio CRMX module and antenna for receiving DMX signal. CRMX module operates on the 2.4 GHz band.
1. Select option Wireless DMX input from the menu PErS (PErS-->dM.In.--> VirL.).
2. To link the fixture with DMX transmitter. The fixture can be only linked with the transmitter by running the link procedure at DMX transmitter . After linking , the level of DMX signal ( 0-100 %) is displayed in the menu item “SPEC“ (SPEC-->ViFi.)
3. To unlink the fixture from DMX transmitter. The fixture can be unlinked from receiver via the menu item “SPEC“ (SPEC-->ViFi-->UnLi.)
8
Menu Level 1
Menu Level 2
Menu Level
3
Menu Level 4
Menu
Level 5
Menu Level 6
A001
dM.Ad.
001-512 dM.Pr.
Mod 1
:
Mod
5
InFo Poti.
totL
rSEt VErS.
IC1.b.
:
ViFi tEMP.
Cur.t.
Hi.tE.
rSEt DM.In.
Func.
0-
255 : Din.F 0-255 PErS
dM.Pr.
Mod
1
Mod.2
:
Mod.
5 dM.In
VirE
VirL
VrLo
dISP.
d.On
On,
Off d.Int.
6…
100 turn
C.CL.n.
On, OFF
5. Control menu map
Default settings=Bold print
9
Loading...
+ 21 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use