Robe onePATT User Manual
Version 1.4
Table of contents
1. Safety instructions ......................................................................................................... 3
2. Description of the xture .............................................................................................. 4
3. Installation....................................................................................................................... 5
3.1 Mounting the onelPATT ............................................................................................. 5
3.2 Connecting the pixelPATT with the PATT Driver ........................................................ 5
4. Technical specications ................................................................................................ 7
2
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE INSTALLING THE PRODUCT .
1. Safety instructions
CAUTION!
The onePATT was designed for indoor use only.
The product is for professional use only, it is not for household use.
This product has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this manual.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this
manual or any unauthorized modication to the product.
If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on
immediately. The arising condensation water might damage your device. Leave the device switched o until
it has reached room temperature.
The onePATT should be operated with the PATT Driver only.
The onePATT becomes hot during its operation, a
llow it to cool prior
to manipulation.
The onePATT unit never must be covered with cloth or other materials during
operation.
Refer servicing to qualied service personnel.
Warning! Risk Group 2 LED product according to EN 62471
LED light emission. Risk of eye injury. Do not look into the beam at short distance of
the of the product. Do not view the light output with optical instruments or any
device that may conncentrate the beam.
The light source contains blue LEDs.
When choosing the installation spot, please make sure that the onePATT are not exposed to extreme heat,
moisture or dust.
Operate the onePATT only after having familiarized with its functions. Do not permit operation by persons not
qualied for operating the onePATT. Most damages are the result of unprofessional operation!
Please use the original packaging if the onePATT is to be transported.
Please consider that unauthorized modications on the xture are forbidden due to safety reasons!
3
Loading...