Robe LightDome 575, LightDome 1200 User Manual

version 1.7

LightDome 575

LightDome 1200

Table of contents

1. Introduction .....................................................................................................................3

2. Safety instructions .........................................................................................................3

3. Operating determinations .............................................................................................. 3

4.The LightDome - description .......................................................................................... 4

5. Installing and operating ................................................................................................. 4

5.1 AC power ...................................................................................................................4

5.2 Placing the LightDome on a plain surface .................................................................. 4

5.3 Truss mounting ..........................................................................................................5

5.4 Inating the LightDome .............................................................................................6

5.5 Deating the LightDome ............................................................................................6

6.Cleaning and maintenance ............................................................................................. 7

7.Technical Specications................................................................................................. 8

2

1. Introduction

Thank you for having chosen a LightDome.You acquired a versatile,light weight and inatable trasparent housing
for protection of moving head against weather inuances in temporary outdoor applications.
The LightDome 575 was designed to be operated with moving heads of ROBE 575/250 AT series.
The LightDome 1200 was designed to be operated with moving heads of ROBE 1200/700 AT series .

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE YOU INITIAL START - UP!

2. Safety instructions

Every person involved with installation and maintenance of this product has to:

- be qualied

- follow the instructions of the manual

CAUTION!

Use only the luminaire enables remote on/off the lamp.

This product has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning

notes written in this manual.

Important:

The manufacturer will not accept liability for any resulting damages caused by the non-observance of this
manual or any unauthorized modication to the product.

Always ground the unit electrically.

The electric connection, repairs and servicing must be carried out by a qualied employee.

Do not cover the transparent envelope.

Do not block the air vents.

Do not sit or lean on the unit.
Do not use this device in very dusty area.

Do not operate this unit in big winds.
Use a source of AC power that complies with local building and electrical rules.AC power has to have both

overload and short circuit protection

3. Operating determinations

This product was designed for protection of moving heads against weather inuences in temporary outdoor

applications.

Avoid brute force when installing or operating the unit.

When choosing the installation-spot, please make sure that the unit is not exposed to extreme heat or dust.
Only operate the unit after having checked that the housing is rmly closed and all screws are tightly fas­tened.

The maximum ambient temperature 30° C must never be exceeded.
Operate the unit only after having familiarized with its functions. Do not permit operation by persons not quali­ed for operating the unit. Most damages are the result of unprofessional operation!
Please use the original packaging if the product is to be transported.
Please consider that unauthorized modications on the unit are forbidden due to safety reasons.
Store the fold plastic dome at least 1 hour at room temperature before rst installing it on the base.

Before rst operation of the LightDome connect it to the mains (without plastic dome) for 5 hours to

recharge inbuilt accumulator.

To ensure long lifetime of the accumulator, the LightDome has to be in operation once in 6 months (
at minimum) for 5 hours.

Never store the LightDome with exhausted accumulator (after back-up operation). Let it recharge!

3