Version: 1.0
®
Show Lighting s.r.o. Czech Republic www.robe.cz
Show Lighting s.r.o. Czech Republic www.robe.cz
Table of contents
2. Cautions
4
Thank you for choosing an ROBE Haze 400 FT. You now own a rugged and powerful state-of-the-art machine.
this user manual, you can look forward to the reliable and satisfactory performance of your ROBE Haze 400
the unit is installed at the rated voltage.
Always unplug your Haze 400 FT before lling its tank.
Turn off or unplug when not in use.
This machine is not water- or splash-proof. If moisture, water, or hazer liquid gets inside the housing, imme-
tended.
Always make sure there is suf cient liquid in the hazer liquid tank. Operating this unit without liquid may cause
transportation. In the event that the unit’s housing or cable is damaged, do not plug it in and do not attempt
to use it until after contacting your ROBE distributor for assistance.
Your hazer may be operated with or without a remote controller. If you will be controlling your unit remotely,
rmly attach the remote control cable to the proper input.
To operate without remote control, simply turn hazer on. Haze emission will begin automatically.
To operate via remote control, press the appropriate button on the remote to begin haze emission.
to have more than a 15 degree angle of inclination.
Always monitor tank liquid level during operation.
this unit.
VAL control knob. Adjust the duration of each haze emission (within the range of 1 to 90 seconds) by means
The Haze 400 FT has onboard DMX control. Currently, it uses 1 channel to control output operation. The DMX
channel is set on the back panel of the Haze 400 FT by setting the dip switches to the desired channel:
the hazer’s liquid tank immediately after lling.
Voltage: ............................. AC 230 V, 50 Hz
Tank capacity:
2,5 Liter
2.500 Cu.ft/Min.
Weight:
Loading...