
2
Table of contents
1. Safety instructions ....................................................................................3
1. Description.................................................................................................3
2. Installation..................................................................................................4
3. Technical specications............................................................................6

3
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOU INSTALL THE PRODUCT .
1. Safety instructions
CAUTION!
This product was designed for indoor use only.
This device is for professional use only. It is not for household use.
This product has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this manual.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this
manual or any unauthorized modication to the product.
If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on
immediately. The arising condensation water might damage your device. Leave the device switched off until
it has reached room temperature.
The product never must be covered with cloth or other materials during operation.
1. Description
The HALO RGB (W) is a LED ring mountable on a stage reector PAR 64.
The HALO Driver is a control unit for the Halo RGB (W). Up to 6 HALO RGB (W) units can be connected to
the HALO Driver.
1 - LED ring
2 - Control input
3 - Power OUT
4 - DMX IN
5 - LED port 1
6 - LED port 3
7 - LED port 5
8 - Clamp
9 - Safety attachment eyelet
10- Power IN
11- Fuse holder
12- DMX OUT
13- LED port 2
14- LED port 4
15- LED port 6
16- Dip switch
17 -Signal LED

4
2. Installation
Design of the HALO Driver allows to connect several xtures to AC mains power in one interconnected daisy
chain using power input and throughput connectors.The max. number of connected xtures depends on the
AC mains power voltage and xture version:
EU version (CE) US version (cETLus)
10 xtures at power supply= 230V 6 xtures at power supply= 230V
9 xtures at power supply= 208V 5 xtures at power supply= 208V
5 xtures at power supply= 120V 3 xtures at power supply= 120V
Actual numbers of xtures may differ from values stated above as you have to take into account the length of
supply cables, circuit breaker etc. at projecting of the xtures installation Do not overload the supply line and
the connecting leads.
Wiring and connection work must be carried out by qualied staff!
The Halo Driver is equipped with the clamp for rigging on a truss. �or securing the HALO Driver to the truss,�or securing the HALO Driver to the truss,
install a safety wire that can hold at least 10 times the weight of the xture. Use only the safety wire with a snap
hook with screw lock gate. �asten the snap hook in the safety attachment eyelet and the safety wire around
the truss.

5
DMX start address setting
The DMX start address, is the rst channel used to receive instructions from the DMX controller. The address
may be any channel from 1 to 510 and is set on the Address DIP switch.
Examples
Control mode setting
The last three DIP switches dene control modes.
DIPs
Control Mode 10 11 12 Function
24 CH Intelli�lex Mode OFF OFF OFF Uses 24 Channel Personality to control each Halo Ring.
Uses Start Address for rst port as dened by DIP's19.
Each subsequent port is 24 channelsLater.
3 CH Strobe Mode ON OFF OFF Uses 3 Channel Strobe Personality to control each Halo
Ring.
Uses Start Address for rst port as dened by DIP's
19. Each subsequent port is 3 channels Later .
3 CH RGB Mode ON ON OFF Uses 3 Channel RGB Personality to control each Halo
Ring.
Uses Start Address for rst port as dened by DIP's
19. Each subsequent port is 3 channels Later .
Direct Mapping Mode OFF ON OFF Pixel Map each Halo Ring using 72 Channels.
Uses Start Address for rst port as dened by DIP's
19. Each subsequent port is 72 channels Later .
Intelli-Mappping Mode X X ON All 6 ports use the same 24 Channel Personality.
When Pixel Mapping Engine is active,it will work in a simi-
lar way to the direct mapping map, but will start the map
25 channels later that the start address (72 Channels per
Port).
X = position ignored
ALWAYS DISCONNECT THE HALO DRIVER FROM MAINS BEFORE SETTING THE DIP SWITCHES.

6
3. Technical specications
HALO RGB
Input voltage: 5V
Max. power consumption : 48W
Light source: 96 x RGB LEDs
Number of pixels: 24 (4 LEDs per pixel)
Control input: 4-pin XLR (male)
Ingress protection: IP 2X
Weight: 0.8 kg
Dimensions (mm):

7
August 31, 2016
All Specications subject to change without notice
HALO Driver
Input voltage range: 100-240V, 50-60Hz
Max. power consumption : 330W@230V
�use: T 4A/250V ~
Mains input: 16A max. (CE ), 10A max. (cETLus)
Mains output: 15A max. (CE ), 9A max. (cETLus)
Control modes: 24 CH Intelli�lex mode (24 channels per port)
3 CH Strobe mode (3 channels per port)
3 CH RGB mode (3 channels per port)
Direct Mapping mode (72 channels per port)
Intelli-Mapping mode (96 channels per port)
LED ports: 6 (4-pin XLR -female)
DMX IN/OUT: 5-pin XLR (male/female)
Power IN: Neutrik NAC3MPX
Power OUT: Neutrik NAC3�PX
Ingress protection: IP2x
Weight: 3.8 kg
Dimensions:
Optional Accessories
(P/N 13051800) Connecting cable Halo 10m (4-pin XLR)
(P/N 1305 2439) Daisy Chain PowerCon TRUE1 In/Out, EU, 2m, indoor
(P/N 1305 2440) Daisy Chain PowerCon TRUE1 In/Out, US, 2m, indoor
(P/N 13052444) Daisy Chain PowerCon TRUE1 In/Out, EU, 5m, indoor
(P/N 1305 2405) Mains Cable PowerCon In TRUE1/Schuko, 2m, indoor
(P/N 1305 2406) Mains Cable PowerCon In TRUE1/US, 2m, indoor
(P/N 1305 2407) Mains Cable PowerCon In TRUE1/open ended, 2m, indoor
(P/N 13052443) Mains Cable PowerCon In TRUE1/Hubb 2321, 2m US, indoor
(P/N 13052445) Mains Cable PowerCon In TRUE1/CEE 16A, 2m, indoor
Safety wire
Installation wire

HALO Driver - DMX protocol, version 1.0
0 - 255 Intensity 0% -> 100%
proportional
Red 1 - Background or 2nd FX colour
0 - 255 Colour saturation control 0 ->100%
proportional
Green 1 - Background or 2nd FX colour
0 - 255 Colour saturation control 0 ->100%
proportional
Blue 1 - Background or 2nd FX colour
0 - 255 Colour saturation control 0 ->100%
proportional
0 - 255 Colour saturation control 0 ->100%
proportional
0 - 255 Colour saturation control 0 ->100%
proportional
0 - 255 Colour saturation control 0 ->100%
proportional
0 Off
step
1-126 Forwards Rotation (fast -> slow )
proportional
127 Pause rotate
step
128-255 Backwards Rotation (slow -> fast )
proportional
0 Full
step
1-63 x 2
step
64-127 x 4
step
128-195 x 8
step
196-254 x 16
step
255 x 32
step
0 - 255
Offsets start point of rotating effects over each port proportional
0 - 255 Intensity 0% -> 100%
proportional
Red 1 - Background or 2nd FX colour
0 - 255 Colour saturation control 0 ->100%
proportional
Green 1 - Background or 2nd FX colour
0 - 255 Colour saturation control 0 ->100%
proportional
Blue 1 - Background or 2nd FX colour
0 - 255 Colour saturation control 0 ->100%
proportional
24 CH IntelliFlex Mode
Type of
control
Layer 1
Port/Channel
Layer 2

0 - 255 Colour saturation control 0 ->100%
proportional
0 - 255 Colour saturation control 0 ->100%
proportional
0 - 255 Colour saturation control 0 ->100%
proportional
0 Off
step
1-126 Forwards Rotation (fast -> slow )
proportional
127 Pause rotate
step
128-255 Backwards Rotation (slow -> fast)
proportional
0 Full
step
1-63 x 2
step
64-127 x 4
step
128-195 x 8
step
196-254 x 16
step
255 x 32
step
0-63 Forwards
step
64-127 Reverse
step
128-191 Mirror Out
step
192-255 Mirror In
step
0 - 255
Offsets start point of rotating effects over each port proportional
8/20 32/44 56/68 80/92 104/116 128/140
One colour Paparazzi-Snap
1 Example Effect
step
2 Slow- low density
step
3 Slow - medium density
step
4 Slow - high density
step
5 Slow - linear
step
6 Medium - low density
step
7 Medium - medium density
step
8 Medium - high density
step
9 Medium - linear
step
10 Fast - low density
step
11 Fast- medium density
step
12 Fast - high density
step
13 Fast - linear
step
One colour Paparazzi-Fade
14 Example Effect
step
Port/Channel
Type of
control

15 Slow- low density
step
16 Slow - medium density
step
17 Slow - high density
step
18 Slow - linear
step
19 Medium - low density
step
20 Medium - medium density
step
21 Medium - high density
step
22 Medium - linear
step
23 Fast - low density
step
24 Fast- medium density
step
25 Fast - high density
step
26 Fast - linear
step
Two colour Paparazzi-Snap
27 Example Effect
step
28 Slow- low density
step
29 Slow - medium density
step
30 Slow - high density
step
31 Slow - linear
step
32 Medium - low density
step
33 Medium - medium density
step
34 Medium - high density
step
35 Medium - linear
step
36 Fast - low density
step
37 Fast- medium density
step
38 Fast - high density
step
39 Fast - linear
step
Two colour Paparazzi-Fade
40 Example Effect
step
41 Slow- low density
step
42 Slow - medium density
step
43 Slow - high density
step
44 Slow - linear
step
45 Medium - low density
step
46 Medium - medium density
step
47 Medium - high density
step
48 Medium - linear
step
49 Fast - low density
step
50 Fast- medium density
step
51 Fast - high density
step
52 Fast - linear
step
53 Example Effect
step
54 Slow - short tail
step
55 Slow - medium tail
step
56 Slow- long tail
step
57 Medium -short tail
step
58 Medium - medium tail
step
59 Medium - long tail
step

60 Fast - short tail
step
61 Fast - medium tail
step
62 Fast - long tail
step
Trace 2-Uniform Decay (colour mix with base)
63 Example Effect
step
64 Slow - short tail
step
65 Slow - medium tail
step
66 Slow- long tail
step
67 Medium -short tail
step
68 Medium - medium tail
step
69 Medium - long tail
step
70 Fast - short tail
step
71 Fast - medium tail
step
72 Fast - long tail
step
73 Example Effect
step
74 Slow - short tail
step
75 Slow - medium tail
step
76 Slow- long tail
step
77 Medium -short tail
step
78 Medium - medium tail
step
79 Medium - long tail
step
80 Fast - short tail
step
81 Fast - medium tail
step
82 Fast - long tail
step
Trace 4-Uniform Colour (colour mix with base)
83 Example Effect
step
84 Slow - short tail
step
85 Slow - medium tail
step
86 Slow- long tail
step
87 Medium -short tail
step
88 Medium - medium tail
step
89 Medium - long tail
step
90 Fast - short tail
step
91 Fast - medium tail
step
92 Fast - long tail
step
93 Example Effect
step
94 Smallest
step
95 ..
step
96 ..
step
97 ..
step
98 ..
step
99 ..
step
100 ..
step
101 ..
step
102 Biggest
step

HALO Driver - DMX protocol, version 1.0
147101316Strobe Intensity
0 - 255 Intensity 0% -> 100%
proportional
0 - 255 Flash rate per second
proportional
0 - 255 Duration of flash
proportional
0 - 255 Colour saturation control 0 ->100%
proportional
0 - 255 Colour saturation control 0 ->100%
proportional
0 - 255 Colour saturation control 0 ->100%
proportional
3 CH RGB Mode
Port/Channel
Type of
control
3 CH Strobe Mode
Port/Channel
Type of
control

HALO Driver - DMX protocol, version 1.0
0 - 255 Colour saturation control 0 ->100%
proportional
0 - 255 Colour saturation control 0 ->100%
proportional
0 - 255 Colour saturation control 0 ->100%
proportional
0 - 255 Colour saturation control 0 ->100%
proportional
0 - 255 Colour saturation control 0 ->100%
proportional
0 - 255 Colour saturation control 0 ->100%
proportional
0 - 255 Colour saturation control 0 ->100%
proportional
0 - 255 Colour saturation control 0 ->100%
proportional
0 - 255 Colour saturation control 0 ->100%
proportional
Direct Mapping Mode
Port/Channel
Type of
control

HALO Driver - DMX protocol, version 1.0
0 - 255 Intensity 0% -> 100%
proportional
222222Red 1 - Background or 2nd FX colour
0 - 255 Colour saturation control 0 ->100%
proportional
333333Green 1 - Background or 2nd FX colour
0 - 255 Colour saturation control 0 ->100%
proportional
444444Blue 1 - Background or 2nd FX colour
0 - 255 Colour saturation control 0 ->100%
proportional
555555Red 2 - Main FX colour
0 - 255 Colour saturation control 0 ->100%
proportional
666666Green 2 - Main FX colour
0 - 255 Colour saturation control 0 ->100%
proportional
777777Blue 2 - Main FX colour
0 - 255 Colour saturation control 0 ->100%
proportional
1-126 Off
step
127 Forwards Rotation (fast -> slow)
proportional
128-255 Pause rotate
step
129-255 Backwards Rotation (slow -> fast)
proportional
0 Full
step
1-63 x 2
step
64-127 x 4
step
128-195 x 8
step
196-254 x 16
step
255 x 32
step
0-63 Forwards
step
64-127 Reverse
step
128-191 Mirror Out
step
192-255 Mirror In
step
121212121212Rotate offset
0 - 255
Offsets start point of rotating effects over each port proportional
0 - 255 Intensity 0% -> 100%
proportional
141414141414Red 1 - Background or 2nd FX colour
0 - 255 Colour saturation control 0 ->100%
proportional
151515151515Green 1 - Background or 2nd FX colour
0 - 255 Colour saturation control 0 ->100%
proportional
161616161616Blue 1 - Background or 2nd FX colour
0 - 255 Colour saturation control 0 ->100%
proportional
171717171717Red 2 - Main FX colour
Intelli-Mapping Mode
Port/Channel
Type of
control
Layer 1
Layer 2

0 - 255 Colour saturation control 0 ->100%
proportional
181818181818Green 2 - Main FX colour
0 - 255 Colour saturation control 0 ->100%
proportional
191919191919Blue 2 - Main FX colour
0 - 255 Colour saturation control 0 ->100%
proportional
0 Off
step
1-126 Forwards Rotation (fast -> slow)
proportional
127 Pause rotate
step
128-255 Backwards Rotation (slow -> fast)
proportional
0 Full
step
1-63 x 2
step
64-127 x 4
step
128-195 x 8
step
196-254 x 16
step
255 x 32
step
0-63 Forwards
step
64-127 Reverse
step
128-191 Mirror Out
step
192-255 Mirror In
step
242424242424Rotate offset
0 - 255
Offsets start point of rotating effects over each port proportional
0 - 255 Colour saturation control 0 ->100%
proportional
0 - 255 Colour saturation control 0 ->100%
proportional
272727272727Green pixel 1
0 - 255 Colour saturation control 0 ->100%
proportional
0 - 255 Colour saturation control 0 ->100%
proportional
959595959595Blue pixel 24
0 - 255 Colour saturation control 0 ->100%
proportional
969696969696Green pixel 24
0 - 255 Colour saturation control 0 ->100%
proportional
8/20 8/20 8/20 8/20 8/20 8/20
One colour Paparazzi-Snap
1 Example Effect
step
Port/Channel
Type of
control

2 Slow- low density
step
3 Slow - medium density
step
4 Slow - high density
step
5 Slow - linear
step
6 Medium - low density
step
7 Medium - medium density
step
8 Medium - high density
step
9 Medium - linear
step
10 Fast - low density
step
11 Fast- medium density
step
12 Fast - high density
step
13 Fast - linear
step
One colour Paparazzi-Fade
14 Example Effect
step
15 Slow- low density
step
16 Slow - medium density
step
17 Slow - high density
step
18 Slow - linear
step
19 Medium - low density
step
20 Medium - medium density
step
21 Medium - high density
step
22 Medium - linear
step
23 Fast - low density
step
24 Fast- medium density
step
25 Fast - high density
step
26 Fast - linear
step
Two colour Paparazzi-Snap
27 Example Effect
step
28 Slow- low density
step
29 Slow - medium density
step
30 Slow - high density
step
31 Slow - linear
step
32 Medium - low density
step
33 Medium - medium density
step
34 Medium - high density
step
35 Medium - linear
step
36 Fast - low density
step
37 Fast- medium density
step
38 Fast - high density
step
39 Fast - linear
step
Two colour Paparazzi-Fade
40 Example Effect
step
41 Slow- low density
step
42 Slow - medium density
step
43 Slow - high density
step
44 Slow - linear
step
45 Medium - low density
step
46 Medium - medium density
step

47 Medium - high density
step
48 Medium - linear
step
49 Fast - low density
step
50 Fast- medium density
step
51 Fast - high density
step
52 Fast - linear
step
53 Example Effect
step
54 Slow - short tail
step
55 Slow - medium tail
step
56 Slow- long tail
step
57 Medium -short tail
step
58 Medium - medium tail
step
59 Medium - long tail
step
60 Fast - short tail
step
61 Fast - medium tail
step
62 Fast - long tail
step
Trace 2-Uniform Decay (colour mix with base)
63 Example Effect
step
64 Slow - short tail
step
65 Slow - medium tail
step
66 Slow- long tail
step
67 Medium -short tail
step
68 Medium - medium tail
step
69 Medium - long tail
step
70 Fast - short tail
step
71 Fast - medium tail
step
72 Fast - long tail
step
73 Example Effect
step
74 Slow - short tail
step
75 Slow - medium tail
step
76 Slow- long tail
step
77 Medium -short tail
step
78 Medium - medium tail
step
79 Medium - long tail
step
80 Fast - short tail
step
81 Fast - medium tail
step
82 Fast - long tail
step
Trace 4-Uniform Colour (colour mix with base)
83 Example Effect
step
84 Slow - short tail
step
85 Slow - medium tail
step
86 Slow- long tail
step
87 Medium -short tail
step
88 Medium - medium tail
step
89 Medium - long tail
step
90 Fast - short tail
step