JPEG
MD11RT
Notes: Any changes to the design and specifications are not recommended.Notes: Any changes to the design and specifications are not recommended.
Before operating this product please read all the operating and connection instructions in this manualBefore operating this product please read all the operating and connection instructions in this manual
TABLE OF CONTENTS TABLE OF CONTENTS
TECHNICAL SPECIFICATIONSTECHNICAL SPECIFICATIONS
IMPORTANT SAFETY INSTRUCTIONIMPORTANT SAFETY INSTRUCTION
PREPARATION BEFORE USING THE Multimedia PREPARATION BEFORE USING THE Multimedia
Unpacking and checking the contents
CONTROL REFERENCE GUIDECONTROL REFERENCE GUIDE
The Multimedia play
The 11 inch TFT color LCD Monitor
The IR Remote Control
CONNECTIONCONNECTION
BASIC OPERATIONSBASIC OPERATIONS
PAL-NTSC Selection
Disc loading
Pause / Stop / Play
Select menu items
ADVANCED OPERATION ADVANCED OPERATION
Select a specific on-disc Menu section
Audio CD discs, track selection
Fast Forward
Fast Backward
Skip to the next chapter or track
Skip to the previous chapter or track
Select a track
Display the track list
Repeat
Select Subtitle Language
On Screen Display (OSD)
For DVD discs
For CD discs
FM Frequency
ZOOM
Memory Play
Slow Play
TV mode
SYSTEM SETTINGSSYSTEM SETTINGS
MP3/MPEG4 PLAYBACKMP3/MPEG4 PLAYBACK
Play mode
Other functions
INSTALLA TIONINSTALLA TION
COMPATIBLE DISK TYPESCOMPATIBLE DISK TYPES
TECHNICAL SPECIFICATIONSTECHNICAL SPECIFICATIONS
10
10
10
10
11
11
11
12
12
12
13
21
21
22
23
24
25
1
2
2
3
3
4
5
6
7
7
8
Specifications:
- Ultra Slim Design.
- Multimedia player Supports: DVD, DVD-R, DVD-RW, DVD+R, DVD+RW, CD, CD-R, CD-RW,
VCD, SVCD, MP3 and JPG picture disks
- MPEG4 support: DivX 3.11 / 4.02 / 5.02 / 5.03 / 5.05 / DivX Pro / XviD /Subtitles .srt .sub
- Electronic Shock Protection (ESP) and Mechanical Shock Protection
- USB,SD card host
-
AV Input via RCA connectors
- PAL/NTSC selection
-
Infra-red remote control
- Multi Lingual On Screen Display (OSD)
-
2 Integrated dome lights with door sensor connections
-
Multi-Language menu selection
- Dimension: 355 x 254 x 65mm (W/H/D)
8
8
8
8
9
9
9
9
Including
- Multimedia Player x1
- AV cables x1
- IR Remote control Including batteries x1
- User Manual x1
9
9
9
Specifications MultiMedia Player:
Power Consumption
FM Stereo Transmitter
High Carrier Frequency
Weight
Dimension
TV Signal system
Laser
Frequency range
S/N
Audio dynamic range
Harmonic Distortion
Input Sensitivity
12V DC(11-15V)/ 1.4A(Max.1.6A)
87.7MHz/88.4MHz/88.6MHz/89.4MHz/90.5MHz/91.5MHz
2.3/2.8MHz
3KG
355 x 254 x 65mm (W/H/D)
PAL/NTSC/MULTI
Semi-conductor laser, wave length 650nm, 780nm
48KHz pulse modulation 20Hz~22KHz
96KHz pulse modulation 20Hz~22KHz
65dB
>85dB
0,01%
500mv
Operation temperature 0~ 40
Storage Temperature
-15 ~ 50
Page 25 of 25 pages
COMPATIBLE DISK TYPESCOMPATIBLE DISK TYPES
Some DVD discs may have special requirements for playing, with which this system may
not be compatible. Please refer to the specifications on the individual disc.
DISC
TYPE
Content
Size
Total Play time
About 4.7 GB - 2hrs.
(Single side & single layer)
DVD
AUDIO/
VIDEO
12CM
About 8.5 GB - 4hrs.
(Single side & double layer)
About 9.4 GB - 4hrs.
(Double side & Single layer)
About 17GB - 8hrs.
(Double side & double layer)
CD-DA
MP3
AUDIO
MP3 AUDIO 12CM
12CM
About 700MB - 74 minutes
About 700MB - 300 minutes
Discs types
The Multimedia player can play the following types of discs: DVD / CD / CD-R /
CD-RW / DVD-R / DVD-RW / DVD+R / DVD+RW. Discs other than listed above cannot
be played. Please do NOT play discs smaller than 12CM or of odd shapes, only play
sound 12CM discs.
The Multimedia player uses the NTSC/PAL color systems. It cannot play discs
recorded with other systems, such as SECAM.
Region code
The region code for this player is 0 which indicate any region.
Dear Customer
We thank you for purchasing the Multimedia . We wish you many pleasant hours of
watching DVD's or listening to your favorite music. Personal Safety has been taken in
consideration in the design and manufacturing this product, however any improper use
or operation may result in an electrical shock, fire and/or any other hazards. To prevent
these hazards it is strongly recommended to read this manual thoroughly and adhere to
the following precautions:
Important Safety Instructions Important Safety Instructions
CAUTIONCAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION:
The unit employs a laser system.
To ensure proper use of this product.
Please read this owner s manual
carefully and retain for future reference.
Should the require maintenance, contact
an authorized service location-see service procedure.
Use of controls, adjustments or the
performance of procedures other than
those specified herein may result in
hazardous radiation exposure.
To prevent direct exposure to laser beam,
do not try to open the enclosure. Visible
laser radiation may be present when the
enclosure is opened. Do not stare into
beam.
Copyright
According to the related laws, DVD discs, without proper authorization, are not allowed
to be copied, broadcasted, cable broadcasted, or played publicly with the Multimedia
player .
The Multimedia player incorporates copyright protection technology that is
protected by method of claims of certain U.S. patents and other intellectual Property
Rights owned by their rights owners. Reverse engineering or disassembly is prohibited.
Page 24 of 25 pages
WARNING:
FCC regulations state that any change or modification to the equipment, not expressly
approved by maker or its authorized parties, could void user's authority to operate
this equipment.
NOTE
- Please dispose empty batteries according the regulations in your country
- All On Screen Displays (OSD) and Pictures will be based on the English version.
- Design and Specifications may vary in the manual from the actual product in use.
Page 1 of 25 pages
PREPARATION BEFORE USING THE MULTIMEDIA PLAYERPREPARATION BEFORE USING THE MULTIMEDIA PLAYER
Unpacking and checking the contents
please check if the following items and accessories are included in the received package:
INSTALLATIONINSTALLATION
MENU UP
SOURCE DOWN
MONITOR MENUMONITOR MENU
POWERPOWER CTRLCTRL
SOURCESOURCE MENU PBCMENU PBC
11
5 5 8 8
99
DISPLAYDISPLAY SUBTITLESUBTITLE SLOWSLOW PROGRAMPROGRAM
USB/SDUSB/SD AUDIOAUDIO
SETUPSETUP
FMFM
__
EJECTEJECT
TITLETITLE
22
33
6 6
7 7
CLEARCLEAR
11
00
00 //
00
11
+ +
MUTEMUTE
REPEATREPEAT
ZOOMZOOM
ENTERENTER
V
V
O
O
++
L
L
44
One IR-Remote Control
One Multimedia
Player
Fig.1
Mounting Bracket
Tapping Screws ( 4X10)
Mounting Bolts(D 5x6)
Fig.2
1. Determine the mounting location and drill four mounting holes (See Fig.1).
2. Attach the mounting bracket to the holes with the tapping screws ( 4X10).
4. Open the monitor to display the four screw holes.
5. Attach the unit to the bracket with the mounting bolts (D 5X6).
7. When the installation has completed, you can also turn the display upward or
downward to adjust the viewing angle. (See the arrowhead symbol in Fig.2).
1x RCA Audio / Video cable.
Page 2 of 25 pages
This User Manual.
Page 23 of 25 pages
1) SINGLE (All the songs / videos will be played only once)
2) REPEAT ONE (The current playing song / video will be repeated)
3) REPEAT FOLDER (Only the songs / videos of the current folder will be repeated)
4) FOLDER (Only all the songs / videos of this folder will be played once)
5) SHUFFLE / RANDOM (The songs / videos will be played in random order)
When the disc is playing, press REPEAT to select your repeat mode, the TV screen
will show:
Other functions
Functions such as MUTE, VOLUME, PAUSE, PREVIOUS, NEXT, etc. are also available
for MP3 / MPEG4 recorded discs. These operations are the same as playing an Audio
CD.
CONTROL REFERENCE GUIDECONTROL REFERENCE GUIDE
The Multimedia Player
1
2
MENU UP
SOURCE DOWN
6
7
12
8
9
10
18
4
3
5
13 14
20
19
11
15 16 17
Page 22 of 25 pages
1/9 Dome Light
2 Power
3 Play/Pause
4 Stop
5 Disc slot
6 Previous
7 Next
8 Eject
10 11 Inch LCD Screen
11 Open
12 turn on Dome light
13 Door Control
14 turn off Dome light
15 Right Audio Input
16 Left Audio Input
17 Composite Video Input
18 Infra Red Sensor
19 USB
20 SD
Page 3 of 25 pages
The 11 inch TFT color LCD Monitor
Enter the PIN numbers with the number buttons of the remote control and press PLAY ,
enter the new password and press PLAY again, confirm your new password and press
PLAY again.
Important: Do not forget the newly entered password, there is no way to retrieve the
(newly) entered password.
MENU UP
SOURCE DOWN
Enter the PIN numbers with the number buttons of the remote control and press PLAY ,
enter the new password and press PLAY again, confirm your new password and press
PLAY again.
Important: Do not forget the newly entered password, there is no way to retrieve the
(newly) entered password.
With this selection X you exit the system
setup and return to normal viewing of the
EXIT SETUP MENUEXIT SETUP MENU
video.
1 2 6 3 4
5
12- SRC
3- Adjust decrease
4- Menu Selection: Brightness, Saturation, Sharpness, Contrast, Reset
5- Adjust increase
6- Control Sensor Pick Up
1 Press the [POWER] button to power on or off the TFT color LCD Monitor.
2 Press the [MENU] button to toggle between Brightness, Color, Contrast, Tint , and
adjust the level with the [ ] or [ ] button.
Note:
The TFT color LCD is made of glass and liquid, do not apply pressure on the screen
to prevent breakage and poor image quality.
Do not scratch the screen surface with hard materials and only clean with a soft dry
cloth.
MP3/MPEG4 PLAYBACKMP3/MPEG4 PLAYBACK
The Multimedia player is able to play discs (CD-R / CD-RW) recorded with MP3 /
MPEG4 audio and video files. When a disc with MP3 or MPEG4 files (including multiple
directories) is loaded in the system the following screen is displayed:
To go to the preferred music or video directory, press the arrows to scroll to your
selection and confirm your choice by pressing the PLAY button. To select your preferred
song or video title, press the arrows to scroll to your selection and confirm your
choice by pressing the PLAY button. Your selected song or video will now be played.
Play mode
There are four kinds of play modes available when playing MP3 / MPEG4(.AV1) recorded discs:
Page 4 of 25 pages
Page 21 of 25 pages
PREFERENCE PAGEPREFERENCE PAGE
PREFERENCE PAGEPREFERENCE PAGE
LOAD FACTORY SETTINGLOAD FACTORY SETTING
TV TYPE PALTV TYPE PAL
PBC OFFPBC OFF
PARENT ALPARENT AL
DEFAULTDEFAULT
RESETRESET
With this option you can select to reset to
the factory preset values.
PREFERENCE PAGEPREFERENCE PAGE
LOAD FACTORY SETTINGLOAD FACTORY SETTING
TV TYPE PALTV TYPE PAL
PBC OFFPBC OFF
PARENT ALPARENT AL
DEFAULTDEFAULT
RESETRESET
With this option you can select to reset to
the factory preset values.
PASSWORD SETUP PAGEPASSWORD SETUP PAGE
PASSWORD MODEPASSWORD MODE
PASSWORD MODE ONPASSWORD MODE ON
PASSWORD PASSWORD
ONON
OFFOFF
With this option you can select to set your
password protection ON or OFF.
TV TYPE PALTV TYPE PAL
PBC OFFPBC OFF
PARENT ALPARENT AL
DEFAULTDEFAULT
SET PARENTAL CONTROLSET PARENTAL CONTROL
1 KIO SAF1 KIO SAF
2 G2 G
3 PG3 PG
4 PG 134 PG 13
5 PGR5 PGR
6 R6 R
7 NC177 NC17
8 ADULT8 ADULT
Set age control grade:
For DVD discs with a rating system progr
-ammed (for example: the North American
CARA) parents can prohibit watching con
-tent that might be inadvisable for children.
Press the RIGHT arrow to enter the
submenu. If you want to change the age
control grade press either the UP or
DOWN arrow to scroll to the available sel
-ections. Selection 1 is Kid safe, selection
2 is some guidance advisable, selection 3
is PG (Parental guidance suggested, some
material may not be suitable for children),
selection 4 is PG13 (Parents strongly cau
-tioned, some material may be inappropr
-iate for children under 13), selection 5 is
PG-R (Restricted, under 17 requires acco
-mpanying parent or adult guardian), sele
-ction 6 is Restricted viewing, selection 7
is NC-17 (No one 17 and under admitted),
selection 8 is for Adult Entertainment or X
rated movies and NO PARENTAL is for
General Audiences (All Ages).
PREFERENCE PAGEPREFERENCE PAGE
TV TYPE PALTV TYPE PAL
PBC OFFPBC OFF
PARENT ALPARENT AL
DEFAULTDEFAULT
LOAD FACTORY SETTINGLOAD FACTORY SETTING
RESETRESET
With this option you can select to reset to
the factory preset values.
PASSWORD SETUP PAGEPASSWORD SETUP PAGE
PASSWORD MODE ONPASSWORD MODE ON
PASSWORD PASSWORD
PASSWORD MODEPASSWORD MODE
ONON
OFFOFF
With this option you can select to set your
password protection ON or OFF.
PASSWORD SETUP PAGEPASSWORD SETUP PAGE
PASSWORD MODE ONPASSWORD MODE ON
PASSWORD PASSWORD
CHANGECHANGE
The IR Remote Control
Point the remote control no more
than about 3~4 meters (approx. 21
feet) from the remote control sensor
on the front of the player and keep
with in a 30 angle.
(1) Adjust Decrease
(2) Adjust Increase
(3) Title
(4) Eject
(5) Number buttons
(6) Clear
(7) Slow
(8) Program
(9) Mute
(10) Repeat
(11) Zoom
(12) play/pause
(13) Right Arrow
(14) Stop&Return
(15) Fast Reverse
(16) Fast Forward
(17) Previous
(18) Next
(19) Monitor Menu
(20) Power
(21) Menu/PBC
(22) Source
(23)Subtitle
(24)Display
23 23
19 19
20 20
21 21
2222
24 24
25 25
26 26
27 27
2525
29 29
30 30
31 31
3232
3333
3434
MONITOR MENUMONITOR MENU
POWERPOWER CTRLCTRL
SOURCESOURCE MENU PBCMENU PBC
22
11
55 8 8
6 6
99
00
11
DISPLAYDISPLAY SUBTITLESUBTITLE SLOWSLOW PROGRAMPROGRAM
USB/SDUSB/SD AUDIOAUDIO
SETUPSETUP
ENTERENTER
FMFM
V
V
__
O
O
++
L
L
EJECTEJECT
TITLETITLE
44
33
7 7
CLEARCLEAR
11
00
00 //
+ +
MUTEMUTE
REPEATREPEAT
ZOOMZOOM
(25) Audio
(26) USB/SD
(27) Up Arrow
(28) Setup
(29) Enter
(30) Left Arrow
(31) Down Arrow
(32) FM
(33) Volume(34) Volume+
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
10 10
11 11
12 12
13 13
14 14
15 15
1616
17 17
18 18
Hereafter a screen will indicate to enter a
password, if the ex-factory password has
never been modified, you can use [123456]
by pressing the according number buttons
on the remote control. Select "YES" or
"NO" with either the left or the right arrow
key and press PLAY to confirm.
CHANGE PASSWORDCHANGE PASSWORD
Use this menu to change the factory set
password [123456]
OLD PASSWORD
NEW PASSWORD
CONFIRM PWD
Page 20 of 25 pages
OK
Note:
The distance may vary according to the brightness of ambient light.
If the remote is not used for an extended period of time, remove the batteries to prevent possible
damage from battery leakage and corrosion.
Do not place any objects between the remote control unit and the sensor on the unit.
Do not use the remote control unit, while simultaneously operating the remote control unit of any
other equipment, they may interfere resulting in improper operation.
The batteries normally last for about one year although depending how often the remote control
is used. If the remote control unit isn't working even when it is operated near The Multimedia player,
replace one the batteries with new batteries of the same make.
Incorrect use of batteries may cause them to leak, corrode or explode.
If leakage from the battery occurs, wipe the battery liquid from the battery compartment before
installing new batteries.
Make sure the IR sensor is not obstructed by the canvas carry bag.
Page 5 of 25 pages
CONNECTION
COLOR SETTING SETUPCOLOR SETTING SETUP
HUEHUE
SHARPNESS MIOSHARPNESS MIO
BRIGHTNESS 00BRIGHTNESS 00
CONTRAST 00CONTRAST 00
GAMMA NONEGAMMA NONE
HUE 00HUE 00
SATURATION 00SATURATION 00
LUMA DELAY 1 T LUMA DELAY 1 T
COLOR SETTING SETUPCOLOR SETTING SETUP
SATURA TIONSATURA TION
SHARPNESS MIOSHARPNESS MIO
BRIGHTNESS 00BRIGHTNESS 00
CONTRAST 00CONTRAST 00
GAMMA NONEGAMMA NONE
HUE 00HUE 00
SATURATION 00SATURATION 00
LUMA DELAY 1 T LUMA DELAY 1 T
COLOR SETTING SETUPCOLOR SETTING SETUP
SATURA TIONSATURA TION
SHARPNESS MIOSHARPNESS MIO
BRIGHTNESS 00BRIGHTNESS 00
CONTRAST 00CONTRAST 00
GAMMA NONEGAMMA NONE
HUE 00HUE 00
SATURATION 00SATURATION 00
LUMA DELAY 1 T LUMA DELAY 1 T
COLOR SETTING SETUPCOLOR SETTING SETUP
SATURA TIONSATURA TION
SHARPNESS MIOSHARPNESS MIO
BRIGHTNESS 00BRIGHTNESS 00
CONTRAST 00CONTRAST 00
GAMMA NONEGAMMA NONE
HUE 00HUE 00
SATURATION 00SATURATION 00
LUMA DELAY 1 T LUMA DELAY 1 T
SATURATIONSATURATION
SATURATIONSATURATION
0 0
You can set the Saturation to your liking.
Press PLAY/SA VE or the RIGHT arrow
to enter the Saturation control, then press
the UP or DOWN arrow to adjust the
image. Press the LEFT arrow to go back
to the menu.
CONNECTING THE UNIT TO AN EXTERNAL DVD GAME USING THE A/V CABLE (NOT
INCLUDED)
COLOR SETTING SETUPCOLOR SETTING SETUP
SHARPNESS MIOSHARPNESS MIO
BRIGHTNESS 00BRIGHTNESS 00
CONTRAST 00CONTRAST 00
GAMMA NONEGAMMA NONE
HUE 00HUE 00
SATURATION 00SATURATION 00
LUMA DELAY 1 T LUMA DELAY 1 T
COLOR SETTING SETUPCOLOR SETTING SETUP
SHARPNESS MIOSHARPNESS MIO
BRIGHTNESS 00BRIGHTNESS 00
CONTRAST 00CONTRAST 00
GAMMA NONEGAMMA NONE
HUE 00HUE 00
SATURATION 00SATURATION 00
LUMA DELAY 1 T LUMA DELAY 1 T
Composite Video (YELLOW)
Right Audio (RED)
Left Audio (WHITE)
DVD
GAME
HUEHUE
HUEHUE
00
HUEHUE
You can set the Hue (for NTSC) to your
liking. Press PLAY/SAVE or the RIGHT
arrow to enter the Hue control, then press
the UP or DOWN arrow to adjust the
image. Press the LEFT arrow to go
back to the menu.
PREFERENCE PAGEPREFERENCE PAGE
TV TYPE PALTV TYPE PAL
PBC OFFPBC OFF
PARENT ALPARENT AL
DEFAULTDEFAULT
SET TV STANDAROSET TV STANDARO
PALPAL
MULTIMULTI
NTSCNTSC
Select this menu item to set up your
preferred video output format. PAL is
commonly used in Europe and NTSC
is commonly used in the USA and Japan.
Select MULTI only if your TV supports
both formats, the output signal will follow
automatically the video format on the
DVD disc.
SATURA TIONSATURA TION
SATURATIONSATURATION
0 0
SATURATIONSATURATION
You can set the Saturation to your liking.
Press PLAY/SA VE or the RIGHT arrow
to enter the Saturation control, then press
the UP or DOWN arrow to adjust the
image. Press the LEFT arrow to go back
to the menu.
PREFERENCE PAGEPREFERENCE PAGE
TV TYPE PALTV TYPE PAL
PBC OFFPBC OFF
PARENT ALPARENT AL
DEFAULTDEFAULT
ONON
OFFOFF
SET PBC STATESET PBC STATE
For VCD and SVCD, this selection turns
ON or OFF the Playback Control (PBC)
function. VCD or SVCD media have PBC
menu's that contains the track list. The
default PBC state is set to ON. In OFF
mode, no tracks can be selected.
Page 6 of 25 pages
Page 19 of 25 pages
BASIC OPERATIONSBASIC OPERATIONS
PAL-NTSC Selection
To set up The Multimedia player according to the connected TFT LCD monitor and video
signal system, to play a DVD or any other video discs, follow these guidelines:
If the TFT LCD monitor is NTSC, press the N/P button on The Multimedia
Player until you see NTSC on your screen.
If the TFT LCD monitor is PAL, select PAL by pressing the N/P button on the
COLOR SETTING SETUPCOLOR SETTING SETUP
BASIC OPERATIONSBASIC OPERATIONS
PAL-NTSC Selection
To set up The Multimedia player according to the connected TFT LCD monitor and video
signal system, to play a DVD or any other video discs, follow these guidelines:
If the TFT LCD monitor is NTSC, press the N/P button on The Multimedia
Player until you see NTSC on your screen.
If the TFT LCD monitor is PAL, select PAL by pressing the N/P button on the
BASIC OPERATIONSBASIC OPERATIONS
PAL-NTSC Selection
To set up The Multimedia player according to the connected TFT LCD monitor and video
signal system, to play a DVD or any other video discs, follow these guidelines:
If the TFT LCD monitor is NTSC, press the N/P button on The Multimedia
Player until you see NTSC on your screen.
If the TFT LCD monitor is PAL, select PAL by pressing the N/P button on the
Until you see PAL on your screen:
If the TFT LCD monitor supports both PAL and NTSC, select MULTI by Pressing
The N/P button until you see MULTI on your screen.
Disc loading
Load one disc with the label side facing upwards and make sure you do not touch the
data side with your fingers.
Note:
Do not touch the content side of a disc
Do not stick any paper or stickers on a disc.
Do not force the disc in place, it is possible
You damage the disc or the unit itself, if a disc is
COLOR SETTING SETUPCOLOR SETTING SETUP
BRIGHTNESSBRIGHTNESS
SHARPNESS MIOSHARPNESS MIO
BRIGHTNESS 00BRIGHTNESS 00
CONTRAST 00CONTRAST 00
GAMMA NONEGAMMA NONE
HUE 00HUE 00
SATURATION 00SATURATION 00
LUMA DELAY 1 T LUMA DELAY 1 T
COLOR SETTING SETUPCOLOR SETTING SETUP
CONTRASTCONTRAST
SHARPNESS MIOSHARPNESS MIO
BRIGHTNESS 00BRIGHTNESS 00
CONTRAST 00CONTRAST 00
GAMMA NONEGAMMA NONE
HUE 00HUE 00
SATURATION 00SATURATION 00
LUMA DELAY 1 T LUMA DELAY 1 T
You can set the Brightness to your liking.
Press PLAY or the RIGHT arrow to
enter the brightness control, then press
the UP or DOWN arrow to adjust
the image. Press the LEFT arrow to
go back to the menu.
You can set the Contrast to your liking.
Press PLAY or the RIGHT arrow to
enter the brightness control, then press
the UP or DOWN arrow to adjust
the image. Press the LEFT arrow to
go back to the menu.
BASIC OPERATIONSBASIC OPERATIONS
PAL-NTSC Selection
To set up The Multimedia player according to the connected TFT LCD monitor and video
signal system, to play a DVD or any other video discs, follow these guidelines:
If the TFT LCD monitor is NTSC, press the N/P button on The Multimedia
Player until you see NTSC on your screen.
If the TFT LCD monitor is PAL, select PAL by pressing the N/P button on the
Until you see PAL on your screen:
If the TFT LCD monitor supports both PAL and NTSC, select MULTI by Pressing
The N/P button until you see MULTI on your screen.
Disc loading
Load one disc with the label side facing upwards and make sure you do not touch the
data side with your fingers.
Note:
Do not touch the content side of a disc
Do not stick any paper or stickers on a disc.
Do not force the disc in place, it is possible
You damage the disc or the unit itself, if a disc is
COLOR SETTING SETUPCOLOR SETTING SETUP
CONTRASTCONTRAST
SHARPNESS MIOSHARPNESS MIO
BRIGHTNESS 00BRIGHTNESS 00
CONTRAST 00CONTRAST 00
GAMMA NONEGAMMA NONE
HUE 00HUE 00
SATURATION 00SATURATION 00
LUMA DELAY 1 T LUMA DELAY 1 T
You can set the Contrast to your liking.
Press PLAY or the RIGHT arrow to
enter the brightness control, then press
the UP or DOWN arrow to adjust
the image. Press the LEFT arrow to
go back to the menu.
BASIC OPERATIONSBASIC OPERATIONS
PAL-NTSC Selection
To set up The Multimedia player according to the connected TFT LCD monitor and video
signal system, to play a DVD or any other video discs, follow these guidelines:
If the TFT LCD monitor is NTSC, press the N/P button on The Multimedia
Player until you see NTSC on your screen.
If the TFT LCD monitor is PAL, select PAL by pressing the N/P button on the
Until you see PAL on your screen:
If the TFT LCD monitor supports both PAL and NTSC, select MULTI by Pressing
The N/P button until you see MULTI on your screen.
Disc loading
Load one disc with the label side facing upwards and make sure you do not touch the
data side with your fingers.
Note:
Do not touch the content side of a disc
Do not stick any paper or stickers on a disc.
Do not force the disc in place, it is possible
You damage the disc or the unit itself, if a disc is
not placed correctly on the guides in the disc
tray.
Finger prints and dust on the disc surface can affect the sound and picture quality. Clean the
discs regularly with a soft cotton cloth from the disc center to the outside of the disc. Do not clean
in circular motions.
Do not use any kind of solvent, such as diluting agent, gasoline, liquid detergent, and gasoline l
iquid detergent antistatic aerosol used for vinyl, this may cause serious disc damage.
Keep discs away from direct sunlight or any heat source
COLOR SETTING SETUPCOLOR SETTING SETUP
BRIGHTNESSBRIGHTNESS
SHARPNESS MIOSHARPNESS MIO
BRIGHTNESS 00BRIGHTNESS 00
CONTRAST 00CONTRAST 00
GAMMA NONEGAMMA NONE
HUE 00HUE 00
SATURATION 00SATURATION 00
LUMA DELAY 1 T LUMA DELAY 1 T
COLOR SETTING SETUPCOLOR SETTING SETUP
CONTRASTCONTRAST
SHARPNESS MIOSHARPNESS MIO
BRIGHTNESS 00BRIGHTNESS 00
CONTRAST 00CONTRAST 00
GAMMA NONEGAMMA NONE
HUE 00HUE 00
SATURATION 00SATURATION 00
LUMA DELAY 1 T LUMA DELAY 1 T
You can set the Brightness to your liking.
Press PLAY or the RIGHT arrow to
enter the brightness control, then press
the UP or DOWN arrow to adjust
the image. Press the LEFT arrow to
go back to the menu.
You can set the Contrast to your liking.
Press PLAY or the RIGHT arrow to
enter the brightness control, then press
the UP or DOWN arrow to adjust
the image. Press the LEFT arrow to
go back to the menu.
BRIGHTNESSBRIGHTNESS
BRIGHTNESSBRIGHTNESS
00
CONTRASTCONTRAST
CONTRASTCONTRAST
0 0
BASIC OPERATIONSBASIC OPERATIONS
PAL-NTSC Selection
To set up The Multimedia player according to the connected TFT LCD monitor and video
signal system, to play a DVD or any other video discs, follow these guidelines:
If the TFT LCD monitor is NTSC, press the N/P button on The Multimedia
Player until you see NTSC on your screen.
If the TFT LCD monitor is PAL, select PAL by pressing the N/P button on the
Until you see PAL on your screen:
If the TFT LCD monitor supports both PAL and NTSC, select MULTI by Pressing
The N/P button until you see MULTI on your screen.
Disc loading
Load one disc with the label side facing upwards and make sure you do not touch the
data side with your fingers.
Note:
Do not touch the content side of a disc
Do not stick any paper or stickers on a disc.
Do not force the disc in place, it is possible
You damage the disc or the unit itself, if a disc is
not placed correctly on the guides in the disc
tray.
Finger prints and dust on the disc surface can affect the sound and picture quality. Clean the
discs regularly with a soft cotton cloth from the disc center to the outside of the disc. Do not clean
in circular motions.
Do not use any kind of solvent, such as diluting agent, gasoline, liquid detergent, and gasoline l
iquid detergent antistatic aerosol used for vinyl, this may cause serious disc damage.
Keep discs away from direct sunlight or any heat source
COLOR SETTING SETUPCOLOR SETTING SETUP
CONTRASTCONTRAST
SHARPNESS MIOSHARPNESS MIO
BRIGHTNESS 00BRIGHTNESS 00
CONTRAST 00CONTRAST 00
GAMMA NONEGAMMA NONE
HUE 00HUE 00
SATURATION 00SATURATION 00
LUMA DELAY 1 T LUMA DELAY 1 T
You can set the Contrast to your liking.
Press PLAY or the RIGHT arrow to
enter the brightness control, then press
the UP or DOWN arrow to adjust
the image. Press the LEFT arrow to
go back to the menu.
CONTRASTCONTRAST
CONTRASTCONTRAST
0 0
SHARPNESS MIOSHARPNESS MIO
BRIGHTNESS 00BRIGHTNESS 00
CONTRAST 00CONTRAST 00
GAMMA NONEGAMMA NONE
HUE 00HUE 00
SATURATION 00SATURATION 00
LUMA DELAY 1 T LUMA DELAY 1 T
BRIGHTNESSBRIGHTNESS
You can set the Brightness to your liking.
Press PLAY or the RIGHT arrow to
enter the brightness control, then press
the UP or DOWN arrow to adjust
the image. Press the LEFT arrow to
go back to the menu.
BRIGHTNESSBRIGHTNESS
BRIGHTNESSBRIGHTNESS
COLOR SETTING SETUPCOLOR SETTING SETUP
SHARPNESS MIOSHARPNESS MIO
BRIGHTNESS 00BRIGHTNESS 00
CONTRAST 00CONTRAST 00
GAMMA NONEGAMMA NONE
HUE 00HUE 00
SATURATION 00SATURATION 00
LUMA DELAY 1 T LUMA DELAY 1 T
GAMMAGAMMA
HIGHHIGH
MEDIUMMEDIUM
LOWLOW
NONENONE
Gamma refers to the exponent between
video or pixel values and the displayed
brightness. You can set the Gamma to
these choices and your liking.
COLOR SETTING SETUPCOLOR SETTING SETUP
SHARPNESS MIOSHARPNESS MIO
BRIGHTNESS 00BRIGHTNESS 00
CONTRAST 00CONTRAST 00
GAMMA NONEGAMMA NONE
HUE 00HUE 00
SATURATION 00SATURATION 00
LUMA DELAY 1 T LUMA DELAY 1 T
CONTRASTCONTRAST
You can set the Contrast to your liking.
Press PLAY or the RIGHT arrow to
00
enter the brightness control, then press
the UP or DOWN arrow to adjust
the image. Press the LEFT arrow to
go back to the menu.
Luma Delay You can adjust the luminance
delay by selecting one of these choices to
CONTRASTCONTRAST
CONTRASTCONTRAST
COLOR SETTING SETUPCOLOR SETTING SETUP
SHARPNESS MIOSHARPNESS MIO
BRIGHTNESS 00BRIGHTNESS 00
CONTRAST 00CONTRAST 00
GAMMA NONEGAMMA NONE
HUE 00HUE 00
SATURATION 00SATURATION 00
LUMA DELAY 1 T LUMA DELAY 1 T
LUMA DELAYLUMA DELAY
0 T0 T
1 T1 T
best suit the brightness of your TV.
Page 18 of 25 pages
BASIC OPERATIONSBASIC OPERATIONS
PAL-NTSC Selection
To set up The Multimedia player according to the connected TFT LCD monitor and video
signal system, to play a DVD or any other video discs, follow these guidelines:
If the TFT LCD monitor is NTSC, press the N/P button on The Multimedia
Player until you see NTSC on your screen.
If the TFT LCD monitor is PAL, select PAL by pressing the N/P button on the
Until you see PAL on your screen:
If the TFT LCD monitor supports both PAL and NTSC, select MULTI by Pressing
0 0
The N/P button until you see MULTI on your screen.
Disc loading
Load one disc with the label side facing upwards and make sure you do not touch the
data side with your fingers.
Note:
MENU UP
SOURCE DOWN
Finger prints and dust on the disc surface can affect the sound and picture quality. Clean the
discs regularly with a soft cotton cloth from the disc center to the outside of the disc. Do not clean
in circular motions.
Do not use any kind of solvent, such as diluting agent, gasoline, liquid detergent, and gasoline l
iquid detergent antistatic aerosol used for vinyl, this may cause serious disc damage.
Keep discs away from direct sunlight or any heat source
The Multimedia player is a precision device. If the optical pick-up lens and disc drive parts
become dirty or worn down, picture quality will become poor. To obtain a clear picture, regular
inspection and maintenance are recommended every 1,000 hours of use, depending on the
operating environment.
Once the disc is loaded, the unit will automatically start reading the disk and it will take
a few seconds to download the disc initial data, thereafter the disc type will be displayed
in the left upper corner of the LCD screen and the unit will start playing the disc.
Page 7 of 25 pages
Do not touch the content side of a disc
Do not stick any paper or stickers on a disc.
Do not force the disc in place, it is possible
You damage the disc or the unit itself, if a disc is
not placed correctly on the guides in the disc
tray.
Pause / Stop / Play
3D PROCESSING PAGE3D PROCESSING PAGE
PRO LOGIC II PRO LOGIC II
REVERB MODE OFFREVERB MODE OFF
REVERB MODEREVERB MODE
OFFOFF
CONCERTCONCERT
LIVING ROOMLIVING ROOM
HALLHALL
BATHROOMBATHROOM
CAVECAVE
ARENAARENA
CHURCHCHURCH
Select 3D PROCESSING to set up your
preferred 3D mode. Press PLAY to enter
this selection and to set up your preferred
Audio mode for a better surround effect.
Press PLAY/SA VE or the RIGHT arrow
to enter this selection.
VIDEO SETUP PAGEVIDEO SETUP PAGE
GOTO VIDEO SETUP PAGEGOTO VIDEO SETUP PAGE
COLOR SETTINGCOLOR SETTING
Select this menu item to set up your Video
Quality modes. Press PLAY to enter this
selection.
When a disc is playing press the PAUSE button on the remote control or on the
Multimedia player to pause the session. Press the PLAY button on the remote
control or the Multimedia player to resume playing the disc.
Press the STOP button once on the remote control or The Multimedia player to
stop playing a disc. The unit will memorize the position on the disk and will continue to
play from that position if the PLAY button on the remote control or The Multimedia
player is pressed.
Press STOP STOP twice to completely stop playing a disc. When the PLAY button
on the remote control or the Multimedia player is pressed hereafter, the unit will not
resume playing from the position the disc was interrupted at. Note: The Disc continues to
spin for approximately 4 minutes after pressing the stop button.
Select menu items
In either the disc menu or the setup menu:
(1) Press the / / / arrow buttons to move between selectable items.
(2) Press the PLAY button to confirm and/or execute a selection
ADVANCED OPERATION ADVANCED OPERATION
Select a specific on-disc Menu section
When the DVD disc contains an on-disc menu, you can display and access this menu
by pressing either the MENU button on the Remote Control. (Note: PBC must be turned
on.)
(1) Press the MENU button. You will now see the menu of the DVD (if available) and
the selection choices in this menu.
(2) Press one of the arrow buttons to scroll
through the displayed (sub) menu items. Press PLAY to confirm the selection.
(3) Alternatively, use the Number buttons to make a selection. For example: To
select the 13th song, press 10+ then 3
Audio CD discs, track selection
Load an Audio disc, upon reading the disc, you can select/play songs via the number
buttons. If the track number is lower than 10, press a number button 0 9 to select the
desired track. For example: to select the 8th track, press number button 8. To select track
numbers beyond 10, first press the 10+ button, followed by a single digit number button
0 9 For example: To select the 12th song, press button 10+ and then press button 2.
3D PROCESSING PAGE3D PROCESSING PAGE
PRO LOGIC II PRO LOGIC II
REVERB MODE OFFREVERB MODE OFF
REVERB MODEREVERB MODE
OFFOFF
CONCERTCONCERT
LIVING ROOMLIVING ROOM
HALLHALL
BATHROOMBATHROOM
CAVECAVE
ARENAARENA
CHURCHCHURCH
Select 3D PROCESSING to set up your
preferred 3D mode. Press PLAY to enter
this selection and to set up your preferred
Audio mode for a better surround effect.
Press PLAY/SA VE or the RIGHT arrow
to enter this selection.
HDCD SETUP PAGEHDCD SETUP PAGE
FILTER 1X FILTER 1X
FILTERFILTER
OFFOFF
1X1X
2X2X
Select HDCD to set up your preferred
Audio mode for HDCD. Press PLAY to
enter this selection and to set up your
preferred filter mode for HDCD
(default is 1X).
1x = 48K Sampling, 2x = 96K Sampling
VIDEO SETUP PAGEVIDEO SETUP PAGE
COLOR SETTINGCOLOR SETTING
GOTO VIDEO SETUP PAGEGOTO VIDEO SETUP PAGE
Select this menu item to set up your Video
Quality modes. Press PLAY to enter this
selection.
COLOR SETTING SETUPCOLOR SETTING SETUP
SHARPNESS MIOSHARPNESS MIO
BRIGHTNESS 00BRIGHTNESS 00
CONTRAST 00CONTRAST 00
GAMMA NONEGAMMA NONE
HUE 00HUE 00
SATURATION 00SATURATION 00
LUMA DELAY 1 T LUMA DELAY 1 T
SHARPNESSSHARPNESS
HIGHHIGH
MEDIUMMEDIUM
LOWLOW
You can set the picture sharpness to these
choices. If a video image is light, select the
LOW option. If a video image is dark, select
the option.HIGH
Page 8 of 25 pages
Page 17 of 25 pages
AUDIO SETUP PAGEAUDIO SETUP PAGE
EQUALIZER PAGEEQUALIZER PAGE
SOUND MODE OFFSOUND MODE OFF
BASS BOOST OFFBASS BOOST OFF
SUPER BASS OFF SUPER BASS OFF
TREBLE BOOST OFFTREBLE BOOST OFF
SELECT EQUALIZER TYPESELECT EQUALIZER TYPE
OFFOFF
ROCKROCK
POPPOP
LIVELIVE
DANCEDANCE
TECHNOTECHNO
CLASSICCLASSIC
SOFTSOFT
EQUALIZER PAGEEQUALIZER PAGE
SOUND MODE OFFSOUND MODE OFF
BASS BOOST OFFBASS BOOST OFF
SUPER BASS OFF SUPER BASS OFF
TREBLE BOOST OFFTREBLE BOOST OFF
BASS BOOSTBASS BOOST
ONON
OFFOFF
EQUALIZER PAGEEQUALIZER PAGE
SOUND MODE OFFSOUND MODE OFF
BASS BOOST OFFBASS BOOST OFF
SUPER BASS OFF SUPER BASS OFF
TREBLE BOOST OFFTREBLE BOOST OFF
SELECT EQUALIZER TYPESELECT EQUALIZER TYPE
OFFOFF
ROCKROCK
POPPOP
LIVELIVE
DANCEDANCE
TECHNOTECHNO
CLASSICCLASSIC
SOFTSOFT
EQUALIZER PAGEEQUALIZER PAGE
SOUND MODE OFFSOUND MODE OFF
BASS BOOST OFFBASS BOOST OFF
SUPER BASS OFF SUPER BASS OFF
TREBLE BOOST OFFTREBLE BOOST OFF
BASS BOOSTBASS BOOST
ONON
OFFOFF
EQUALIZER PAGEEQUALIZER PAGE
SOUND MODE OFFSOUND MODE OFF
BASS BOOST OFFBASS BOOST OFF
SUPER BASS OFF SUPER BASS OFF
TREBLE BOOST OFFTREBLE BOOST OFF
SUPER BASSSUPER BASS
ONON
OFFOFF
ANALOG AUDIO SETUPANALOG AUDIO SETUP
EQUALIZEREQUALIZER
3D PROCESSING 3D PROCESSING
HDCDHDCD
GOTO AUDIO SETUP PAGEGOTO AUDIO SETUP PAGE
Press PLAY to enter the Analog Audio
setup page. The page hereunder will
be shown:
ANALOG AUDIO SETUP PAGEANALOG AUDIO SETUP PAGE
DOWNMIX STRDOWNMIX STR
SET DOWNMIX MODESET DOWNMIX MODE
Set sound mix output mode:
press the RIGHT arrow to enter the
sub-menu. If you want analog stereo
signals, set the sound mode to
"STEREO",press the DOWN arrow
once to move the selection to
"STEREO", than press PLAY.
If you want to have Dolby Pro Logic
stereo (the decoded signal will create
a 2ch reality simulating effect via the
R/L connectors), select "LT/RT", then
press PLAY.
You can select one of these modes to
adjust the Bass and Treble signal to
your best liking. ON will switch the
selected mode on and OFF will switch
it back to normal Audio playback.
Note: Please be advised that sometimes the BASS on an Audio CD or
DVD is already very low, using the
Bass Boost or Super Bass can overload
your speakers resulting in poor sound
quality.
LT/RTLT/RT
STEREOSTEREO
EQUALIZER PAGEEQUALIZER PAGE
SOUND MODE OFFSOUND MODE OFF
BASS BOOST OFFBASS BOOST OFF
SUPER BASS OFF SUPER BASS OFF
TREBLE BOOST OFFTREBLE BOOST OFF
SELECT EQUALIZER TYPESELECT EQUALIZER TYPE
EQUALIZER Select this menu item to
set up your preferred Equalizer mode.
Press PLAY to enter this selection.
You can select one of these preset
Equalizer modes to adjust the audio
signal to your best liking.
EQUALIZER PAGEEQUALIZER PAGE
SOUND MODE OFFSOUND MODE OFF
BASS BOOST OFFBASS BOOST OFF
SUPER BASS OFF SUPER BASS OFF
TREBLE BOOST OFFTREBLE BOOST OFF
BASS BOOSTBASS BOOST
EQUALIZER PAGEEQUALIZER PAGE
SOUND MODE OFFSOUND MODE OFF
BASS BOOST OFFBASS BOOST OFF
SUPER BASS OFF SUPER BASS OFF
TREBLE BOOST OFFTREBLE BOOST OFF
SUPER BASSSUPER BASS
EQUALIZER PAGEEQUALIZER PAGE
SOUND MODE OFFSOUND MODE OFF
BASS BOOST OFFBASS BOOST OFF
SUPER BASS OFF SUPER BASS OFF
TREBLE BOOST OFFTREBLE BOOST OFF
TREBLE BOOSTTREBLE BOOST
Page 16 of 25 pages
OFFOFF
ROCKROCK
POPPOP
LIVELIVE
DANCEDANCE
TECHNOTECHNO
CLASSICCLASSIC
SOFTSOFT
ONON
OFFOFF
ONON
OFFOFF
ONON
OFFOFF
Fast Forward
While the video is playing press the Fast Forward FWD button on either the
Multimedia player
or the remote control to play the video in Fast Forward (FFWD)
mode. Five different speeds are available and depend on the number of times this
button is pressed in sequence.
2x 4x 8x 16x 32x Normal play
4x 8x
2x
16x
32x
Normal
play
(DVD)
(Other Discs)
Fast Backward
While the video is playing press the Fast Backward button REV on either the
R or the remote control to play the video in Fast Backward (FRWD)
Multimedia player
mode. Five different speeds are available and depend on the number of times this
button is pressed in sequence.
2x 4x 8x 16x 32x
2x 4x 8x
16x
32x
Normal
Normal
play
play
(DVD)
(Other Discs)
Skip to the next chapter or track
When a DVD disc is played, press the NEXT button on either the remote control or
Multimedia player
The to skip to the next chapter. When other discs are played,
press this button to skip to the next track. Note: Whether this function works depends
on the disc type in use.
Skip to the previous chapter or track
When a DVD disc is played, press the PREVIOUS button on either the remote
control or The to skip to the previous chapter. When other discs
Multimedia player
are played, press this button to skip to the previous track. Note: Whether this function
works depends on the disc type in use.
Select a track
There are two options to select a next track.
1) Press either the PREVIOUS or the NEXT button as described above.
2) Press one or more of the NUMBER 0 9, 10+ buttons to enter the desired track
number to be played. When the screen is displaying a then this function is
not available. This might have one of the following reasons: A) The tracks on
the disks are not numbered; B) The entered number is incorrect; C) PBC is on
press the PBC button on the remote control to switch PBC off.
Display the track list
With PBC switched on and while the DVD disc is played, press MENU to display the
track list. Select a track with the up or down arrow and press PLAY to confirm your
track selection.
Page 9 of 25 pages
When playing a DVD disc and you have
selected ON, then the screen will show
the angle mark. This will give you the
possibility to view multi angle DVD's.
(whether this functions works, depends
on the disc type in use.) When you have
selected OFF, no angle mark will be
shown on the screen.
To select the language for your On Screen
Display (OSD) use this menu item. There
are multiple languages available.
To select the language for your On Screen
Display (OSD) use this menu item. There
are multiple languages available.
When playing a DVD disc and you have
selected ON, then the screen will show
the angle mark. This will give you the
possibility to view multi angle DVD's.
(whether this functions works, depends
on the disc type in use.) When you have
selected OFF, no angle mark will be
shown on the screen.
To select the language for your On Screen
Display (OSD) use this menu item. There
are multiple languages available.
GENERAL SETUP PAGEGENERAL SETUP PAGE
TV DISPLAY PS TV DISPLAY PS
ANGLE MARK ON ANGLE MARK ON
OSD LANGUAGE ENG OSD LANGUAGE ENG
CAPTIONS OFFCAPTIONS OFF
SCREEN SAVER ONSCREEN SAVER ON
LAST MEMORY ONLAST MEMORY ON
CAPTIONSCAPTIONS
ON ON
OFF OFF
GENERAL SETUP PAGEGENERAL SETUP PAGE
TV DISPLAY PS TV DISPLAY PS
ANGLE MARK ON ANGLE MARK ON
OSD LANGUAGE ENG OSD LANGUAGE ENG
CAPTIONS OFFCAPTIONS OFF
SCREEN SAVER ONSCREEN SAVER ON
LAST MEMORY ONLAST MEMORY ON
SCREEN SAVERSCREEN SAVER
ON ON
OFF OFF
ON: To display captions. (Subtitles)
OFF: Captions will not be displayed.
(No Subtitles)
When there is no activity with the Player
for some time, a screen saver will start to
prevent damage to the screen. Select ON
to activate the screen saver function or
select OFF to deactivate this function
Repeat
While a disc is playing press the REPEAT button to select one of the available repeat
modes.
1) For DVD discs;
a. press REPEAT to repeat a chapter
b. press REPEAT again to repeat a title
c. press REPEAT again repeat all
d. press REPEAT again to exit the repeat mode.
2) For non-DVD discs and when PBC is switched off;
a. press REPEAT to repeat a track
b. press REPEAT again to repeat the whole disc
c. press REPEAT again to exit the repeat mode
Select Subtitle Language
Press the SUBTITLE button to select the caption language e.g. English, Dutch,
Spanish, etc. Press the SUBTITLE button various times until you have selected
the desired language available.
Note: Whether this function works depends on the disc type in use.
On Screen Display (OSD)
The DISPLAY button can be pressed on the remote control to check the playing time
and the remaining time for each title/chapter/track. Also, it can display the remaining
time for the whole discs.
For DVD discs
Press the DISPLAY button once, the screen will show the elapsed time for the
current title..
Press the DISPLAY button twice, the screen will show the remaining time for title.
TITLE ELAPSED
TITLE ELAPSED
T: 01/01 C: 02/25
T: 01/01 C: 02/25
00:06:08
00:06:08
When playing a DVD disc and you have
selected ON, then the screen will show
the angle mark. This will give you the
possibility to view multi angle DVD's.
To select the language for your On Screen
Display (OSD) use this menu item. There
are multiple languages available.
(whether this functions works, depends
on the disc type in use.) When you have
selected OFF, no angle mark will be
shown on the screen.
GENERAL SETUP PAGEGENERAL SETUP PAGE
TV DISPLAY PS TV DISPLAY PS
ANGLE MARK ON ANGLE MARK ON
OSD LANGUAGE ENG OSD LANGUAGE ENG
CAPTIONS OFFCAPTIONS OFF
SCREEN SAVER ONSCREEN SAVER ON
LAST MEMORY ONLAST MEMORY ON
CAPTIONSCAPTIONS
ON ON
OFF OFF
ON: To display captions. (Subtitles)
OFF: Captions will not be displayed.
(No Subtitles)
GENERAL SETUP PAGEGENERAL SETUP PAGE
TV DISPLAY PS TV DISPLAY PS
ANGLE MARK ON ANGLE MARK ON
OSD LANGUAGE ENG OSD LANGUAGE ENG
CAPTIONS OFFCAPTIONS OFF
SCREEN SAVER ONSCREEN SAVER ON
LAST MEMORY ONLAST MEMORY ON
SCREEN SAVERSCREEN SAVER
ON ON
OFF OFF
When there is no activity with the Player
for some time, a screen saver will start to
prevent damage to the screen. Select ON
to activate the screen saver function or
select OFF to deactivate this function
GENERAL SETUP PAGEGENERAL SETUP PAGE
TV DISPLAY PS TV DISPLAY PS
ANGLE MARK ON ANGLE MARK ON
OSD LANGUAGE ENG OSD LANGUAGE ENG
CAPTIONS OFFCAPTIONS OFF
SCREEN SAVER ONSCREEN SAVER ON
LAST MEMORY ONLAST MEMORY ON
SET LAST MEMORY STATESET LAST MEMORY STATE
ON ON
OFF OFF
ON: Each time when you turn off the player, it will memorize the last play time. So if you
turn on the player the next time and the same disc is played, it will resume play from
the last memory point.
OFF : Disable the last memory function
TITLE REMAIN
TITLE REMAIN
T: 01/01 C: 02/25
T: 01/01 C: 02/25
1:30:08
1:30:08
Page 10 of 25 pages
Page 15 of 25 pages
4:3LB Allow you to see movies in their original aspect
4:3LB Allow you to see movies in their original aspect
ratio. The entire frame of the movie will be displayed.
16:9 recorded movies will occupy a smaller portion of
the screen and you will see black margins above and
below the picture.
4:3PS The movie will be shown full screen without any
black margins, but parts of the image will be cut of from
the right and left side.
16:9 Allow you to see movies in their original aspect
ratio, when connected to a wide screen TV. The entire
frame of the movie will be displayed.
16:9 Note: depending the DVD screen format (e.g. 2.35
:1), the wide screen setting may still have black margins
above and below the picture.
ratio. The entire frame of the movie will be displayed.
16:9 recorded movies will occupy a smaller portion of
the screen and you will see black margins above and
below the picture.
4:3PS The movie will be shown full screen without any
black margins, but parts of the image will be cut of from
the right and left side.
16:9 Allow you to see movies in their original aspect
ratio, when connected to a wide screen TV. The entire
frame of the movie will be displayed.
16:9 Note: depending the DVD screen format (e.g. 2.35
:1), the wide screen setting may still have black margins
above and below the picture.
For CD discs
To check for example the remaining time when playing the 2nd song, press the DISPLAY
button. The screen shows TC . This is the current track played.
TC
TC
T:04/10
T:04/10
00:03:08
00:03:08
Press the DISPLAY button twice and the screen will show the remaining time for the
current track.
TR
TR
T :04/10
T:04/10
00:03:08
00:03:08
Press the DISPLAY button for a third time and the screen will show the elapsed time for
the current disc.
Press the DISPLAY button for a 4th time and the screen will show the elapsed time for
the current chapter.
FM Frequency
Push this button to select the frequency and at the same time the monitor will show you
which frequency you have selected . So you can adjust the frequency on the radio
according to the frequency showed on the monitor.
ZOOM
This feature is used to zoom-in and zoom-out the video image of the motion pictures or
still images when playing DVD discs.
There are 3 levels of zoom-in available, pressing the ZOOM button several times to
increase the zoom factor in the following sequence:
GENERAL SETUP PAGEGENERAL SETUP PAGE
TV DISPLAY PS TV DISPLAY PS
ANGLE MARK ON ANGLE MARK ON
OSD LANGUAGE ENG OSD LANGUAGE ENG
CAPTIONS OFFCAPTIONS OFF
SCREEN SAVER ONSCREEN SAVER ON
LAST MEMORY ONLAST MEMORY ON
SET ANGLE MARKSET ANGLE MARK
GENERAL SETUP PAGEGENERAL SETUP PAGE
ON ON
OFF OFF
TV DISPLAY PS TV DISPLAY PS
ANGLE MARK ON ANGLE MARK ON
OSD LANGUAGE ENG OSD LANGUAGE ENG
CAPTIONS OFFCAPTIONS OFF
SCREEN SAVER ONSCREEN SAVER ON
LAST MEMORY ONLAST MEMORY ON
SET OSD LANGUAGESET OSD LANGUAGE
ENGLISH ENGLISH
GERMAN GERMAN
FRENCH FRENCH
SPANISHSPANISH
ITALIANITALIAN
PORTUGUESEPORTUGUESE
DUTCHDUTCH
DANISHDANISH
Page 14 of 25 pages
Hereafter there are also three levels to zoom-out, press the ZOOM button several times
to decrease the zoom factor in the following sequence:
Page 11 of 25 pages
GENERAL SETUP PAGEGENERAL SETUP PAGE
TV DISPLAY Wide TV DISPLAY Wide
ANGLE MARK ON ANGLE MARK ON
OSD LANGUAGE ENG OSD LANGUAGE ENG
CAPTIONS OFFCAPTIONS OFF
SCREEN SAVER ONSCREEN SAVER ON
LAST MEMORY ONLAST MEMORY ON
GOTO GENERAL SETUP PAGEGOTO GENERAL SETUP PAGE
Press the / / / arrow buttons to move the zoomed picture over your screen
(Panning).
To return to normal screen size, press the ZOOM for the 7th time.
Memory Play
Multimedia player
The can memorize the last stop point and play form this point
onwards when the unit is switched on again or when play is press again.
When playing, press the STOP button once to stop the playback. The
Multimedia player
will memorize the current position on the disc. Press the PLAY button to start
playing from the last memorized position. Pressing the STOP button twice will clear the
memorized position from the memory and if play is resumed, the disc will be played
from the beginning.
Slow play:
While playing , push [SLOW] to play film slowly at different speed. You can play slow
forward or backward, four shift speed are available for either of them. Push [SLOW]
once, the speed decreases by one shift , finally it returns to normal state.
SYSTEM SETTINGSSYSTEM SETTINGS
Press SETUP on the Remote Control to enter the system setting main menu.
Current item
GENERAL SETUP PAGEGENERAL SETUP PAGE
TV DISPLAY Wide TV DISPLAY Wide
ANGLE MARK ON ANGLE MARK ON
OSD LANGUAGE ENG OSD LANGUAGE ENG
CAPTIONS OFFCAPTIONS OFF
SCREEN SAVER ONSCREEN SAVER ON
LAST MEMORY ONLAST MEMORY ON
The explanation to
the current item.
On the Remote Control, press either the UP or DOWN or LEFT or RIGHT
arrow buttons to move to the desired menu item and press PLAY to select the menu item
GOTO GENERAL SETUP PAGEGOTO GENERAL SETUP PAGE
TV mode:
Press [SOURCE] to enter the TV mode. Press [SETUP] to set the TV function. The
screen will display as below.
CHANNEL:
CHANNEL: 2
SKIP: OFF
SKIP: OFF
BAND: VH
BAND: VH
FINE: 0
Press [ ] or [ ] to choose the AUTO SEARCH: OFF.
FINE: 0
AUTO SEARCH:OFF
AUTO SEARCH:OFF
III IIII I
- ---------------------------------------------------
CHANNEL:
CHANNEL: 2
SKIP: OFF
SKIP: OFF
BAND: VH
BAND: VH
FINE: 0
FINE: 0
AUTO SEARCH:OFF
AUTO SEARCH:OFF
III IIII I
- ---------------------------------------------------
Then press [ ] or [ ] of direction key, and choose ON by direction key, the unit will search
automatically, after search it will save the TV program automatically and play the first searched
program.
You can choose TV program by [ ] and [ ] of direction key or number key. For example,
if you want to choose 18th CH, please push [10+], it will display [- -], then push [1] and [8].
You can tune finely by [LEFT] and [RIGHT] of the direction key.
GENERAL SETUP PAGEGENERAL SETUP PAGE
TV DISPLAY PS TV DISPLAY PS
ANGLE MARK ON ANGLE MARK ON
OSD LANGUAGE ENG OSD LANGUAGE ENG
2
2
Set TV Display mode to the correct ratio:
CAPTIONS OFFCAPTIONS OFF
SCREEN SAVER ONSCREEN SAVER ON
LAST MEMORY ONLAST MEMORY ON
SET TV DISPLAY MODESET TV DISPLAY MODE
4:3 PANSCAN 4:3 PANSCAN
4:3 LETTERBOX 4:3 LETTERBOX
16:9 16:9
Press the RIGHT arrow button to enter the sub-menu. If you want to set the screen
to "WIDE", press the DOWN arrow twice to move your selection until the "WIDE"
item is selected, now press PLAY.
Press SETUP to exit these system settings
Note: three screen ratio modes are available, 16:9 WIDE, 4:3LB (Letterbox) and 4:3PS
(Pan Scan). Different disc formats will display different images depending this
setting and the screen size used.. Hereunder is an example of the different
choices and the relation between the disc format and screen ratio. of the
different choices and the relation
Page 12 of 25 pages
Page 13 of 25 pages
Loading...