USER GUIDE
Road Angel Group Ltd
Email: info@roadangelgroup.com
Web: www.roadangelgroup.com
Clark House
Silverstone Technology Park
Silverstone Circuit
Northants
NN12 8GX
Thank you for choosing the Navigator 9000, from Road Angel.
The Navigator 9000 was designed with the driver of the future in mind. Staying alert to
road and traffic conditions is a challenge - no matter how good a driver you are. That’s
why up-to-the-minute information is essential in making your journeys as safe and stress
free as possible. It’s also becoming increasingly important to be environmentally aware;
reducing those unnecessary and costly miles helps everyone.
That’s why we at Road Angel listen to our customers and keep track of the changes in
our industry. The ROAD ANGEL Navigator 9000 is a useful addition to any vehicle,
alerting you in advance to known hazards and providing point-to-point navigation. It is
simple-to-use and has a full-screen interface. The ROAD ANGEL Navigator 9000 uses a
comprehensive location database with information being included from the Police, Local
Authorities and Department for Transport regarding designated danger spots and safety
camera locations.
Using the latest Global Positioning Satellite (GPS) technology, ROAD ANGEL Navigator
9000 compares your position with the known danger spot locations and gives you an
audible and visual warning as you approach them. An accurate GPS speedometer in the
display gives you time to adjust your driving to the approaching danger.
The safety of you and your passengers is our prime consideration. As such, we at Road
Angel anticipate that your ROAD ANGEL Navigator 9000 will become your perfect
driving companion, enhancing the safety and enjoyment of your journey.
We hope you will be delighted with your ROAD ANGEL Navigator 9000. You are a
valued customer; we welcome feedback of your experiences with the product.
Dave Clark
Founder
Road Angel Group Ltd.
i
Table of Contents
1. Introduction....................................................................1
Unpacking the Box..................................................................................2
Subscriptions.......................................................................................... 4
Warranty..................................................................................................5
Security...................................................................................................5
Controls and Connectors........................................................................6
Inserting an SD Card..............................................................................7
The Reset Button ...................................................................................7
2. Registration....................................................................8
3. Putting It All Together..................................................10
4. Getting Started.............................................................12
Switching On for the First Time............................................................12
ROAD ANGEL Mode..............................................................................13
Understanding the Icons.......................................................................14
Navigation Mode ...................................................................................15
Tracking Mode .....................................................................................16
Browse Mode.......................................................................................17
Navigation Mode buttons ......................................................................18
Changing back to ROAD ANGEL mode.................................................19
ii
5. Hazard Warnings..........................................................20
Camera Locations.................................................................................21
Camera Van Locations.......................................................................... 22
Traffic Alerts.........................................................................................23
Other Hazards...................................................................................... 24
Acting on an Alert .................................................................................24
6. Destinations and Routes.............................................25
Entering an Address.............................................................................. 26
If you know the postcode.......................................................................27
If you don’t know the postcode..............................................................28
Fine-tuning...........................................................................................29
Points of Interest (POI).......................................................................... 30
Getting to a POI....................................................................................31
Favourites Options................................................................................33
Bookmarks........................................................................................... 34
Recent..................................................................................................35
Trips.....................................................................................................36
Presets.................................................................................................37
Using the Map........................................................................................ 39
Planning your Route..............................................................................41
Routing and Waylists............................................................................44
iii
7. Getting There...............................................................45
Changing a Route..................................................................................47
Making a Detour...................................................................................48
Editing the Waylist................................................................................49
Traffic Reports ......................................................................................50
Traffic Rerouting ...................................................................................51
8. Navigation Settings.....................................................52
Map Settings..........................................................................................53
About Info Layers .................................................................................54
Route Settings.......................................................................................55
General Settings....................................................................................57
9. Hazard and Device Settings........................................58
Hazard Settings.....................................................................................59
Audio...................................................................................................60
Distances.............................................................................................62
Alerts...................................................................................................63
Device Settings .....................................................................................64
Display Settings....................................................................................65
10. Adding and Deleting Danger Zones...........................66
Deleting zones.......................................................................................66
Adding new locations............................................................................67
iv
11. Updating the Database................................................69
Updating by PC/ActiveSync...................................................................70
12. Media and Remote Options.........................................71
Media Options........................................................................................72
Music ...................................................................................................72
Photos..................................................................................................73
Movie................................................................................................... 74
Remote Options.....................................................................................75
Text Messages .....................................................................................75
Weather Reports................................................................................... 77
13. Background Information.............................................78
About Global Positioning Satellites (GPS)............................................78
The ROAD ANGEL Database................................................................78
Using ROAD ANGEL Navigator 9000 Abroad ........................................79
Speed Cameras and Hazards ................................................................80
Alert Icons and Audio Text....................................................................83
Safety...................................................................................................83
Cameras...............................................................................................84
Other....................................................................................................84
Traffic................................................................................................... 85
14. Accessories..................................................................86
15. End User License Agreement .....................................87
1
1. Introduction
ROAD ANGEL Navigator 9000 uses the latest global positioning satellite technology
(based on the Sirf3 chipset) to give you point-to-point navigation information. It can alert
you to traffic problems on a planned route (using real-time traffic information received via
GPRS) and automatically calculate a new route to avoid the incident.
ROAD ANGEL Navigator 9000 displays a constantly updated and accurate speed
reading. Should you break down, ROAD ANGEL Navigator 9000 has RescueLoc, a
feature that allows you to pinpoint your location and direct rescue services to your
vehicle. There are audible and visible alerts as you approach hazardous sections of
road:
Accident black spots (as designated by the Police and Local Authorities)
Safety camera locations (including mobile vans)
Average speed monitoring zones
Primary schools
Congestion charging zones
Ungated railway crossings
Your unit, when it is switched on, receives updates automatically by GPRS: the wireless
data service available over the GSM network. You can also manually update your ROAD
ANGEL Navigator 9000 via an Internet-connected PC.
You can also use your ROAD ANGEL Navigator 9000 to:
Browse photos and watch videos
Listen to MP3 music files
Receive text messages and view weather reports.
2
IMPORTANT INFORMATION!
The directors of Road Angel Group Ltd sell ROAD ANGEL Navigator 9000 as a
road safety enhancement device. Driving within the speed limits at all times and
within the limitations of the road condition and your abilities is paramount. The
directors of Road Angel Group Ltd. take no responsibility for the use of ROAD
ANGEL Navigator 9000 for purposes other than those stipulated.
Placement
Position your ROAD ANGEL Navigator 9000 as low as possible on the screen so that it
does not impair your all-round visibility: we recommend you use either a central position
or by the A-post. The device should be mounted securely and all cables must be trained
via locations that do not impact any vehicle controls and importantly do not impede the
intended operation of any Air Bag zones. Do not leave the device in position when you
leave the vehicle unattended for security reasons (see page 5) and because it may suffer
heat damage if left in direct sunlight.
MOT Examinations
For vehicles undertaking MOT examinations, Road Angel or any dashboard mounted
device should either be removed, or adhere to the rules and regulations on positioning.
This normally restricts placement within the swept (windscreen wiper) area of the screen,
located as low as practical to minimise potential loss of visibility.
Safety
Road Angel driver safety and satellite navigation systems are designed with the sole
purpose of making drivers more aware of vehicle speed, the environment and potential
hazards ahead. To ensure Road Angel provides this information effectively and without
distraction, devices incorporate both visual and verbal instructions on the potential
hazard, along with in some cases, colour coded screens to remove the need for the
driver to take their eyes from the road ahead.
Under no circumstances, should Road Angel products be operated by the driver whilst
the vehicle is in motion. Road Angel devices are aimed at increasing driver awareness
and should always be considered secondary to the primary purpose of driving the
vehicle.
3
Unpacking the Box
Empty all the parts out of the box and familiarise yourself with each item. Each pack
contains:
Mains power adapter
Charge the unit before use
for cable-free operation.
12V/24V cigar socket lead
Connects unit to cigar socket for
in-car charging and power.
PC USB cable
Connects unit to PC for
manual updating using
ActiveSync
Cradle with mounting bracket
ROAD ANGEL Navigator 9000 unit
Fitted with SD card
4
Subscriptions
Your ROAD ANGEL Navigator 9000 subscription allows your unit to receive weather
reports, traffic information and updates to its camera and accident blackspot database
(you can also subscribe to tracking of your device: for more details go to
http://www.roadangelgroup.com/).
Why do you need to subscribe for updates?
With constant additions to the ROAD ANGEL camera and accident blackspot
database (1000+ sites per year), the benefit of your ROAD ANGEL Navigator 9000
and the protection it provides will be dramatically reduced if you fail to remain
subscribed. In this instance, your automatic updates will be disabled.
It is critical to the operation of your ROAD ANGEL Navigator 9000 that your unit
updates regularly. In areas of low GPRS coverage, manual updates via Active Sync
may be necessary (see page 70).
How do you subscribe?
1. You will need to complete an online Direct Debit form after registration (see page 8)
in order for us to process your request. If you prefer, you may print the form and
post it to us (our address is on the front of this manual). Alternatively you can
telephone our subscriptions team on 01327 855586.
2. There are two subscription options: monthly or yearly. Current subscription rates
can be found at http://www.roadangelgroup.com/.
3. Once your account has been set up we will write to you to confirm details of when
your first payment will be due.
Please be aware that all subscriptions are non-refundable and non-transferable.
How long will it take to activate your subscription?
Once we have receipt of your Direct Debit instruction, the process will take less
than 24 hours.
5
Warranty
Your ROAD ANGEL Navigator 9000 is guaranteed for one year from the date of
purchase from all manufacturing defects that occur with normal use. If your unit fails to
perform as specified in these instructions, please visit:
http://www.roadangelgroup.com/warranty
You can also purchase extended warranty and theft-loss insurance. Visit
http://www.roadangelgroup.com/ for details.
Security
Owing to the high number of thefts, we strongly suggest you remove your ROAD ANGEL
Navigator 9000 and its bracket from view when you leave your vehicle. Security can also
be increased by cleaning any marks from your windscreen.
6
Controls and Connectors
These are the main features of your ROAD ANGEL Navigator 9000:
Stylus
External
Antennae
connector (covered)
USB
connector
On/Off button
Charging indicator LED:
Red – charging
Green – fully charged
Earphone
socket
SD Card slot
(see page 7)
Reset
button
7
Inserting an SD Card
Insert as shown with SD card label facing to back of unit.
If you remove the card when the unit is in use you may receive an error message:”Fatal
Application Error. MobileNavigator.exe has performed an illegal operation and will be
shut down”. Press the Reset button and switch the unit back on to restart.
The Reset Button
Your ROAD ANGEL Navigator 9000 has a recessed reset button on its base. Use this:
If you have replaced the SD card, or
If you are having problems with your unit
Press the button using a pencil and then press the On/Off button to restart the unit.
Reset button
8
2. Registration
You can use your ROAD ANGEL Navigator 9000 straight out of the box but
to get the full benefit of up-to-the-minute safety, weather and travel
information you should register the unit, charge its internal battery and wait
for it to receive a SIM update.
Register your unit online:
1. Go to www.roadangelgroup.com
2. Click on the Product Registration link.
3. Follow the on-screen instructions.
You can also register by phone: call 01327
855586 (Mon-Fri 9am-5.30pm).
Charge the unit and get a SIM update:
1. Using the mains charger, connect your
ROAD ANGEL Navigator 9000 and
switch it on. Place it in a location where
there is a GSM signal (watch the phone
icon on the left of the screen as shown
below).
2. When your unit has been registered, it will receive a SIM update from Orange
within the next 24 hours (as long as the unit is on and has a GSM signal). This is
confirmed by a text message.
3. When you have received the SIM update, press the unit's Reset button and restart
your ROAD ANGEL Navigator 9000. Your unit will now receive updates
automatically.
Charging
in progress
GSM
coverage
OK
No GSM
coverage
Connected for
automatic
updates
9
Why should I register?
Registration is important for two reasons:
Your unit cannot receive updates until it has been registered.
Without registration, we cannot resolve warranty issues, log queries or solve problems with
your ROAD ANGEL Navigator 9000.
How do I update my ROAD ANGEL Navigator 9000?
Your unit receives updates automatically by GPRS. If you live in an area with low GPRS coverage,
you can update your ROAD ANGEL Navigator 9000 manually by connecting it to a PC using the
supplied USB cable. Please refer to the Updating the Database section on page 69 for details.
How much do updates cost?
Current subscription rates can be found at www.roadangelgroup.com.
10
3. Putting It All Together
This section explains how to fit your ROAD ANGEL Navigator 9000 into your vehicle:
1. Align the groove on the bottom edge of the cradle with the slot under the ROAD
ANGEL Navigator 9000:
2. Straighten the ROAD ANGEL Navigator 9000 so that the connector on the top of
the cradle slots into the back of the unit.
To remove the ROAD ANGEL Navigator 9000, press the release button on
the base of the cradle and gently pull the top of the unit forwards.
3. Take the power lead, and plug it into the socket on the rear of the cradle.
4. Hold the suction cup against the windscreen. Adjust the position of the unit by
twisting the mounting bracket’s ball-and-socket joint so that you can clearly see the
screen without the assembly obscuring your view through the windscreen.
5. Pull the locking lever upwards to apply suction. For maximum adhesion, it may help
to dampen the suction cup beforehand.
6. Route the power cable to the cigar socket. Ensure that it does not interfere with any
of the vehicle's controls or airbag modules. If you use your cigar socket for any
other devices, a dual adaptor may be used.
You are now ready to use the unit for the first time.
Locking lever
Release button
If the bracket
should become
loose, ensure
the two side
screws on the
pivot arm are
fastened tightly.
11
Where should I put my ROAD ANGEL Navigator 9000?
ROAD ANGEL Navigator 9000 has a high sensitivity GPS antenna and requires a clear view of the
sky to receive information from GPS satellites. We highly recommend that ROAD ANGEL
Navigator 9000 is positioned in the centre of the front windscreen, low down, just above the
dashboard (see page 2). If screen glare is a problem in this position, try installing the unit beside the
driver's “A-pillar”. Check that the GPS reception operates correctly in this position.
If you want to install ROAD ANGEL Navigator 9000 anywhere else within your vehicle, you may
require an external GPS antenna. Please contact Road Angel Group Ltd or visit
www.roadangelgroup.com for details.
My car has a UV/heated windscreen
UV screens block GPS signals from entering the vehicle, stopping ROAD ANGEL Navigator 9000
from acquiring its position. This can be a problem with certain models of vehicle, i.e. BMW,
Mercedes, Renault, Peugeot & Citroen. Heated screens can also affect GPS signal strength.
If your vehicle has a UV or heated screen, you may need an external antennae (please contact Road
Angel Group Ltd or visit www.roadangelgroup.com for details). Most vehicles fitted with a UV
screen have a defined section behind the rear view mirror where you can fit the antennae.
Can I hardwire the unit?
ROAD ANGEL Navigator 9000 has a 5V regulator built into its power cable.
If the cable is cut and used to hardwire the unit into the vehicle, you will
damage the ROAD ANGEL Navigator 9000.
To hardwire ROAD ANGEL Navigator 9000 into your vehicle, purchase a cigar socket; wire this
into the power system and use with the supplied cable.
Consult an auto electrician if you are unsure how to carry out this
procedure as incorrect hardwiring may affect the validity of vehicle and
product warranty. Consult vehicle manufacturer if in doubt.
12
4. Getting Started
Switching On for the First Time
1. Park your vehicle so that ROAD ANGEL Navigator 9000 has a clear view of the sky
away from obstacles such as tall buildings and over-hanging trees (these may
delay or prevent satellite acquisition).
2. Switch the ROAD ANGEL Navigator 9000 on by pressing the button on the top of
the unit (see page 6).
3. If a “Please Register” prompt is displayed, tap on the Continue button. If you have
registered the unit, it will update itself automatically when it establishes GPRS
connectivity.
If the unit continues to show the “Please Register...” screen at startup, you
may need to update the database manually (see page 70).
4. ROAD ANGEL Navigator 9000 now tries to identify its location by acquiring
information from GPS satellites. This may take a few minutes. During the
procedure, the unit displays the following screen.
Battery
charging
(see page 14)
GSM coverage
(see page 14)
13
ROAD ANGEL Mode
When ROAD ANGEL Navigator 9000 has identified its position it displays the full screen
ROAD ANGEL mode:
In this mode, you can start driving and ROAD ANGEL Navigator 9000 will show you your
speed and compass heading. If you are approaching a known hazard, it will alert you to
the type and proximity of the hazard (see page 20).
Alternatively, if you want ROAD ANGEL Navigator 9000 to guide you to your destination,
or to view on-screen map information, tap on the Navigation button to change to
Navigation mode. The first time you do this, you will be prompted to choose the
language, voice and time zone for the unit.
You can explore the Media and Remote functions of your ROAD ANGEL Navigator 9000
by tapping on the Menu button (see page 71 - please also read the important safety
information on page 2)
Battery charge
(see page 14)
Update icon
(see page 14)
GSM coverage
(see page 14)
Time &
date
Satellite
reception
(see page 14)
M
enu
button
Access Photo, Music
and Settings
Store location
button
Add current location to
unit’s camera database
Navigation
button
Switch to
Navigation mode
Heading
Speed
14
Understanding the Icons
This table explains the meanings of the icons used on the Searching for satellites and
ROAD ANGEL mode screens:
Battery charging Battery strength GSM network
coverage
GPS Satellite
coverage
20% Critical -
charge
unit
Starting up
Low
satellite
coverage
40% 20% No signal
60% 40% Error
80% 60% Ready -
poor signal
100% 80% Ready -
low signal
Good
satellite
coverage
Update status
100% Ready -
average
signal
Connected via
GPRS
Ready good
signal
Connected via
ActiveSync
Ready excellent
signal
15
Navigation Mode
When you switch to Navigation mode, ROAD ANGEL Navigator 9000 shows its
Navigation menu:
To view an on screen map of your current location, tap on the Map button. The Tracking
screen is displayed (see page 16).
The menu also provides a number of ways to specify your destination:
Address Enter a new address (see page 26).
Favourites Select a previously visited or bookmarked destination (see
page 33)
POI Search Search for a Point of Interest (see page 30).
Recent Choose your destination from a list of your recent trips
(see page 35).
You can also tap on the Device Menu button to return to the Road Angel mode or the
Settings button to modify the way that your ROAD ANGEL Navigator 9000 works (see
page 52).
16
Tracking Mode
In tracking mode, the display shows a map of your current GPS location and tracks your
route:
If you encounter a road hazard (see page 80), ROAD ANGEL Navigator 9000 will
provide visual, spoken and sound warnings about the type of hazard and its
proximity (see page 20).
Speed
Time
Elevation above
sea level
Latitude/
Longitude
GPS status
information
Compass rose
Back button
Zoom out
Current location
Info box
Zoom in
Menu button
Satellite status
(red: no coverage, green: OK)
Battery status
17
Browse Mode
If you tap anywhere on the Tracking screen, ROAD ANGEL Navigator 9000 stops
tracking your position and enters Browse mode. Now, you can use the map to find a
destination or get information about your surroundings.
Tap on a location on the map and ROAD ANGEL Navigator 9000 centres the view
at that point.
Use the + and – buttons, and the scroll bar that appears when you do so, to change
the magnification.
Tap on a road or POI (Point of Interest) icon to view information about it in the Info
box.
Browse mode
You can use this mode to identify a destination: tap on the Menu button for options. Tap
on the Back button (see below) to return to Tracking mode.
18
Navigation Mode buttons
In Navigation mode, ROAD ANGEL Navigator 9000 displays various buttons in the lower
corners of the screen:
Tap on the Back button to return to the previous screen. If
you are in the Browse mode, tap on the Back button to return
to Tracking mode. Continue to tap on the Back button to
return to the Navigation menu.
Tap on the Menu button to display commands relevant to the
current screen. In Browse mode, the commands allow you to
enter your destination and create a route (this is described
fully in the Destinations and Routes section on page 25).
Tap on the Tick button to confirm a selection. For example: to
change a map setting (see page 53).
Tap on the Search button to identify a location based on your
selection. For example: to search for a destination close to a
specified postcode (see page 27).
Tap on the Forward button to continue with a procedure. For
example, creating a route with multiple stops (see page 44).
19
Changing back to ROAD ANGEL mode
If you don't want to use the navigation features now, and want to return to full screen
ROAD ANGEL mode:
Tap on the Trip Information panel (if displayed – see page 45), or
Tap on the Back button until the Navigation menu is displayed. Then, tap on the
Device Menu button.
The Device menu is displayed:
Tap on the RoadAngel button to return to the full-screen ROAD ANGEL mode:
The screen also offers the following options:
Store location Add your current position to your unit’s hazard database (see page
67). This button is not displayed if your vehicle is at rest or travelling
at less than 4mph.
Menu Access the hazard and device settings (see page 58) or use your
unit’s media or remote options (see page 71).
Navigation Return to the Navigation mode main menu.
20
5. Hazard Warnings
Your ROAD ANGEL Navigator 9000 alerts you to:
Fixed, temporary or average camera locations
Mobile safety van locations
Hazard locations: accident black spots, schools, congestion zones or ungated
railway crossings.
Traffic incidents
Weather hazards
Speech warnings will tell you the type of hazard followed by an audible tone that
increases with your proximity to the location.
A proximity-to-hazard gauge increases from 1 to 5 bars as you get closer to the danger
zone. If it is a fixed, temporary or average speed camera location, the unit alerts you to
the advisory speed limit.
USE THE ADVISORY SPEED LIMIT FOR GUIDANCE ONLY.
Any road speed limit can change without prior notice or consultation, for
example, in temporary road works. It remains important for drivers to
constantly re-evaluate and be aware of the road limit at all times. Speed
limits may vary according to vehicle type and class.
All Road Angel products are designed to provide the driver with a high
visibility speedometer reading within your field of vision. Although GPS
speedometers are known to be highly accurate at steady speed,
atmospheric conditions and hindered skyward visibility (e.g. tunnels) can
adversely affect accuracy. In all situations, drivers should always refer to
the vehicle’s speedometer, which is known to fall within approved
guidelines of accuracy in all situations, and be aware of the applicable
speed limit.
You can customize the way your ROAD ANGEL Navigator 9000 alerts you to road
dangers: see Hazard and Device Settings on page 58.
21
Hazard icon
Personal icon*
Advisory speed
limit
Audio On/Off
icon
Dismiss/
Delete button
Proximity-tohazard meter
Hazard type
icon*
Actual
speed
Advisory
speed limit
Hazard
warning
message
Camera Locations
If you are approaching a fixed, temporary or average speed camera location and travelling
below the advisory speed limit, the alert message is shown on a green background. If you
are travelling above the advisory limit the background is red. If your speed subsequently
drops below the advisory speed limit, the background changes to green.
Safety camera alerts in ROAD ANGEL mode and Navigation mode are shown below:
* A circled ‘P’ on the hazard icon indicates that you have created this location.
Hazard type
Actual speed
Proximity-tohazard meter
22
Camera Van Locations
“Live” mobile camera van locations (where a mobile camera van has been reported to be
present within the last two hours) are indicated by a red background.
Road Angel mode Navigation mode
On other occasions, the location is shown with an orange background:
Road Angel mode Navigation mode
If you pass a safety van location where a mobile camera van is present, tap on the Set
Live button. Your unit will send a message to update the camera database. Other ROAD
ANGEL Navigator 9000 users approaching this location in the next two hours will then
receive a Live Van Alert.
23
Traffic Alerts
In full-screen ROAD ANGEL mode or when you are driving in Navigation mode without a
programmed destination, your unit will provide traffic alerts if you are driving towards a
traffic incident. You are only alerted to incidents close to your current heading.
Traffic alerts in ROAD ANGEL mode and Navigation mode
For more information about traffic alerts, see page 84.
If you are driving in Navigation mode with a programmed destination, your ROAD
ANGEL Navigator 9000 will alert you to any incidents that have occurred on your route.
Depending on how you have set up your unit, this information can be used to optimise
your route and avoid traffic congestion, roadworks and accidents (see page 57).
You can view traffic reports from any map screen: tap on the Menu button and then tap
on the Traffic Info button (see page 47).
24
Other Hazards
If you are approaching any other type of hazard, no advisory speed limit is shown. The
background is blue for an accident black spot, congestion zone or primary school
hazard.
Road Angel mode Navigation mode
Acting on an Alert
To mute an audio alert, tap on the Hazard-Type icon.
To dismiss the alert, or remove it from the unit’s database, tap on the
Dismiss/Delete icon (see page 66). In ROAD ANGEL mode, tap anywhere on
the screen.
25
6. Destinations and Routes
ROAD ANGEL Navigator 9000 knows where you are from its GPS data; to calculate your
route, it only needs you to specify the destination (see page 26). It can then use its map
data and your preferences to calculate the most efficient route for your journey. For more
complicated journeys, you can specify multiple destinations (see page 39). ROAD
ANGEL Navigator 9000 works out the best route between each stop.
If you encounter any traffic problems on your journey, ROAD ANGEL Navigator 9000
can calculate a detour for you (see page 48).
From full-screen Road Angel mode or from the Device menu, tap on the Navigation
button. The Navigation main menu is displayed:
This offers you a number of different ways to specify the destination:
Address Enter a new address (see page 26).
Favourites Select a bookmarked or recent destination (see page 33)
POI Search Search for a Point of Interest (see page 30).
Map View the map (see pages 16 and 39).
Recent Select your destination from a list of recently visited
locations (see page 35).
You can also tap on the Device Menu button to return to the Road Angel mode or the
Settings button to modify the way that your ROAD ANGEL Navigator 9000 works (see
page 52).
26
Entering an Address
1. Tap on the Address button to identify your destination by its postal address or
postcode. The Find Address window is displayed.
2. Tap on Country. Select your country from the list.
This step is only necessary for the first address you enter on the unit.
There are two ways you can specify your destination:
The best way is to enter the postcode (see page 27).
If you don’t know the postcode, you can enter the name of the town or city
and, optionally, the street and house number (see page 28).
27
If you know the postcode
1. Tap on the Post Code button and enter the post code of your destination.
2. After the first few characters, you may tap on the search symbol (the magnifying
glass) to display a hit list of post codes matching your entry.
3. Choose the appropriate post code from the list.
4. Tap on the menu button in the lower right corner.
Go to the Fine Tuning section (see page 29).
28
If you don’t know the postcode
1. Tap on the City button. Use the displayed keypad to enter the name of your
destination. Enter at least the first three characters and then tap on the search
symbol (the magnifying glass).
2. Find your target city or town in the ‘hit’ list and tap on its name.
3. Tap on Street to enter the name of the street.
29
4. Type the name of the street you are looking for. After the first few characters, you
may tap on the search symbol (magnifying glass) to display a hit list of streets
matching your entry. Choose the appropriate street from the hit list.
5. Optionally, enter the number of the property.
6. Tap on the menu button to continue.
Fine-tuning
1. When you tap on the menu button after entering an address, ROAD ANGEL
Navigator 9000 displays the following screen:
2. To start driving to your destination, tap on the Navigate button. ROAD ANGEL
Navigator 9000 calculates a route to your destination and displays your first route
instruction (see page 45).
The screen also offers the following options:
Via Enter further stops on your journey (see page 39).
Save Store the destination in the bookmark list (see page 34).
On Map Use an on-screen map display to identify your destination
more accurately (see page 38).
Back Return to the Find Address screen.
30
Points of Interest (POI)
ROAD ANGEL Navigator 9000 contains a database of information about amenities and
attractions. These are collectively called Points of Interest (POI). You can use this
feature to identify destinations. For example, you could use the POI database to find the
nearest garage or identify a restaurant close to your route.
POIs are arranged in the following categories:
Automotive
e.g. Picnic Sites, Car Parks, Garages
Overnight
e.g. Campsites, Hotels
Eat drink
e.g. Restaurants, Coffee Shops
Sights
e.g. Museums and Galleries, Tourist Attractions
Shopping
e.g. Florists, Groceries, Childrens, Sports and Outdoors, Home&Garden
Leisure
e.g. Cinemas, Golf Clubs, Zoos
Service
e.g. Educational Facilities, Hospitals
Transport
e.g. Airports, Railway Stations
31
Getting to a POI
1. On the Find Destination screen (see page 23), tap on the POI button. The POI
Search screen is displayed:
ROAD ANGEL Navigator 9000 will search for a POI close to your current
location. Tap on the Where? button to identify another location for the
search (see page 26).
2. Tap on a POI category, for example: Automotive.
3. On the next menu, choose a subcategory, for example: Gas Stations.
32
4. A list of the POIs in the category is shown (in this example, gas stations) with their
distance from your current location.
5. Select a POI by tapping on it. The following menu is displayed:
6. To start driving to the POI, tap on the Navigate button. ROAD ANGEL Navigator
9000 calculates a route to your destination and displays your first route instruction
(see page 45). The screen also offers the following options:
Via Enter further stops on your journey (see page 39).
Save Store the destination in the bookmark list (see page 34).
On Map Display an on-screen map showing the POI (see page 38).
Description View details about the selected POI.
33
Favourites Options
If you want to go to your designated home or work locations (see below), or choose a
bookmarked destination, a recently visited location, or make a pre-planned trip, tap on
the Favourites button. The following menu buttons are displayed:
There are four types of locations in the Favourites menu:
Bookmarks Single-stop destinations you have saved through ROAD ANGEL
Navigator 9000’s menus (see page 34).
Recent Destinations you have recently visited (see page 35).
Trips Pre-planned journeys with two or more stops that you have saved
to your trips list (see page 36).
Presets Your Home and Work destinations available for easy selection (see
page 37).
34
Bookmarks
Tap on the Bookmarks button. A list of saved destinations is displayed.
Select an item by tapping on it. The following menu is then displayed:
Tap on the Navigate button to follow a route to the chosen bookmark. Now refer to the
Getting There section (see page 45).
35
The menu also offers the following options:
Via Enter the chosen bookmark as a stop in the destination list (see
page 34).
Sort Order the bookmark destination list alphabetically.
On map View the location of the bookmark on an on-screen map.
Rename Change the name of the selected bookmark.
Delete Delete the selected bookmark.
Delete all Clear the bookmark list.
Recent
Tap on the Recent button to choose your destination from a list of your recently visited
destinations:
Select an item by tapping on it.
Tap on the Navigate button to follow a route to the chosen destination. Other menu
options are as described in the Bookmarks section on the previous page.
36
Trips
Tap on the Trips button to choose your destination from a list of your pre-saved trips (a
“trip” consists of two or more stops):
Tap on Create a new trip to define the stopovers for a new trip.
Select an existing trip by tapping on it. The following menu is then displayed:
Tap on the Navigate button to follow a route to the stops defined in the trip. Now refer to
the Getting There section (see page 45).
37
The menu also offers the following options:
Edit stopovers Modify the selected trip (see page 41).
Sort Order the bookmark destination list alphabetically.
Rename Change the name of the selected trip.
Delete Delete the selected trip.
Delete all Clear the trip list.
Presets
The Presets list features Home and Work buttons. These provide shortcuts to your most
commonly used destinations.
Setting up Home/Work buttons for the first time
To assign a destination to one of these buttons, tap on it. You can choose the destination
in three ways:
By searching for an address in the way described on page 26.
By selecting your current GPS position.
By choosing a recently visited location.
38
Using My Work/My Home
After you have followed the setup procedure described above, the next time you want to
travel to home or work:
1. Tap on the Presets button (see page 23).
2. Tap on the Home or Work entry in the Presets list. The following menu buttons are
displayed:
Tap on the Navigate button to follow a route to the chosen preset. Now refer to the
Getting There section (see page 45).
The menu also offers the following options:
Via Enter the chosen preset as a stop in the destination list (see page
41).
On map View the location of the preset on an on-screen map.
Delete selected Delete the selected preset.
Rename Change the name of the selected preset.
Delete all Clear the preset list.
39
Using the Map
You can also select your destination from the map while ROAD ANGEL Navigator 9000
is in its Browse mode (see page 17).
1. Display your destination on the map.
2. Tap on the precise location.
3. Tap on the Menu button.
4. Tap on the Navigate button to follow a route to the location. Now refer to the
Getting There section (see page 45).
40
The menu also offers the following options:
Via Enter the chosen location as a stop in the destination list (see page
41).
Save Save the location in the bookmark list (see page 34).
Search Search for POIs close to the location.
Map options Change the way your ROAD ANGEL Navigator 9000 displays
maps.
41
Planning your Route
In most cases, you will enter a single destination and allow ROAD ANGEL Navigator
9000 to determine your route and guide you there. However, if you want to stop at one or
more places on the way, you can enter more destinations into your itinerary as stops and
let ROAD ANGEL Navigator 9000 calculate the best route to get you from one stop to
the next.
This section describes ROAD ANGEL Navigator 9000’s route planning feature. This
allows you to plan your route in advance, choosing multiple stopovers along your
journey. To plan your route:
1. Identify the location for your destination or stop as described in the previous
sections.
2. Tap on the Via button to add the location to your destination list:
42
3. To add a stopover, tap on the + symbol. The Choose stopover screen is
displayed.
4. Enter a stop using one of the procedures described in the last section: a home or
work address, a bookmark, a point of interest, a recent location, an address or a
destination pinpointed on the map.
5. Repeat the procedure to add further stops.
6. To change the order of the stopovers, select one and then use the up and down
arrows to move it up or down the list.
7. To delete a stopover, select it and then tap on the ‘Bin’ symbol.
43
8. When you have completed your route, tap on the menu symbol (bottom right-hand
corner of the screen).
9. Choose from the following options:
Tap on the Back button to return to the Choose Stopover screen.
Tap on Start Navi to start your journey (see page 45).
Tap on Simulate to view a simulation of the journey.
Tap on the Save button to add the itinerary to your Trip list.
Tap on Routing if you want ROAD ANGEL Navigator 9000 to calculate the
itinerary for your route. The Route Summary is displayed (see below).
44
Routing and Waylists
Tap on one of the stopovers in the Route Summary to display a detailed itinerary in the
Waylist (this may take a while). This is a complete list of all the instructions for the route.
Tap on the Forward button to step through the list, page by page.
If you want to avoid a particular road or junction, tap on the relevant waypoint and
confirm that your want to delete it. Your ROAD ANGEL Navigator 9000 will calculate an
alternative route (see page 48).
45
7. Getting There
When you have specified your route, and tapped on the Navigation button, ROAD
ANGEL Navigator 9000 switches to the full screen Guidance mode. It gives you a view of
the whole route and then provides you with on-screen and audio directions to get you to
your destination(s).
The Trip information panel on the left side of the screen displays your speed, the current
time, estimated time of arrival and the distance to your destination.
Tap on the + and – icons to increase or decrease the map magnification. Tap anywhere
else on the screen to browse across the map, away from your route. Tap on the Back
button to return to the Tracking mode.
Current
position
shown by
green arrow
3D map view
(see page 43)
Distance to next turn
Trip
information
panel
Route (shown in b
lue)
Name of next road
46
If you want to cancel the route guidance instructions, click on the Back
button (from Tracking mode). The ROAD ANGEL Navigator 9000 will
prompt you to confirm that you want to stop the route instructions. Tap on the Yes button
to return to the Navigation menu or the No button to resume route instructions. If you
cancel the instructions, you could use the Tracking mode (click on the Map button) or
full-screen ROAD ANGEL mode (click on the Device Menu button) to monitor your
progress and to continue with hazard alerts and traffic information.
Tap on the menu button to view the Guidance menu (see Changing a
Route on the next page) and commands to modify your route.
Tap on the Trip Information panel to display the Device Menu (see page 19).
This allows you to change to full-screen ROAD ANGEL mode, change alert
settings or add your present location as a hazard zone.
47
Changing a Route
There are various ways you can change the route recommended by your ROAD ANGEL
Navigator 9000:
Let the ROAD ANGEL Navigator 9000 calculate an alternative route close to
your current position.
Remove one or more entries from your route itinerary. Your ROAD ANGEL
Navigator 9000 picks a new route avoiding these roads or junctions.
Use the Traffic Rerouting option (see page 57 to automatically calculate new
routes avoiding traffic jams (see page 51).
Alternatively, you could programme the unit with a new route or create a detour
using one or more additional stops (see page 39).
To change a route, the audio volume or any other settings from Guidance mode, tap on
the Menu button. The Guidance menu is displayed:
48
The Guidance menu has several options:
Alt. route Make a detour in the immediate area (see below).
Waylist View and modify the route itinerary (see page 49).
Save Store your location as a bookmark (see page 34).
Volume Change the sound output level of the unit.
Traffic Info View the latest traffic reports (see page 50).
Search Select, and navigate to, a POI close to your route. Tap on the
Search button to open the POI menu (see page 31).
Making a Detour
To request a new route:
1. Tap on the Alt. route button. The Detour menu is displayed:
2. You can block the original calculated route for a given distance (e. g. 0.5 mile) and
force an alternative route. Tap on the required distance icon. Your journey is
reassessed and, if an alternative route is available, the previous instructions will be
discarded for the given distance.
49
Editing the Waylist
View the full itinerary of your route. You can adjust your route by removing
1. Tap on the Waylist button. Your current itinerary is displayed.
2. Identify and tap on the section of the route that you want to avoid.
3. Confirm that you want to remove the waypoint.
If the section of road is an integral part of the route or if there is no viable alternative,
your ROAD ANGEL Navigator 9000 will retain the waypoint and inform you of the
problem. Otherwise, it calculates a new route avoiding the section of road you have
identified.
50
Traffic Reports
To view traffic reports, tap on the Menu button when in Navigation mode.
Tap on the Traffic Info button. The Traffic Information screen is displayed:
You can adjust the list to show all available traffic information or just incidents affecting
your route. Tap on the Menu button and then choose from the On route or All events
options.
51
Traffic Rerouting
If you have set Traffic Rerouting to the Automatic option (see page 57), your unit will
immediately calculate a new route to avoid a traffic incident, if one is available, displaying
the following confirmation that your route has changed:
If you have set Traffic Rerouting to the Manualoption (see page 57), your ROAD ANGEL
Navigator 9000 displays the following screen if it has received information about an
incident affecting your route and can offer an alternative to avoid it:
Choose whether to accept the detour or continue with the original route.
52
8. Navigation Settings
On the Navigation main menu, tap on the Settings button if you want to change the
volume of audio alerts and announcements or change any other settings. The following
menu is shown:
This provides the following options:
General Settings Change the language, time and view version information (see page
57).
Map Settings Adjust the way maps are displayed (see page 53).
Route Settings Change guidance and route-finding options (see page 55).
Volume Change the sound output level of the unit.
Many of these settings are also available on other menus.
53
Map Settings
Tap on the Map Settings button to change the appearance and style of screen maps.
The Settings menu is displayed:
Use this menu to:
Info Layers Change the information displayed on the map (see Info Layers
below).
Day/Night/ Toggle between night and day modes.
Automatic In the Automatic mode, ROAD ANGEL Navigator 9000 changes
between day and night modes at 07.00 and 19.00.
Maps Select map data (UK supplied - for other options, please contact
Road Angel Group Ltd).
2D/3D Toggle between 2D and 3D map modes
Track Up/Down Change the compass tracking used by ROAD ANGEL Navigator
9000. The two options are to automatically rotate the map display
so that your current heading is always up the screen or to lock the
map display so that it always faces north.
54
About Info Layers
The elements and symbols displayed on the maps are determined by information layers.
Select the boxes of any POI category (see page 30) you want to have displayed on
the map. Deselect those that should be hidden.
Press the confirmation symbol in the bottom right-hand corner to select/deselect all
categories.
Tap the back arrow symbol to return to the map.
55
Route Settings
Tap on the Route Settings button if you want to change the way ROAD ANGEL
Navigator 9000 calculates routes. The Route Settings menu is displayed:
Fast/Slow/Bike/ ROAD ANGEL Navigator 9000 uses this setting to calculate
Motorbike/ the best route and estimate your journey time. By
Scooter/Van/ default, ROAD ANGEL Navigator 9000 assumes you are
Pedestrian travelling by car. Tap on this button to specify your mode of
transport: fast car, slow car, motorbike, etc. See note below about
suitability for various vehicle types.
Fastest/Shortest Tap on this button to choose whether ROAD ANGEL Navigator
9000 selects the fastest (based on road quality, terrain and speed
restrictions) or the shortest route (based on the shortest distance
on good roads)
Toll Roads Tap on this button if you want ROAD ANGEL Navigator 9000 to
avoid toll roads when it calculates a route. Tap on the button again
to restore the use of toll roads.
The London Congestion Zone in Central London is regarded as a
toll road: if you choose to avoid toll roads, you will not be guided
through this zone.
56
Motorways Tap on this button if you want ROAD ANGEL Navigator 9000 to
avoid motorways when it calculates a route. Tap on the button
again to restore the use of motorways.
Ferries Tap on this button if you want ROAD ANGEL Navigator 9000 to
avoid the use of ferries when it calculates a route. Tap on the
button again to restore the use of ferries.
It is worth noting that with the vehicles listed above, advisory speed limits
may change based on the type and weight class of that vehicle. Road Angel
alerts have been designed for the passenger car market and as such
advisory speed limits are set accordingly. These limits are only advisory
and in all situations, the responsibility remains with the driver to drive
within the limits and conditions for the road and the vehicle.
Road Angel would also like to note that the routing utilised in this product
is not in some cases suitable for Heavy Goods Vehicles. For these specific
applications, products designed to take account of increased weight, height
and length should be sought. In limited cases, drivers towing large trailers/
caravans should also take into consideration these factors prior to travel.
57
General Settings
Tap on the General Options button if you want to change the way ROAD ANGEL
Navigator 9000 uses traffic information or displays text, time and distances. The General
Options menu is displayed:
Choose from the following options:
Automatic/ Set up the Traffic Rerouting feature.
Manual/Off With the Automatic option (this is the default setting), your ROAD
ANGEL Navigator 9000 will automatically adjust your route to avoid
traffic jams; with the Manual option it will first alert you to an
incident and prompt you to choose between the existing route and
an alternative route avoiding the traffic jam.
Language Choose the language used on menu buttons and other screens.
Miles/Kilometres Tap on this button to change the distance units used on-screen
between miles and kilometres.
Set time Select your time zone.
Tap on the ‘tick’ button to confirm any changes and return to the previous screen. Tap on
the Back button to return to the previous screen and discard any changes to these
settings.
58
9. Hazard and Device Settings
This section describes how you can use the main menu to:
Change the way that ROAD ANGEL Navigator 9000 alerts you to road hazards.
Adjust unit settings such as the screen brightness, power saving settings, and
stylus calibration, or view RescueLoc information.
View text messages and weather reports.
To access these settings:
In Navigation mode:
o Tap on the Trip Info panel (if shown – see page 45), or
o Tap on the Back button until the Navigation menu is displayed. Tap on the
Device Menu button and then the Menu button.
In Road Angel mode, tap on the Menu button. The main menu is displayed:
59
Hazard Settings
To change the Hazard Alert settings, tap on the RoadAngel button:
The menu offers the following options:
Audio Change the way ROAD ANGEL Navigator 9000 uses audio alerts
(see Audio on page 60).
Distances Adjust the distance from a hazard that your ROAD ANGEL
Navigator 9000 starts an alert, and enable or disable speed
sensitivity (see page 62).
Alerts Choose the active hazards alerts (see page 63).
Reset Restore the factory default values for Audio, Distances and Alerts
settings.
Tap on the Back button to return to the ROAD ANGEL main menu.
The following sections list the properties in each category.
60
Audio
Settings in the Audio menu determine how ROAD ANGEL Navigator 9000 uses audio
alerts to warn you about road hazards.
61
Property Details
Options
(factory setting in bold)
Camera Alert Volume
Change the sound level of safety
camera related warnings.
Off…1…2…3…4…5
Safety Alert Volume
Change the sound level for Blackspot,
School and Congestion related
warnings.
Off…1…2…3…4…5
Slowspeed Automute
Mutes audible warning if you are
travelling less than 15MPH.
Off…On
Female or Male Voice
Choose whether alerts are spoken
with a male or female voice.
Female…Male
Camera Alert Single Beep
Switch alert on or off, as each
proximity bar counts up it will emit a
single beep. In Auto, single beep if
speed is below advisory limit.
Off…On…Auto
Safety Alert Single Beep
Switch alert on or off, as each
proximity bar counts up it will emit a
single beep.
Off…On
Speed Sensitive Volume
Adjust the warning volumes
depending on how fast the vehicle
is travelling.
Off…On
Voice Alerts
Switch voice alerts on or off. Off…On
62
Distances
A Camera Van alert occurs when you are 500m from its location; a School or Congestion
zone alert occurs at a distance of 125m. These alert distances are fixed. For other types
of hazards, the factory setting for the alert distance is 250m. You can change this
warning distance to 500m or 1000m, if you prefer. You can also choose to double the
warning distance when you are travelling over 50mph using the Speed Distance
Sensitivity setting.
Property Details
Options
(factory setting
shown in bold)
Alert distance
Adjusts the warning distance as you
approach danger zones (not
Congestion Zone, School or Camera
Van locations – see above).
250..500..1000m
Speed distance
sensitivity
Doubles the alert distance at 50MPH
and above (no effect on School,
Congestion or Camera Van alerts)
Off...On
63
Alerts
Your ROAD ANGEL Navigator 9000
will always warn you about Fixed,
Average and Mobile Safety Camera
zones. However, you can choose
whether to receive alerts about other
hazards using settings on the Alerts
menu.
Property Details
Options
(factory setting in bold)
Blackspot Alert
Switch Blackspot alerts on or off. Off...On
Safety van Alert
Switch camera van alerts on or off. Off...On
Congestion Alert
Switch Congestion Charging zone entry warnings
on or off.
Off...On
Overspeed Alert
Set a speed at which the unit will warn if you
exceed the speed.
Off..20 - 165
in increments of 5mph
School Alert
Switch School alerts on (only effective 8-9.30am
and 1.30-4.30pm Mon-Fri) or off.
Off...On
Railway Alert
Alerts you to railway crossings with no barrier. Off...On
Rest Alert
Select this option if you want to be alerted
whenever you have been driving for two hours
without a break.
Off...On
Traffic Alerts
Switch Traffic Alerts on or off Off...On
64
Device Settings
From the ROAD ANGEL main menu, tap on the Device button.
The Device menu has three options:
Rescueloc Shows your latitude, longitude and last heading.
Display Allows you to adjust the screen brightness, power saving options
and display mode, and calibrate the stylus (see page 65).
Version Information about
your unit’s software
and memory
utilization, the date
the unit was most
recently updated
and the current
subscription
coverage.
65
Display Settings
Using this menu, you can adjust the screen brightness, power saving options and display
mode, and calibrate the stylus.
Property Details
Options
(factory setting
shown in bold)
Backlight level
Change the intensity of the screen display. Off…1…2…3…4…5
Battery Backlight
Timeout
Switch the unit off if it is not used for the
specified time period when using battery power.
Off…30s…1m…3m…5m…10m
Ext Power Backlight
Timeout
Switch unit off if not used for the specified time
period when using an external power supply.
Off…30s…1m…3m…5m…10m
Stylus Calibration
Commence the stylus calibration procedure –
follow the on-screen instructions.
Day or night mode
Select a day or night mode colour scheme. Day…Night
66
10. Adding and Deleting Danger Zones
Road Angel Group Ltd. is constantly updating the central database of danger zones. You
can be of great value to all ROAD ANGEL Navigator 9000 users by adding any new
zones you encounter to your unit's own database. When your ROAD ANGEL Navigator
9000 is updated, this data can be verified by Road Angel Group Ltd before being added
to the central file.
PLEASE ONLY ADD OR DELETE DANGER ZONES WHEN IT IS SAFE
TO DO SO.
Deleting zones
When your ROAD ANGEL Navigator
9000 alerts you to a danger zone, you
can delete it from your unit’s database
so that you will not be warned about it in
future. This will only affect your unit’s
personal database.
In Navigation mode, tap on the
Dismiss/Delete button; in Road Angel
mode, tap anywhere on the screen (see
page 24). This menu is then displayed:
Tap on the Delete button to confirm the permanent deletion of the location or tap on the
Dismiss button to stop the alert on this occasion but leave it in the database.
When a location has been deleted it can only be restored by re-entering the
location (see Adding new locations, below) or by requesting a factory reset for
your next update: email support@roadangelgroup.com with your serial number
and contact details. Note: By using a factory reset all your personally
stored locations will be lost.
67
Adding new locations
You may add new locations to the FIXED, MOBILE VAN, AVERAGE, MOBILE,
BLACKSPOT, SCHOOL and RAILWAY categories of your unit’s own database. When
you update your ROAD ANGEL Navigator 9000, these new locations will also be
downloaded to the central database, and can then be verified by Road Angel Group Ltd
technicians for inclusion in future updates.
ROAD ANGEL Navigator 9000 needs to be travelling in excess of 4 MPH to
calculate the heading for the location.
Store an average speed monitoring area only if you are absolutely sure of the
start and finish points.
When your vehicle is precisely alongside the new location:
1. In full-screen Road Angel mode (see page 13), tap on the Store location button.
In Navigation mode, tap on the Trip info panel or return to the main menu and tap
on the Device Menu button, then tap on the Store location button (see page 19).
2. Choose the type of zone:
68
3. Identify the speed limit for the zone (camera locations only):
Use the + and – buttons to adjust the displayed advisory speed limit for the new
zone. Click on the ‘tick’ button to continue.
4. If you are adding an Average Speed monitoring section (SPECS zone), press the
STORE button again when you are underneath the finish camera. ROAD ANGEL
Navigator 9000 prompts you to confirm the end of the zone.
5. ROAD ANGEL Navigator 9000 confirms that the zone has been saved and returns
to the original display mode.
69
11. Updating the Database
Your ROAD ANGEL Navigator 9000 has a comprehensive database of danger zones
(see page 78). As soon as possible after your purchase, you should register the unit
online at www.roadangelgroup.com (see page 8). The next day, your unit will be able to
receive updates, although you must also have a valid subscription (see page 4).
Your unit receives updates automatically by GPRS, the wireless data service available
over the GSM network. If you live in an area with low GPRS coverage and cannot
receive automatic updates, you can also update your ROAD ANGEL Navigator 9000
manually over the Internet using your PC. In this case, we recommend that you update
your ROAD ANGEL Navigator 9000 fortnightly, as safety camera locations are constantly
changing. If you are a high mileage motorist, using unfamiliar roads, you may want to
update your database weekly. You should also update the database before you set off
on a long trip.
You can check the date of your last update on the Information page (see page 64).
70
Updating by PC/ActiveSync
To update your ROAD ANGEL Navigator 9000 using your PC, you will need:
A PC with internet access running Microsoft Windows 2000 or XP (we do not support
Apple Macs)
Internet Explorer version 5.5 or above
Microsoft ActiveSync 3.8 or above
To set up your ROAD ANGEL Navigator 9000 with ActiveSync:
1. Switch on your ROAD ANGEL Navigator 9000 (if the internal battery is flat, you will
need to connect it to the PC first) and wait for it to boot up.
2. Connect your ROAD ANGEL Navigator 9000 to your PC (with an active Internet
connection) using the USB cable.
3. Microsoft ActiveSync starts; when it prompts you to set up a partnership, select the
No option and then click on the Next button. The ActiveSync window displays
Guest: 'Connected’.
4. The unit should update within 5 minutes of a connection being established. If you
have any problems, check that your firewall or Internet Security software allows the
unit access to the Internet. Please refer to your firewall’s documentation.
71
12. Media and Remote Options
In addition to the navigation and hazard warning system, you can also use your ROAD
ANGEL Navigator 9000 to:
Play music, browse photos and watch videos on this unit.
Receive text messages and access weather forecasts.
To close ROAD ANGEL Navigator 9000, and access the unit’s media options:
From Navigation mode, tap on the Device Menu button on the Navigation menu
screen (see page 15). Tap on the Menu button.
From ROAD ANGEL mode, tap on the Menu button.
The main menu is displayed:
The following commands are available:
Navigation Return to Navigation mode.
Remote Access text messages or weather reports (see page 75).
Device Change the appearance and operation of the unit (see page 64).
RoadAngel Customize road hazards warnings (see page 59).
Media Play MP3 files, view photos or videos (see page 72).
72
Media Options
Tap on the Media icon. The Media screen is displayed:
Choose from the three media options: Music, Picture or Movie.
Music
Tap on the Music button. The MP3 Player is displayed. This lists the MP3 files stored in
the “Music” folder on the unit’s SD memory card.
Use the on-screen controls to select and play MP3 files.
73
Photos
Tap on the Picture button. The image viewer is displayed. This allows you to browse
image files stored on the SD memory card.
Tap on the Previous and Next buttons to navigate through the images and
folders stored on the SD memory card.
Tap on the Open button to display the selected image or to open a folder.
Tap on the Slideshow button to view a slideshow of all the images in the
selected folder.
Tap on the Up icon to navigate back through the folder structure.
Tap on the Back button to go back to Main Menu.
74
Movie
Tap on the Movie button. The movie viewer is displayed. This allows you to browse
image video files stored on the SD memory card.
Select the required video file and then use the on-screen controls to view it.
Tap on the Back button to close the viewer and return to the Media screen.
75
Remote Options
Tap on the Remote button. The Remote options menu is displayed:
Choose from the two options: Text Messages or Weather.
Text Messages
You can receive and view text messages on your ROAD ANGEL Navigator 9000. It is
also possible to have a destination postcode sent by text directly to your unit. Tap on the
Text Messages button on the Remote menu to view the inbox:
76
To view a message, tap on it and then tap on the View button (you could also double-tap
on the message). The selected message is then displayed.
The unit’s phone number is displayed on the Inbox screen.
To receive a destination postcode by text:
You can receive a destination postcode directly through the text messaging service. The
text message must have the format:
dest [space] [postcode]
(for example: dest nn12 8gx)
When your unit receives the text message, the following screen is displayed:
Tap on the Yes button to accept the postcode as your new destination and abandon any
existing route instructions.
It is also possible to receive a destination postcode through an online portal – see
www.roadangelgroup.com for details.
77
Weather Reports
You can receive and view weather forecasts on your ROAD ANGEL Navigator 9000. Tap
on the Weather button on the Remote menu to view the Weather menu.
1. Select a country:
2. Tap on a region.
If your unit has GPRS connectivity or an ActiveSync connection, the weather forecast for
the chosen area is displayed.
78
13. Background Information
About Global Positioning Satellites (GPS)
Operational since 1990, 24 satellites orbit the earth at a height of 11,000 miles. At any
given point on the globe, at least 4 satellites are in view at any one time. Using
sophisticated aerials and triangulation techniques, units such as ROAD ANGEL
Navigator 9000 are able to compute your position to within 5-10 metres. ROAD ANGEL
Navigator 9000 is equipped with a Sirf3 chipset, which enables fast and deep GPS signal
search capabilities.
Occasionally, when roads are close together, ROAD ANGEL Navigator 9000 may place
you on the wrong road. If this happens, keep driving and the device will automatically
correct itself when it has a better fix or when the road network simplifies.
ROAD ANGEL Navigator 9000 may lose the GPS satellite signal temporarily owing to
tunnels, tall buildings, bridges, dense foliage or adverse weather conditions. When you
are clear of the obstruction, ROAD ANGEL Navigator 9000 should re-acquire satellite
signals in a few seconds.
The ROAD ANGEL Database
ROAD ANGEL Navigator 9000 uses a database of Police, Local Authority and Ministry of
Transport designated danger spots, including accident black spots and safety camera
locations, primary schools and congestion charging zones. Using the latest Global
Positioning Satellite (GPS) technology, ROAD ANGEL Navigator 9000 compares your
position with known danger spot locations and gives you an audible and visual warning
as you approach them.
It is critical to the accurate operation of your ROAD ANGEL Navigator 9000 that you
update your unit regularly to maintain the very latest data. With up to 100 new hazard
locations added each month, we suggest that you update your ROAD ANGEL Navigator
9000 fortnightly. If you are a high mileage driver, using unfamiliar roads, we recommend
weekly updates.
79
To qualify for database updates:
1. Register your ROAD ANGEL Navigator 9000 with Road Angel Group Ltd. You
cannot receive updates until you have registered (see page 8).
2. Purchase a valid subscription package (see page 4).
For information about how to update your ROAD ANGEL Navigator 9000, see page 69.
Using ROAD ANGEL Navigator 9000 Abroad
Your ROAD ANGEL Navigator 9000 is specifically designed for use within its designated
country, as stated on the packaging. It will have limited functionality in other countries
because the appropriate map and camera/safety GPS data will not be present on the
standard SD card. You can purchase SD cards with mapping and camera data for other
European countries: please visit www.roadangelgroup.com for details.
GPRS connectivity cannot be enabled abroad. You will need to update the unit manually
via ActiveSync using an Internet-connected PC.
If you intend to use ROAD ANGEL Navigator 9000 abroad, seek independent legal
advice prior to departure as laws differ between countries on the use of any GPS safety
system.
80
Speed Cameras and Hazards
This section describes the type of cameras and road hazards covered by ROAD ANGEL
Navigator 9000:
Gatso
The most common type of speed camera – used in fixed
positions mounted on poles at the roadside. Measures
vehicle speed using radar and, if the speed limit has been
exceeded, photographs the rear of the vehicle. Uses a
flash unit inside the camera cabinet or mounted on a
gantry to illuminate the offending vehicle's rear number
plate. ROAD ANGEL Navigator 9000 relies on up-to-date
database information for detection.
SPECS
Takes a digital photograph of your vehicle at the ‘start’
point and then another a set distance further down the
road. If your average speed is greater than the speed limit
between these two cameras you are automatically
prosecuted. ROAD ANGEL Navigator 9000 relies on upto-date database information for detection.
Watchman
Measures vehicle speed and, if the speed limit has been
exceeded, takes a photograph of the rear of the vehicle.
Can be accessed remotely allowing operators to
download live video, stored images or data. ROAD
ANGEL Navigator 9000 relies on up-to-date database
information for detection.
81
Speedcurb
Measures the speed of vehicles in the monitored section
of road using pressure sensors in the road surface. If the
speed limit has been exceeded, it takes a photograph of
the rear of the vehicle. Uses a flash module for night-time
operation. ROAD ANGEL Navigator 9000 relies on up-todate database information for detection.
Traffiphot
Uses pressure sensors in the road (similar to
Speedmaster – see below) to measure vehicle speed and
photographs the rear of any speeding vehicle. Not to be
confused with red-light cameras. ROAD ANGEL
Navigator 9000 relies on up-to-date database information
for detection.
Speedmaster
Semi-permanent (fixed location but only used part-time),
system that uses pressure sensors in the road to
measure vehicle speed. Connects to a camera on a tripod
for evidence of any offence. ROAD ANGEL Navigator
9000 relies on up-to-date database information for
detection.
Black spot
A specific location, identified by the police and local
authorities, where a high number of accidents have
occurred e.g. a difficult junction. Black spots are often
targeted by mobile speed enforcement units. ROAD
ANGEL Navigator 9000 relies on up-to-date database
information to identify black spots.
82
Mobile Safety Vans
Operators generally publish the locations where their
mobile safety camera vans will be sited 1-2 weeks in
advance. An updated ROAD ANGEL Navigator 9000 has
the latest mobile safety van information.
Congestion
Drivers must pay in advance or on the day of travel to
enter the designated zone during the scheme’s hours of
operation. There are substantial penalties if you do not
pay the congestion charge.
Primary Schools
You can set up ROAD ANGEL Navigator 9000 to alert
you whenever you are within 250 metres of a primary
school.
Unprotected Railway Crossings
Alerts you to railway crossings with no barrier.
Fatigue Timer Warning
The Highway Code recommends a minimum break of at
least 15 minutes after every two hours of driving. ROAD
ANGEL Navigator 9000 alerts you whenever you have
been driving for two hours without a break.
83
Alert Icons and Audio Text
Safety
Alert Audio Text Icon
CONGESTION ZONE Caution!
Congestion zone ahead
REST Caution!
Rest alert
SCHOOL ZONE Caution!
School zone ahead
BLACKSPOT AHEAD Caution!
Black spot ahead
RAILWAY Caution!
Ungated railway crossing
OVERSPEED
84
Cameras
Alert Audio Text Icon
AVERAGE Warning!
Average speed
monitoring ahead
SAFETY VAN Warning!
Safety camera van /
Warning!
Live safety camera van
LASER Laser!
Laser check speed
FIXED CAMERA Warning!
Fixed Safety Camera
MOBILE Warning!
Mobile camera
Other
Alert Audio Text Icon
NEW TEXT MESSAGE Beep
85
Traffic
Alert Audio Text Icon
CONGESTION AHEAD Alert!
Congestion ahead
MAJOR EVENT AHEAD Alert!
Major event ahead
ALERT Alert!
PROBLEM AHEAD Alert!
Traffic problem ahead
ACCIDENT ZONE Alert!
Accident ahead
ROAD WORKS AHEAD Alert!
Roadworks ahead
WEATHER ZONE Alert!
Weather may affect
road ahead
86
14. Accessories
Please visit the ROAD ANGEL Navigator 9000 online shop at www.roadangelgroup.com
for details.
Road Angel Group Ltd. has made every effort to ensure that all the information
contained in this manual is accurate and reliable. However, the information is
subject to change without notice.
Road Angel Group Ltd assumes no responsibility for any damage or injury
resulting from the use of this product.
87
15. End User License Agreement
Portions of the software are copyright © 1996-2002 The FreeType Project (
www.freetype.org). All rights reserved.
Please read the following agreement (“Licence”) carefully.
Acceptance: Installation or use of the enclosed ROAD ANGEL GROUP LTD software
(the “Software") on your computer constitutes your acceptance of these terms. If you do
not agree to the terms of this Licence, you must immediately delete the Software from
your computer and destroy any copies you made of the Software and of any written
materials relating to the software, and promptly return the Software and, if bought as part
of a package, any associated devices to your retailer for a refund.
Licence: ROAD ANGEL GROUP LTD grants you, as an individual, a licence to install
and use one copy of the Software on a single personal computer and a single PDA
(“personal digital assistant”) at a time. Your licence to use the Software is subject to you
complying with the terms of this Licence. A licence is required for each installation of
the Software, unless the Software is (i) installed temporarily on a computer during the
repair or maintenance of the computer and/or PDA on which the Software is normally
installed and (ii) is immediately deleted from such computer/PDA as soon as those
repairs or maintenance are complete. You may make one copy of the Software for
backup purposes only.
Copyright: United States copyright law and international treaty provisions protect the
Software. You agree that no title to the intellectual property in the Software is transferred
to you. You further acknowledge that title and ownership rights will remain the exclusive
property of ROAD ANGEL GROUP LTD, and you will not acquire any rights to the
Software except as expressly set out in this licence. You agree that any copies of the
Software will contain the same proprietary notices that appear on and in the Software.
Prohibited Use: Unless you have ROAD ANGEL GROUP LTD’s prior written permission,
you may not (i) use, copy, modify, alter, or transfer the Software or accompanying
documentation, except as expressly permitted in this Licence; (ii) translate, disassemble,
decompile, or reverse engineer the Software (iii) sublicense or lease the Software or its
documentation; or (iv) use the Software in a multi-user or networked environment or on a
rental basis or in a time-sharing or computer service business.
88
Limited Warranty: ROAD ANGEL GROUP LTD warrants that the Software will perform
substantially in accordance with the accompanying written materials for a period of 12
months from the date of purchase. Any implied warranties relating to the Software are
limited to 12 months provided that limitation is permitted by applicable law.
End-User Remedies: If the Software does not conform to the “Limited Warranty” above,
ROAD ANGEL GROUP LTD’s entire liability and your sole and exclusive remedy will be,
at ROAD ANGEL GROUP LTD’s option, either to (i) correct the error, or (ii) help you
work around the error, or (iii) accept a return and issue a refund through your retailer.
The Limited Warranty is void if failure of the Software has resulted from your fault,
abuse, or misapplication. If we correct an error in the Software for you, then the
unexpired portion of the Limited Warranty period as at the date you informed us of the
error will apply to the corrected software once you have received the corrected version.
NO OTHER WARRANTIES: EXCEPT AS SET OUT IN THE LIMITED WARRANTY,
ROAD ANGEL GROUP LTD DOES NOT WARRANT THAT THE SOFTWARE IS
ERROR FREE. ROAD ANGEL GROUP LTD DISCLAIMS ALL OTHER WARRANTIES
WITH RESPECT TO THE SOFTWARE, WHETHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD
PARTY RIGHTS. Some jurisdictions do not allow the exclusion of implied warranties or
limits on how long an implied warranty may last, or an exclusion of incidental damages.
This means the above limitations or exclusions may not apply to you. This warranty
gives you specific legal rights and you may also have other rights depending on your
country.
No Liability for indirect loss: In no event will ROAD ANGEL GROUP LTD be liable to
you for any loss of profit, wasted time, lost business or for any incidental, or indirect loss
of any kind arising out of the performance or use of the Software, even if ROAD ANGEL
GROUP LTD has been advised of the possibility of such damages.
Termination: Without prejudice to its other rights, ROAD ANGEL GROUP LTD may
terminate this Licence if you fail to comply with these terms and conditions. In that
situation, you must destroy all copies of the Software.
Choice of Law: This Licence is governed by the laws of England.
Loading...