r.LiNK RL-A15-2 User Manual
r.LiNK-Interface
RL-A15-2
Rear and front camera input
compatible with Mercedes Vito
Audio15 system
Version 15.09.2020 RL-A15-2
Page
1
"
Contents
1. Prior to installation
1.1. Delivery contents
1.2. Check compatibility of vehicle and accessories
1.3. Setting the DIP-switches of the Interface-Box RLC-M40
1.4. Pin-assignments
2. Connection schema
3. Installation
3.1. Interconnecting interface-box, harness and factory navigation monitor
3.2. Connection to rear-view camera
3.2.1. Factory rear-view camera
3.3. Connection to front camera
4. Coding of the camera function
4.1. Camera function coding
4.2. Camera function decoding
5. Front camera activation
6. Specifications
7. Technical support
Legal Information
By law, watching moving pictures while driving is prohibited, the driver must not be
distracted. We do not accept any liability for material damage or personal injury resulting,
directly or indirectly, from installation or operation of this product. This product should only
be used while standing or to display fixed menus or rear-view-camera video when the
vehicle is moving, for example the MP3 menu for DVD upgrades.
Changes/updates of the vehicle’s software can cause malfunctions of the interface. We
offer free software-updates for our interfaces for one year after purchase. To receive a free
update, the interface must be sent in at own cost. Labor cost for and other expenses
involved with the software-updates will not be refunded.
Version 15.09.2020 RL-A15-2
Page
2
"
Take down the SW-version and HW-version of the interface boxes, and store this
manual for support purposes.
Requirements
Vehicle Mercedes Vito (W447)
Navigation Audio15
Limitations
After-market camera Only compatible with NTSC-cameras.
Harness
RLC-A15-2
Interface-box
RLC-M40
HW_____ SW_____
1. Prior to installation
Read the manual prior to installation. Technical knowledge is necessary for installation. The
place of installation must be free of moisture and away from heat sources.
1.1. Delivery contents
1.2. Check compatibility of vehicle and accessories
Version 15.09.2020 RL-A15-2
Page
3
"
Vehicle/ navigation
DIP 1
DIP 2
DIP 3
DIP 4
DIP 5
DIP 6
Camera coding
ON
OFF
OFF
OFF
OFF
ON
Camera decoding
OFF
OFF
OFF
OFF
OFF
ON
1.3. Setting the DIP switches of the interface-box RLC-M40
Note: DIP switch functions of the RLC-M40
DIP 1 – Camera coding
DIP 2 – Front camera activation
DIP 3 – OEM rear-view camera installed
DIP 4 – no function
DIP 5 – no function
DIP 6 – CAN-bus termination resistor on the head-unit side
Version 15.09.2020 RL-A15-2
Loading...