•
Specications
1
2
3
4
5
6
7
8
9
10
11
Remote
Pot
Supply
Remote
Electrical
Supply Voltage: 24 to 240VAC/VDC
Frequency: 50/60Hz
Function: Repeat Cycle
Time Ranges: 0.1Sec. up to 24 Hrs.
Fine Adjustment Pot:
Adjusts within Range
Power Consumption: 1.5VA
Indicators: 2 LEDs
Output Rating @ 25°C:
5 Amps @ 250VAC (General Purpose)
1/8 HP @ 120VAC
5 Amps @ 30VDC
B300 (Pilot Duty)
360 VA
3 Amps @ 120VAC
1.5 Amps @ 240VAC
Ordering Information
TDR - 24/240V - A R 8 -
R-K Model
Voltage
24/240V - 24-240VAC/VDC
Adjustment
A - Adjustable
F - Fixed
R - Remote
X - Special
Function
R - Repeat Cycle
X - Special
Repeat Cycle Timer
Physical
Mounting: Plug-In
Termination: 8 or 11Pin
Packaging: Dust Cover
Weight: 8.5 Oz. Approx.
Ambient Temperatures
Operating: 0°C to 60°C
Storage: -40°C to 85°C
Special
XXXX
Pin Base
8 - 8 Pin Base
11 - 11 Pin Base
TDR-R
• 24 to 240VAC/VDC (Uni-
versal Voltage)
• Repeat Cycle
(First Cycle On)
• Time Ranges Up to 24
Hours
• Adjustment Knobs
• Plug-In Package
• SPDT or DPDT Contacts
• Status LEDs
Listed
42L2
Connections
45
3
2
1
8
Supply
6
7
Operation
When the supply voltage is applied to the
Dimensions
Pot
6
5
1
Supply
11
7
8
9
10
4
3
2
3.6"
.6" 1.8"
2.3"
TDR-R, the rst delay period (off time)
begins. At the end of the Off time period
the internal relay is energized and the
second delay period begins (On time). At
the end of the On time the internal relay
is de-energized. The TDR-R will continue
to cycle the internal delay until the supply
voltage is removed.
Two sets of adjustment knobs are used
to set the Off and On times. Two allow
the operator to select seconds, minutes,
or hours independently for the Off and On
times. The other two knobs allow the operator to select a ne adjustment for each
of the time delays. Removal of supply
power resets the timer.
7/18/14
Txx
Loading...