•
DPT
Digital
P
ercentage Timer
Specifications
Electrical
Supply 'Voltage:
24VAC, 120VAC & 240VAC, 1Ø
Frequency; 50/60Hz
Display: 16 Character, 2 Line, LCD
Back Lighting
Adjustments:
Membrane Buttons & Display
Total Cycle Times: 15 & 30 Min
On Tme Percentages:
5% to 95%, 5% Increments
Manual: On or Off
Running Hours:0 to 99,999 Hrs.
Output Rating @ 25°C:
10 Amps @ 120VAC
6 Amps @ 277VAC
1/8 HP @ 120/277 VAC
5 Amps @ 30 VDC
• Digital Dispaly:
- R
emaining Time
- Time & Percentage
Settings
- Running Hours
- Output Relay Status
• Multiple Mounting
Dimensions
• SPDT Contacts
• Gasketed Cover
DPT - 120A - 15/30 -
Supply Voltage
24A - 24VAC
1
20A - 120VAC
240A - 240VAC
Special
xxxx - Special
The DPT is a Digital PercentageTimer.
Operational information is displayed for
easy viewing: tiime remaining till relay
transfer, relay status, running hours &
set-up parameters.
With the supply voltage active, The DPT
will activate the relay output for the
percentage of time selected in set-up.
For total cycle time, you can select either
15 or 30 minutes. On time can be
selected in 5% increments for 5% to
95%.
Manual selection of either continuous On
or Off is available.
Running hours are accumulated based
on the output relay being energized.
Operation
Physical
Mounting: Panel Mounting
4 - Inserts for 2 mounting dim
Termination: Pluggable Block
Packaging: Gasketed Face
Weight: 1 Pound
Am
bient:Temperatures:
Operating : -20°C to 60°C
Storage: 40°C to 85°C
Dimensions
Connections
Ready to
Submit
Timing
1
5/30 - 15 & 30 Minutes
Gasket
Supply
Voltage
NOCNC
MS
.
.
Supply
Voltage
NOCNC
MS
.
.
Specications
Electrical
Supply Voltage: 24VAC, 120VAC &
240VAC, 1Ø
Frequency: 50/60Hz
Display: 16 Character, 2 Line,
LCD Back Lighting
Adjustments:
Membrane Buttons
Percentage On Time:
5% to 95%, 5% Increments
Manual: On or Off
Total Cycle Times: 1, 15, 30 & 60 Min.
Power-Up Delay: 0 Sec. to 10 Min.,
30 Second Increments
Running Hours: 0 to 99,999 Hrs.
Total Running Hours: 99,999
Interval Running Hours:
99,999, resettable to zero
Ordering Information
DPT - 120A -
R-K Model
Voltage
24A - 24VAC
120A - 120VAC
240A - 240VAC
Dimensions
Time Output
6Min 18Sec ON
Connections
3.88"
0.71"
Special
XXXX
2.9" 2.81"
2"
.88"
Digital Percentage
Timer
Output Rating @ 25°F:
10 Amps @ 120VAC
6 Amps @ 277VAC
1/8 HP @ 120/277VAC
5 Amps @ 24VDC
Physical
Mounting: Panel Mounting
4 - Inserts for 2 Mounting Dim
Termination: Pluggable Block
Packaging: Gasketed Bezel
Weight: 1 Pound
Ambient Temperatures
Operating: -4°F to 140°F
Storage: -40°F to 185°F
Included in the
package are four
hole inserts and four
#8 metal drilling self
tapping screws.
Listed
42L2
READY FOR SUBMITTAL
0.2" Dia.
3.88"
2.5"
2.81"
2.5"
DPT
Time Output
6Min 18Sec ON
• Digital Display
3" Dia.
- Remaining Time
- Cycle Time &
Percentage Settings
- Power-Up Delay
- Interval Hours
- Running Hours
• Multiple Mounting
Dimensions
• SPDT Contacts
• Gasketed Bezel
Operation
The DPT is a Digital Percentage
Timer. Operational information is displayed for easy viewing: time remaining until relay transfer, relay status,
running hours & set-up parameters.
With the supply voltage active, the
DPT will activate the relay output for
the percentage of time selected in
set-up. For total cycle time, you can
select between 1, 15, 30, and 60
minutes. On time can be selected in
5% increments from 5% to 95% or
manual On or Off. There is a re-start
timer selection from 0-10 minutes to
allow for staggered starting of multiple machines.
A running hour meter shows the total
closeure time for the output contacts
since the last reset.
7/29/14
Loading...