Rival S16RW User Manual

Printed in China S16RW/9100120000278

S16RW06EM1

Owner’s Guide

READ AND SAVE THESE INSTRUCTIONS

S16RW

Electric Skillet

SERVICE INSTRUCTIONS

1. Do NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void the Warranty.

2. If you need to exchange the unit, please return it in its original carton, with a sales receipt, to the store where you
purchased it. If you are returning the unit more than 30 days after the date of purchase, please see the enclosed Warranty.

3. If you have any questions or comments regarding this unit’s operation or believe any repair is necessary, please write to our
Consumer Service Department or visit our website at www.rivalproducts.com.

RIVAL
c/o JCS/THG, LLC
CONSUMER SERVICE DEPARTMENT
303 NELSON AVENUE
NEOSHO, MO 64850

ONE (1) YEAR LIMITED WARRANTY

SAVE THIS WARRANTY INFORMATION

A. This Warranty applies only to the original purchaser of this product.
B. This Warranty applies ONLY to repair or replacement of any supplied or manufactured parts of this product that,

upon inspection by JCS/THG, LLC authorized personnel, is shown to have failed in normal use due to defects in
material or workmanship. JCS/THG, LLC will determine whether to repair or replace the unit. This Warranty does
not apply to installation expenses.

C. Operating this unit under conditions other than those recommended or at voltages other than the voltage indi-

cated on the unit, or attempting to service or modify the unit, will render this WARRANTY VOID.

D. Unless otherwise proscribed by law, JCS/THG, LLC shall not be liable for any personal injury, prop-

erty or any incidental or consequential damage of any kind resulting from malfunctions, defects,
misuse, improper installation or alteration of this product.

E. All parts of this product are guaranteed for a period of 1 year as follows:

1. Within the first 30 days from date of purchase, the store from which you purchased your product should
replace this product if it is defective in material or workmanship (provided the store has in-stock replacement.)
If you intend to assert any claim in connection with the product, please follow the instructions in paragraph F.

2. Within the first twelve months from date of purchase, JCS/THG, LLC will repair or replace the product if it is
defective in material or workmanship, subject to the conditions in paragraph G.

F. If you have any other problem or claim in connection with this product, please write to our Consumer Service Department.
G. IMPORTANT RETURN INSTRUCTIONS. Your Warranty depends on your following these instructions if you are

returning the unit to JCS/THG, LLC:

1. Carefully pack the item in its original carton or other suitable box to avoid damage in shipping.

2. Before packing your unit for return, be sure to enclose:
a) Your name, full address with zip code and telephone number,
b) A dated sales receipt or PROOF OF PURCHASE,
c) Your $10.00 (USD) check for return prepaid shipping and handling, and
d) The model number of the unit and the problem you are having. (Enclose in an envelope and tape directly to the

unit before the box is sealed.)

3. JCS/THG, LLC recommends you ship the package U.P.S ground service for tracking purposes.

4. All shipping charges must be prepaid by you.

5. Mark the outside of your package:

RIVAL
c/o JCS/THG, LLC
303 NELSON AVENUE
NEOSHO, MO 64850

SHIPPING AND HANDLING CHARGES: $10.00 (USD)

This Warranty gives you specific legal rights, and you may have other rights which vary by jurisdiction. The provisions of this
Warranty are in addition to, and not a modification of, or subtraction from, the statutory warranties and other rights and
remedies contained in any applicable legislation. To the extent that any provision of this Warranty is inconsistent with any
applicable law, such provision shall be deemed voided or amended, as necessary, to comply with such law.

©

2006 JCS/THG, LLC

Rival

®

and the Rival Logo®are registered trademarks of JCS/THG, LLC.

S16RW06EM1.qxd 6/8/06 9:47 Page 1

-3-

This appliance is for HOUSEHOLD USE ONLY.

No user-serviceable parts inside. Do not attempt to service this product.

A short power-supply cord is provided to reduce the hazards resulting from entan­glement or tripping over a longer cord. AN EXTENSION CORD MAY BE USED

WITH CARE; HOWEVER, THE MARKED ELECTRICAL RATING SHOULD BE
AT LEAST AS GREAT AS THE ELECTRICAL RATING OF THE SKILLET.

The extension cord should not be allowed to drape over the counter or tabletop
where it can be pulled on by children or unintentionally tripped over.

SAVE THESE INSTRUCTIONS

POLARIZED PLUG

This appliance has a polarized plug (one blade is wider

than the other). To reduce the risk of electric shock,

this plug will fit into a polarized outlet only one way.

If the plug does not fit fully into the outlet, reverse the

plug. If it still does not fit, contact a qualified electrician.
Do not attempt to modify the plug in any way. If the plug fits loosely
into the AC outlet or if the AC outlet feels warm do not use that outlet.

16. Oven mitts are required when removing a hot LID or SKILLET PAN or to
remove cooked food from the SKILLET PAN.

IMPORTANT SAFEGUARDS (CONT.)

CAUTION: Some countertops are more sensitive to heat, use care not to place
skillet or SKILLET PAN on surfaces where heat may cause damage.

ELECTRIC POWER: If electric circuit is overloaded with other appliances, skillet
may not operate properly. Skillet must be operated on a separate circuit from
other operating appliances.

-2-

When using electrical appliances, basic safety precautions should always
be followed, including the following:

1. Read all instructions before using.

2. Do not touch hot surfaces. Use handles or knobs.

3. To protect against electrical shock, do not immerse HEATING BASE and cord in
water or other liquids.

4. Close supervision is necessary when any appliance is used near children.This
appliance is not to be used by children.

5. Unplug from outlet when not in use and before cleaning. Allow to cool before
putting on or taking off parts, and before cleaning the appliance.

6. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions or has been damaged in any manner. Call Customer
Service (see warranty) to return for examination, repair, or adjustment.

7. The use of accessory attachments not recommended by manufacturer may
cause injuries.

8. Do not use outdoors.

9. Do not let cord hang over edge of table or counter, or touch heated surfaces.

10. Do not place the assembled appliance or SKILLET PAN on or near a hot gas or
electric burner. Do not place the assembled appliance in a heated oven.
However, the SKILLET PAN without the LID can be removed from the
HEATING BASE and placed in the oven.

11. Extreme caution must be used when moving appliance containing hot oil or
other hot liquids.

12. Do not operate the skillet unless fully assembled. Place SKILLET PAN on
HEATING BASE first, turn TEMPERATURE CONTROL DIAL to “OFF” and then
plug cord into wall outlet.

13. Do not use appliance for other than intended use.

14. To disconnect and prior to removing SKILLET PAN from HEATING BASE, turn
TEMPERATURE CONTROL DIAL to “OFF”, then remove plug from wall outlet.

15. Steam escaping from under the LID or the STEAM VENT is hot. Use caution
when removing the LID.

IMPORTANT SAFEGUARDS

S16RW06EM1.qxd 6/8/06 9:47 Page 2

-5-

5. The STEAM VENT allows steam to escape while cooking with the LID in place.

CAUTION: Escaping steam is HOT! Be careful when removing or lifting LID.
Oven mitts are required when handling the LID or SKILLET PAN.

6. When cooking is complete turn TEMPERATURE CONTROL DIAL to “OFF”.

7. Prior to removing pan from HEATING BASE, turn TEMPERATURE CONTROL
DIAL to "OFF" and remove plug from wall outlet.

8. The SKILLET PAN can be removed from the HEATING BASE and placed in the
oven for baking or roasting. The LID must be removed when using the SKILLET
PAN in the oven.

9. The SKILLET PAN can be used as a serving piece.
When placing the SKILLET PAN on a countertop,
kitchen table or other surface, place a hot plate or
trivet that measures at least

3

/8" high under the
pan to prevent burning or discoloration of the
surface.

HOW TO USE YOUR ELECTRIC SKILLET (CONT.)

Before use, wash the SKILLET PAN and LID in warm soapy water or in the dish­washer and dry completely.

CAUTION: Do not immerse HEATING BASE in water or other liquids.

1. Set the skillet on a flat, dry, heat resistant surface.

2. Make sure that the SKILLET PAN is sitting securely on the HEATING BASE. If the
SKILLET PAN is not secure on the HEATING BASE, the product may not function
properly.

3. Turn TEMPERATURE CONTOL DIAL to "OFF". Plug skillet into standard 120V AC
outlet and turn TEMPERATURE CONTROL DIAL to desired setting, by aligning
the temperature with the POWER INDICATOR LIGHT. The POWER INDICATOR
LIGHT will come on and remain on while the TEMPERATURE CONTROL DIAL is
on the WARM or higher settings. Warm Setting: WARM is recommended for
keeping already hot, fully cooked food at the perfect serving temperature. We
do not recommend using the WARM setting for more than 4 hours.

4. Preheat the skillet with the LID on for 10 -15 minutes.
NOTE: Due to manufacturing process, during initial use of this appliance, some
slight smoke and/or odor may be detected. This is normal with many heating
appliances and will not recur after a few uses.

-4-

HOW TO USE YOUR ELECTRIC SKILLET

KNOW YOUR ELECTRIC SKILLET

Steam Vent

Lid

Skillet Pan

Cool Touch
Handle

Heating Base

Cool Touch
Lid Handle

Cool Touch
Handle

Power Indicator
Light

Temperature
Control Dial

S16RW06EM1.qxd 6/8/06 9:47 Page 4