RIOTEC RIOSCAN Quick Manual

1

RIOSCAN 2D barcode scanner

Quick Guide

Model no.:

iLS6302JS

Introduction

Designed primarily for smartphone, the iLS6302JS is a 2D barcode
scanner that allows you to scan various barcoded items and send data
to smartphone.
Its in-built excellent Motorola SE3300 engine allows you to reliably
read 2D barcodes on various shapes and is a great space-saver for
busy or limited workspaces.
It supports not only iOS devices throug h wireless communication,
but also Android OTG devices through USB cable

Technical data

* Light source………………Aiming LED: 617 nm

dot optical power:0.19mW

Illumination Element: 2x 625 nm LEDs

* Depth of field..............1D (100%UPC-A): 410 mm

2D (15mil PDF417): 360mm

* Best resolution ............1D (4mil) :Code39

2D(6.67mil) :PDF417

* Transmission range.....BT Class 1 (100 m , line of sight)

* Profiles.......................HID & SPP profile 2.4GHz Wir e less

* Memory Capacity.........1MB memory inside

* Input voltage..............5V/DC

* Rechargeable battery...3.7V 900mA Li-Ion battery

* Operating time...........10,000 readings when full charged

* Operating conditions...0℃ to 50℃

* Dimensions................

203 X 60 X 95 mm (for scanner)

* Symbologies:

UPC-A, UPC-E, UPC-E1, EAN-8, EAN-13, Bookland EAN, Code 128,
UCC/EAN-128, ISBT 128, Code 39, Trioptic Code 39, Code 32
Italian Pharma Code), Code 93, Code 11, Interleaved 2 of 5,
Discrete 2 of 5, Chinese 2 of 5, Codabar, MSI, GS1 DataBar, PDF
417, MicroPDF417, Datamatrix, QR Code, Micro QR C ode, Aztec ,
RSS, Composite, TLC-39, MaxiCode, Postal: US PostNet, US Planet,
UK Postal, Australian Postal, Japan Postal, Dutch Postal (KIX)

Delivery content

* Wireless Barcode scanner x 1
* Charging cradle x 1
*

PCB material board+3 screws x 1

* Holder for smartphone x 1
* USB cable x 1
* Quick instruction s x 1

Limited Warranty

Riotec provides a one year limited warranty.
This warranty does not cover any product which has been subject to
improper use, neglect or unauthorized repair or installation.
This warranty does not cover consumable parts. (Cables & batteries are
consumables.)

Safety instructions

Read the operating instructions carefully and especially observe the
safety information. If you do not follow the safety instructions and
information on proper handling in thi s manual, we assume no liability
for any resulting personal injury or damage to property.

* Don’t put scanner in places excessively high temperatures, such as

expose under direct sunlight

* Don’t use scanner in extremely humid area or drastic temperature

change

* The rechargeable battery is permanently built into the product and

cannot be replaced.

* Never damage the rechargeable battery. Damaging the casing of the

rechargeable battery might cause an explos ion or a fire!

Charging:

1. Please switch on and charge scanner for 3~4 hours before first
use as shown on Fig.2

2. When user charge smartphone & scanner, please use
smartphone original USB power adapter.

3. The cradle functions as a charger for the scanner. Even if the
scanner’s battery is full, the cradle will continue to supply power
to the scanner . We suggest removing the scanner from the cradle
when fully charged.

4. When you charge scanner & smartphone, please enter Wired
OTG mode & switch to “C- Charging mode”.

iLS6302JS supports BT communication mode (for iOS & Android
devices) and wired OTG communication mode (for Android OTG
devices)
If you want to switch to another mode, please read the below configuration
code first.

wireless BT communication

wired OTG communication mode
(default)

2

Operating elements

* Please switch ON and charge scanner for 3~4 hours at first

time before use.

How to Connect to Smartphone via BT

1. Make sure the default is BT mode (below right, page #1) & your
device supports BT HID or SPP profile

2. Turn off Power-Saving mode on your smartphone/tablet

3. Then, choose HID or SPP profile and scans the fol low ing 2
settings codes before connecting to smartph one /tablet.
(A1  A2 or B1  B2)
If you don’t know which profile to choose for your device, try HID
first, then, SPP.

HID profile

SPP profile

A1

B1

A2

B2

1. click the “Se ttings”

2. click “General”

3. click “Bluetooth”

4.

Turn it ON, and search the
Devices

5. Select “Rxxxxxx” to connect

6.

When see the “Connected”
means the connection is OK.

(example: pairing with iPhone)

4. Please complete the connection procedures as the above
photos.

5. After the devices are paired, the screen will show
“Connected”. (see step #6 above)

6. Before using WordPad file or appropriate APP, please set
keyboard language of device to US English. Then, scan the
barcodes and the barcode data will show on the cursor side. If
the data cannot be sent to smartphone/tablet, please scan the
“Reset Configuration to Defaults” setting codes (on page #3)..

Notes 1:

* This product complies with Bluetooth standards. This device used

with this product must support the same SPP or HID standard. For
Bluetooth devices with other profiles we cannot guarantee a
connection before the product has been tested.

* The communication speed and range of the product may vary due to

obstacles and radio interference between the product and device.
Condition on the host device may also effect the communication
speed and range of the scanner

Note 2:

* When the battery power is too low, the Orange LED will flash

and beep once. Scanner should be charged immediately. If
scanner shuts down it is recommended to charge it fully then
power it back on.

Trigger / Power ON
Button

(For iOS Device ONLY)
P

ress the trigger for 4~5

seconds to

raise and

lower soft-Keyboard

Exit
Window

Micro USB port (OTG)
U

se Micro USB cable to

connect to smartphone.

Charging
cradle

Indicator
(LED)

Before entering BT mode, you
must

switch to right “C”

(C

harging mode) first.

Then, cradle can supply
power to iOS / Android device
(through micro USB cable) &
scanner simultaneously.

Indicator (LED)
Please check the

“LED

Indicator Information

” on

page #4