RIOTEC iDC9507J, iDC9500, iDC9502A, iDC9507L Quick Manual

Wireless 2D

Pocket barcode scanner

Quick Guide

Model no.: iDC9507J

Introduction

Designed primarily for P.O.S. retail environments, the iDC9507J is a wireless
pocket barcode scanner that allows you to scan various barcoded items.
Its in-built excellent 2D engine allow s yo u to reliably read 1D / 2D barcodes
on various shapes and is a great space-saver for busy or limited workspaces.
It supports iOS, Android, and Windows devices through Bluetoot h HI D or SPP
communication.

Technical data

* Light source………………625 ± 10 nm LED
* Depth of field……….….. 2D (15mils PDF417):265mm
* Scan speed……………….60 frames / second
* Best resolution………….1D (4 mils) – Code 39
* Transmission range……BT Class 1 (100m, line of sight)
* Profiles………….…………HID & SPP profile 2.4GHz Wireless
* Memory Capacity………1MB memory inside

* Input voltage..............5V/DC

* Rechargeable battery…3.7V 900mA Li-Ion battery
* Operating time………….6,000 readings when full charged
* Operating conditions…-0℃ to 50℃
* Dimensions………………100 x 43 x 24.5mm (L x W x H)
* Symbologies:

2D: PDF417, QR code, Data Matrix
1D: Code 128, EAN-13, EAN-8, Code 39, UPC-A, UPC-E, Codabar, GS1 Databar,

Interleaved 2 of 5, UCC/EAN-128, , Code 11, Industrial 2 of 5, Plessey,
MSI-Plessey

Delivery content

* Pocket Barcode scanner x 1
* Mini USB cable x 1 (for charging only)
* Quick instructions x 1
* Strap x 1

Limited Warranty

Riotec provides one year limited w arran ty.
Riotec will not warranty any pro duct which ha s been subjected t o improper usa ge,
neglect or unauthorized repair or installation.
Besides, warranty does not cover the faulty usages or consumable parts. (Cable &
battery are consumable.)

Safety instructions

Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume n o liability for any resulting personal
injury or damage to property.

* Don’t put scanner in places excessively high temperatures, such as expose

under direct sunlight
* Don’t use scanner in extremely humid area or drastic temperature change
* The rechargeable battery is permanently built into the product and cannot be

replaced.
* Never damage the rechargeable battery. Damaging the casing of the

rechargeable battery might cause an explosion or a fire!

Operating elements

* Please switch ON and charge scanner for 3~4 hours at first time

before use.

How to Connect to Smartphone or Tablet

1. Make sure your device has HID or SPP profile

2. Turn off Power-Saving mode on your smartphone/tablet first

3. Then, choose HID or SPP profile and scans the fol lowi ng 2
setting codes before connecting to smartphone/tablet.
(A1  A2 or B1  B2)
If you don’t know what profile your device is, please try HID
profile first, then, SPP profile.

HID profile

SPP profile

A1

B1

A2

B2

* Under HID profile, press the left button for 4 seconds to unpair device.

Scanner can then be connected to other BT device.

Power Saving button:
Press the button for 2~3
seconds then enter power
saving mode

SCAN/ Power ON
Button

(For iOS Device ONLY)
the button to raise and lower
ON-Screen Keyboard

Indicator (LED)

Mini USB

port
with protective cover
charge scanner via mini USB host cable.

Exit
Window

1

1. click the “Settings” 2. click “General”

3. click “Bluetooth”

4. Turn it ON, and search the
Devices

5. Select “Rxxxxxx” to connect

6. When see the “Connected” means
the connection is OK.

(example: pairing with iPhone)

4. Please complete the connection procedures as the above photos.

5. After the connection is completed, the RED light will be OFF.

6. Before using WordPad file or appropriate APP, please set keyboard language
of device to US language. Then, scan the barcodes and the barcode data
will show on the cursor side. If the data cannot send to smartphone/tablet,
please scan the “Reset Configuration to Defaults” setting codes (on page #2).

Notes:

* This product complies with Bluetooth standa rds. This device that commun icated with

this product must support the s ame SPP or HID . F or oth er Blu etooth devi ces with
other profiles we cannot guarantee a connection before the product has been tested.

* The communication speed an d ra nge of th e product may v ary due to obstacles and

radio wave condition between th e product and device to which it is conn ected.
Condition on the host device may also affect the communication speed and range of
the scanner.

LED Indicator Information

Orange LED ON Full charged
Orange LED Flashing Charging / Low battery
Red LED ON Offline / out of service
Green LED ON Good read
Orange LED ON Good read (Batch mode)

Remark:

* When the battery power is too low , the Or an ge LED wil l flash a nd beep once.

Scanner should be charged immediately.

* If scanner shuts down it is recommended to charge it fully before turning it

back on.

* Under power-saving mode, there will not be LED indication when charging.

Reset Configuration to Defaults

(scan from A1 to A6 for HID profile or B1 to B6 for SPP profile)

HID profile

SPP profile

A1

B1

A2

B2

A3

B3

A4

B4

A5

B5

A6

B6

There are two operating modes on the scanner

1. Data Transmission mode (Default)

It is a necessary to scan “clean memory data" when

switching between these two modes.

With i n 2.4GHz r ad i o r a n g e Beyond 2.4GHz radio range

Data
read

Transmit data to
smartphone/tablet directly

Save data into scanner’s memory,
scanner will transmit data to
smartphone/tablet automatically
when back to 2.4GHz radio range.

Enter Data Storage mode

LED

Green/ Orange LED flashes
followed by 3 beeps.

2. Data Storage mode (Batch Mode)

It is a necessary to scan “clean memory data" when

switching between these two modes.

Data
read

Save data directly to scanner’s memory, It will transmit the data to
smartphone/tablet after you scan the Transmit memory data
code. To delete data please scan the Clean memory data code.

Enter Data Transmission mode

LED Green/Orange LED flashes followed by 3 beeps.

Always Clean memory data before switching to Data Tr ansmission

Mode.
Otherwise Red/ Orange LED will flash with one long beep and will not
switch modes.

Under Data storage Mode

The data can be kept or deleted after data transmission

Keep the data

(Default)

Delete the data

Transmit memory data

Green/Orange LED Flashes followed by 3 beeps

Clean memory data

Green/Orange LED flashes follo w e d by 3 bee p s
T

he barcode data which is stored in the memory will be deleted.

2