![](/html/80/809f/809fcce83bac3c7a8fb9beea73efdfc0891d005c7124d9444b910c1401ea8185/bg1.png)
Programming Quick Guide
- FS5102N
Installation
Make sure that the scanner has the correct cable to plug in the PC as
below described:
* Note : Ple as e i ns tal l P L-2 303 d riv er fo r USB s eri al
Reset Configuration to Defaults
If you are unsure of the scanner configuration or have scanned
the incorrect codes, please scan from A1 for USB HID or B1 to B2
for RS232 or USB Serial. This will reset the scanner to its factory
defaults.
* Note: Plea se ins ta ll PL- 23 03 drive r for US B Ser ia l.
Keyboard Country
(HID only)
Scan the appropriate country code as below to program the keyboard
layout for your country or language. As a general rule, the following
characters are supported, but need special care for countries other
than the United States: @ | $ # { } [ ] = / ‘ \ < > ~
![](/html/80/809f/809fcce83bac3c7a8fb9beea73efdfc0891d005c7124d9444b910c1401ea8185/bg2.png)
Information in this document is subject to change without notice.
For more information, please visit:
www.riotec.com.tw
R_171205_01