Rinnai Smart Port WF-60A1 Operating & Installation Manual
Smart Port – Wi-Fi Kit
For Residential and
Light Commercial Air Conditioners
Operating & Installation Manual
APPLY SPARE
QR CODE
LABEL
HOME OWNER TO RETAIN FOR FUTURE REFERENCE
This page is intentionally blank
Congratulations on the purchase of a Rinnai Smart Port which
is compatible with selected Rinnai and Brivis Air Conditioners.
Terms and Conditions
Please read Terms and Conditions carefully before proceeding
with downloading the App.
Disclaimer
IMPORTANT NOTICE: This document is a guide only.
Laws, regulations and industry standards can vary between
States and Territories. Accordingly, this guide must be read
in conjunction with, and subject to, all laws, regulations and
industry standards applicable in the State or Territory in which
the products are installed. You must ensure that the installation
of the products will comply with those laws, regulations
and standards, and that the products recommended to
customers are t for the purpose for which they are intended.
Privacy Notication
Rinnai Australia Pty Ltd will collect personal information when
warranty and maintenance registration forms are completed.
This personal information is collected under the guidance of the
Privacy Information Protection Act 1998.
The purpose of collecting this information is to:
process customer requests for us to provide service activities;
•
register purchases of equipment for warranty;
•
register requests for a survey/quotation for heating, ventilation,
•
and air conditioning goods and services.
The intended recipients of the information are:
employees of Rinnai.
•
federal and state governments who may require the information
•
for administration purposes.
While the supply of the information is voluntary, if our customers
cannot, or do not wish to provide the information sought, the
company may not be able to provide the services requested. If
information has already been provided, an application can be
made for access or amendment of that information, or to request
that it not be used. Customers have a right of access to, and
correction of, the information concerning them in accordance with
the relevant procedures under the Act.
Enquiries concerning this matter can be addressed to the
Business Practices Ocer using the ‘Contacts’ on page 36.
Shall
Indicates a mandatory requirement of this manual.
Should
Indicates a recommended requirement of this manual.
Any deviations from these instructions may, at the discretion of the
manufacturer, void the warranty. As a result, the customer and/or
installer may be charged a fee for non-product warranty related
call outs. Also note that failure to comply with these instructions
may preclude company service personnel from being able to
service the device.
Rinnai 3 Wi-Fi Smart Port OIM
General Compatibility
All the following Rinnai (and Brivis) branded Residential and Light
Commercial products that have a “CN40” terminal on the PCB of
the INDOOR UNIT, are compatible for use with the Smart Port
accessory module.
Ducted Inverter
•
Cassette Inverter
•
Slim Ducted Multi Inverter
•
Compact Cassette Multi Inverter
•
For multiple INDOOR UNIT installations, one Smart Port is
required for each INDOOR UNIT.
Contact Rinnai Technical Support for further information.
Rinnai 4 Wi-Fi Smart Port OIM
WARNINGS AND IMPORTANT INFORMATION
IMPORTANT
NOTE
NOTE
READ ALL INSTRUCTIONS BEFORE USING THE DEVICE AND APP.
Always comply with the following precautions to avoid dangerous situations and to ensure optimum performance.
Failure to carefully read and follow all instructions in this manual can result in equipment malfunction, property
damage, personal injury and/or death.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in personal injury or death.
WARNINGS: Indicates a potentially hazardous situation which, if not avoided, could result in personal injury or
death.
CAUTIONS: Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate
injury or damage to the appliance. It may also be used to alert against unsafe practices.
Read all the safety precautions carefully before installing the unit.
Outlined below are important safety guidelines which must be followed.
Applicable system: iOS and Android. Recommended iOS 9.0 and above, Android 4.0 and above.
Due to special circumstances which may occur, not all Android and iOS systems are compatible with the App.
The manufacturer will not be held responsible for any incompatibility issues.
The manufacturer will not be held liable for any issues and problems caused by the internet, Wi-Fi router and Smart
devices. Please contact the original provider for further help.
Wireless safety strategy
Smart Port only supports WPA-PSK/WPA2-PSK encryption and non encryption.
•
Smart Phone camera needs to be 5 million pixels or above to ensure QR code scans clearly.
Depending on your network, time-out may occur. Therefore, it may be necessary to repeat network conguration.
Rinnai 5 Wi-Fi Smart Port OIM
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
NOTE
NOTE
NOTE
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
•
The supplied remote control is used to congure and connect to Wi-Fi.
•
The supplied remote should be retained in the event the connection needs to be established or set up needs to
•
be repeated.
The supplied remote control can also be used to operate the system if the original system was supplied with a
•
remote control. Point remote control towards the Smart Port Receiver.
A NOTE ON ILLUSTRATIONS
The illustrations used in this manual are for explanatory purposes only and the shape of your unit may vary slightly
from that which is shown in this manual.
The ‘Nethome Plus’ App conguration and user screens are subject to change.
•
With our policy of continuous improvement, we reserve the right to change, or discontinue at any time, specications,
design, illustrations and content without notice. Pictures for illustration purposes only.
Rinnai 6 Wi-Fi Smart Port OIM
1.0 TABLE OF CONTENTS
1.0 Specications 8
2.0 SmartPortKit 8
2.1 Kit Contents. ................................................................9
2.2 Dimensions ................................................................10
3.0 Installation 10
3.1 Smart Port Wiring ......................................................10
3.2 Location .....................................................................10
3.3 Smart Port Without Wired Controller .........................11
3.4 Smart Port With Wired Controller ..............................14
4.0 DownloadandInstallApp 18
5.0 UserRegistration 19
6.0 NetworkConguration 20
6.1 Conguration–Android ............................................21
7.0 UsingTheApp 30
8.0 SpecialFunctions 31
Contacts 36
6.2 Conguration–iOS ..................................................25
Rinnai 7 Wi-Fi Smart Port OIM
1.0 SPECIFICATIONS
2.0 SMART PORT KIT
Model WF-60A1
Standard IEEE802.11b/g/n
Antenna Type External omnidirectional Antenna
Frequency Wi-Fi: 2.4G
Maximum Transmitted Power 15dBm Max
Operation Temperature 0°C~45°C/32°F~113°F
Operation Humidity 10%~85%
Power Input DC 5V/300mA
Remote Control Battery Rated Voltage - 3.0V (2 x AAA
1.5 Volt Batteries)
1.
Do not install the Smart Port in areas covered in heavy oil, vapor
or sulphur gases, otherwise this product will react and may lead
to system malfunction.
Kit Contents – See Figure 1
No. Description Qty
1 Smart Port (Receiver) 1
2
3 Extension (6m) PN: B026005 1
Looms
4 CN40 DRCi PN: B080175 1
5 Remote Control for Setup 1
6 Smart USB 1
7 Smart Port Unique ID QR Label 1
8 Screws (M4X20) 3
9 Wall Plugs 3
10 AAA Batteries (1.5 Volts) 2
11 Operating and Installation Manual 1
CN2 – 1
Please check that all parts have been supplied.
Rinnai 8 Wi-Fi Smart Port OIM
2.1 KIT CONTENTS.
3
8
Figure 1. What’s in the box
1
5
Smart Port – Wi-Fi Kit
Smart Port
For Residential and
Light Commercial Air Conditioners
for Ducted Reverse Cycle Air Conditioners
Operating & Installation Manual
Operating & Installation Manual
PLEASE RETAIN FOR FUTURE REFERENCE
HOME OWNER TO RETAIN FOR FUTURE REFERENCE
APPLY SPARE
QR CODE
LABEL
11
6
4
7
10
9
2
Rinnai 9 Wi-Fi Smart Port OIM
2.2 DIMENSIONS
IMPORTANT
3.0 INSTALLATION
Backing Plate
Figure 2. Dimensions
Front Cover
Internal PCB Plate
Figure 3. Components
Front Cover
Backing Plate
3.1 SMART PORT WIRING
Determine wiring conguration of your Smart Port before
commencing.
For installations without wired controller, refer to Section 3.3.
For installations with wired controller, refer to Section 3.4.
3.2 LOCATION
Indoors only
•
Internal plaster wall or ceiling
•
The Smart Port shall be positioned in a waterproof environment
within 10m of your wireless router (where applicable) to ensure
reliable communication. If this distance is more than ten meters
the transmitting signal may be predisposed to interruption. Please
consult your installer in the rst instance if this issue is identied.
The environment must not exceed a temperature of 70°C and
relative humidity of 85%.
The Smart Port MUST NOT be installed inside
any appliance cabinet as this will adversely aect
the Wi-Fi connection. Do not position outside or
under oor.
Rinnai 10 Wi-Fi Smart Port OIM
3.3 SMART PORT WITHOUT WIRED CONTROLLER
Smart Port
Indoor Main PCB
CN2
Loom CN2
CN3
Figure 4.
Fit the looms supplied as shown in Figure 4.
One side is connected into port CN40 on the indoor unit main
PCB. The other loom is plugged into CN2 on the Wi-Fi Smart Port
terminal.
If you require more than a 6m loom extension, you can order
an additional 6m extension from the manufacturer. Rinnai Part
Number B026005.
Loom Extension (6m)
CN40
Loom CN40 DRCi
Rinnai 11 Wi-Fi Smart Port OIM
Loading...