•
Caution for the type of gas supplied
•
Ensure that the type of gas (gas group) supplied is same as the one mentioned on the nameplate of the appliance.
•
Use of the appliance with incorrect gas type could result in carbon monoxide poisoning due to incomplete
combustion or burn injury due to explosive ignition.
•
When you move to another house, ensure that the type of gas supplied is same as the one mentioned on the
nameplate once again.
•
About installation
•
Be sure to observe the precautions on installation to ensure compliance with the Fire Prevention Ordinance.
Insufficient clearance around the appliance may result in fire. Even if an inflammable wall is covered with the
object such as stainless steel plate, it is necessary to maintain the same distance as required for combustible
objects.
•
Do not refurbish the appliance’s surroundings after the installation (such as enclosing the appliance,
installation of hanging shelf). Such a refurbishment may not be compatible with the installation standards or
cause imperfect combustion or fire.
•
Safety distance to combustible object and fi re prevention measures
•
If the distance of at least 20cm (sides), 15cm (rear)
(for RGK-62D, 20cm and above) and 100cm (top) is
unavailable between the appliance and flammable
wall, installation of a heat insulating plate is required
as shown in the illustrations on the right.
•
Do not leave the griller while the burner is on
Leaving the griller or going to sleep while the burner is on is
strictly prohibited. The food being grilled could burn or catch
fire and may result in fire damage.
Heat insulating plate
Material Thickness Caution
Steel plate
Stainless steel plate
0.6cm and above
0.6cm and above
Ensure a space at least 3cm and provide adequate
reinforcement to prevent harmful deformation.
WARNING
•
I
f the wall around the appliance is flammable
(such as wooden wall), be sure to keep a
distance of at least 20cm, 15cm (for RGK-62D,
20cm and above) and 100cm for sides, rear
and top respectively.
RGK-61D, 62D, RGB-60B
Gap between ceiling
and side wall
Gap between
back wall side
100cm
and above
20cm and above
0cm and above
Combustible
object
20cm and above (RGK-62D)
15cm and above
0cm and above
Combustible
object
RGK-61D, 62D, RGB-60B
Heat insulating plate
Heat insulating plate
Gap 3cm
and above
Gap 3cm and above
50cm and
above
0cm and
above
Leave a gap
0cm and above
0cm and
above
0cm and above
80cm and
above
0cm and
above
Combustible
object
Combustible object
RGK-64
Gap between ceiling and side wall
Combustible object Combustible object
Combustible
object
Combustible
object
20cm and above 20cm and above
100cm and above
Combustible
object
0cm and above 0cm and above
15cm and above
0cm and above
Gap between back wall side
RGK-64
3cm and above
Combustible object
Heat insulating plate
0cm and above
0cm and above
80cm and above
Combustible object
Combustible object
Leave a gap
3cm and
above
0cm and
above
0cm and
above
0cm and
above
Leave a
gap
0cm and
above
3cm and
above
Heat insulating plate
Heat insulating
plate height
50cm and
above
0cm and
above
The nameplate is placed on
the right side of the griller.
<Nameplate>
Example) 96.06 (Manufactured on June 1996)
Confi rm the gas type
(Model name)
(Manufactured date)
(Type of gas (gas group))
(Serial No: YS)
(Distributor)
(Gas consumption)
2