Rinnai REU-VR1620WS, REU-VR2426WS Operation/installation Information
Operation / Installation
Information
Continuous Flow Water Heaters used in Rinnai
Solar Hot Water Systems
This appliance shall be installed in accordance with:
• Manufacturer’s Installation Instructions
• Current AS/NZS 3000, AS/NZS 3500 & AS 5601
• Local Regulations and Municipal Building Codes including local OH&S requirements
This appliance must be installed, serviced and removed by an Authorised Person.
All Rinnaigas products
are A.G.A.certified.
AS 2712
Lic No.1849
SAI Global
Model No.
REU-VR1620WS
REU-VR2426WS
Model Name
Solar 20
Solar 26
Rinnai Australia 1 RA 14-001 Op/Ins Solar Hot Water - Issue 4.0 - 14/01/14
Your Rinnai Continuous Flow water heater has been certified by the Australian Ga s Association, the A.G.A.
Certification Number is shown on Data plate.
This Appliance must be installed correctly by an authorised person. The installation of gas, water, and electricity
must conform to local regulations.
The installation must also comply with the instructions supplied by Rinnai.
Please keep this instruction booklet in a safe place for future reference.
Notice to Victorian Consumers
This appliance must be installed by a person licensed with the Plumbing Industry Commission.
Only a licensed person will have insurance protecting their workmanship.
So make sure you use a licensed person to install this applian c e and ask for your Compliance Certificate.
For Further information contact the Plumbing Industry Commission on 1800 015 129.
ALWAYS......
Test the temperature of the water with your elbow before placin g
your child in the bath, also carefully feel water before bathing or
showering yourself.
Supervise children whenever they are in the bathroom.
Make sure that the hot water tap is turned off tightly.
CONSIDER.....
Installing child proof tap covers or child resistant taps (both
approaches will prevent a small hand being able to turn on the tap).
NEVER…..
Leave a toddler in the care of another child. They may not
understand the need to have the water temperature set at a safe
level.
Rinnai continuous flow models REUVR1620WS (Rinnai Solar 20) and REUVR2426WS (Rinnai Solar 26) are suitable
only for installation as gas boosters in
Rinnai solar hot water systems (see
picture right). These models are not
suitable for use as ‘stand alone’
appliances for the purposes of supplying
hot water.
For non solar hot water applications
Rinnai have a dedicated range of
continuous flow water heaters available.
Contact Rinnai for more details.
IMPORTANT
Solar
storage
cylinder
Cold water
supply
Gas
boost
Solar collectors
To hot water
outlets in house
Rinnai REU-VR1620WS
Rinnai REU-VR2426WS
This drawing is not detailed enough for installation purposes.
REGULATORY INFORMATION
WARNING ABOUT HOT WATER
APPLICATIONS
Loading...