Rinnai RDT-62-RM-W, RDT-62-RM-S Operating Instructions Manual
Operating Instructions
Gas Clothes Dryer
RDT-62-RM-W
Model Name
RDT-62-RM-S
Thank you for buying this Gas Clothes Dryer.
Read This Document Thoroughly to Ensure Safe Use
• Before you use this dryer, thoroughly read these Operating Instructions to ensure safe and correct use.
Drying Is Now a Joy to Do and Feel!
Large 6.5 kg Loads of CLothes aLso Can Be dried
• Leave large loads that have been batch washed up to the drier to dry.
You can dry clothes easily in a single operation by the THICK/EXTRA
course.
dry QuiCkLy By the fast 1kg Course
• You can dry clothes quickly when you are hurried in the morning or you
want to wash your clothes in as short a time as possible after returning
home.
1 kg of quick-drying clothes consisting of at least 50% man-made fibers will dry in 20
minutes.
four Courses to Choose from
1. GENERAL course
For drying 6 kg of clothes such as underwear and shirts
2. THICK/EXTRA course
For drying 6 kg of thick clothes, 4 kg of towels, four sheets, etc., and 6.5 kg of underwear and long-sleeved
shirts
3. DELICATE course
For drying 1 kg of clothes such as stockings that are easily affected by heat
4. WARM course
For drying and warming underwear, shirts and other clothes that still feel damp (1 kg by 10-minute timer)
1
easy fiLter removaL
• The filter can be easily removed with your
fingers, which makes maintenance and
cleaning easy to do.
Table of contents
To Ensure Safe Use
Safety Precautions
(Be Sure to Follow These Precautions) ∙∙∙∙∙∙∙∙∙∙∙∙3
Safety Precautions
(Installation) ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 5
Safety Precautions (Actual Use) ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 9
Safety Precautions (Notes) ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 15
Introduction
Names & Functions of Parts ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 19
Before Using the Equipment ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙23
Flow of Operations ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 23
Items You Must Not Dry ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 24
Operation
How to Select Courses∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 25
How to Use Drying Course Operation ∙∙∙∙∙∙∙∙∙∙∙∙ 27
How to Use Timer Operation ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 31
How to Use FAST 1KG Operation ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 33
Buzzer Functions ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 36
Advanced Operation ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 37
To Ensure Prolonged Operation
Daily Inspection and Maintenance ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 39
Maintenance Methods ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 40
Troubleshooting ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 43
Displayed Messages ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 45
Specifications and Dimensional Diagram ∙∙∙∙∙∙∙ 49
2
Safety Precautions (Be Sure to Follow These Precautions)
This pictograph symbol indicates an “alert” for
items you should be careful of.
Danger
This symbol indicates that ignoring the accompanying explanation and
mishandling the product might result in death or serious injury or a re hazard.
Warning
This symbol indicates that ignoring the accompanying explanation and
mishandling the product might result in death or serious injury or might cause
the risk of re.
Caution
This symbol indicates that ignoring the accompanying explanation and
mishandling the product might result in slight injury or might cause property
damage.
This pictograph symbol
indicates a “prohibited action”
that must not be done.
Naked Flames
Prohibited
Disassembly
Prohibited
Wet Hands
Prohibited
Splashing With
Water Prohibited
This pictograph symbol
indicates a “compulsory
action” that you must do.
Remove power plug
from power outlet
Ventilation required
Be sure to connect
ground lead
• The following describes precautions that must be followed to ensure
the same use of the product and to prevent injury to the customer or
others and damage to property.
• Fully understand the meaning of the following symbols before reading
this document.
• The meanings of pictograph symbols used in this manual are as
follows.
3
Danger
This symbol indicates that ignoring the accompanying explanation and mishandling
the product might result in death or serious injury or a re hazard.
Naked
Flames
Prohibited
The following actions are prohibited
when there is a gas leak:
• Never light a fire
• Do not turn electrical apparatus switches on or off
• Do not remove or insert power plugs
• Do not use telephones in the immediate area
• Do not use fire to find source of gas leak
• Do not press nearby door bells located on the same floor
• Do not reopen the gas valve until gas is no longer leaking
Flames or sparks might ignite the gas and cause an explosion.
Match
Use is prohibited during a gas leak
• If you notice a gas leak, immediately stop use of the
product
1. Close the gas cock on the product and the gas cock on the meter.
In the case of gas cocks without a knob, remove the connector from
the gas cock.
2. Open doors and windows to allow gas to escape to the outside.
3. Call the 24-hour Emergency Hotline from the nearest outside
telephone.
Gas cock (example)
Close the gas valve!
4
Model Name
Safety Precautions (Installation)
Warning
This symbol indicates that ignoring the accompanying explanation and mishandling
the product might result in death or serious injury or might cause the risk of re.
Remodeling/Disassembly Prohibited
• Users must never use tools to install, move, disassemble,
repair, or remodel the equipments themselves.
Disassembly
Prohibited
– Doing so may cause carbon monoxide poisoning or fire, and cause
the equipment to malfunction.
– Installation, moving, disassembly, repair, or remodeling of the
equipment requires highly special knowledge.
Checking gas and power supply used
• Use the equipment with only the gas type (gas
Data plate (example)
group) and power supply (power voltage/frequency)
indicated on the data plate on the
equipment. Do not use with other
gas types or power supplies.
– Do not use the equipment when gas and
power supply used does not match the
gas and power supply indicated on the
data plate. Then, incomplete combustion
may cause carbon monoxide poisoning,
or cause explosive ignition or equipment
to malfunction.
MODEL
FOR GAS
PRESSURE IN.W.G
INPUT Btu/hr
VOLTAGE V
CYCLE Hz
SERIAL NO.
RINNAI CORPORATION MADE IN JAPAN
Product date (year/month)
Lower 2 digits of production year
Fire Prevention Equipment in Surrounding Area
• Allow sufficient space between the equipment
and flammable objects such as furniture, walls
and shelves.
– Allow at least the standard installation dimensions
(in figure at right) in consideration of maintenance
management and works. Failure to do so might result
in fire or the equipment overheating and cause burns.
Standard installation dimensions
300
250
100
Check gas type
Production month indicated at 2 digits
(Unit: mm)
500
45
5
Splashing
Caution
This symbol indicates that ignoring the accompanying explanation and mishandling
the product might result in slight injury or might cause property damage.
With Water
Prohibited
Installation Site
• Do not install the equipment in hot and humid locations
such as bathrooms or in locations (excluding
veranda installations) that are exposed to wind and rain.
Doing so may cause a short circuit, and result in electric shock or fire.
This may also cause the equipment to malfunction.
• When using the equipment outdoors, such as on
a veranda or in the space under the eaves, attach
a roof like a sunshade above the equipment, and
Discharge top
(option)
install the optional discharge top.
Water or rainfall directly splashing the equipment may cause
a short circuit, and result in electric shock or fire. This may
also cause the equipment to malfunction.
Ventilation
• If no humidity duct (venting hose) is fitting, the room shall be provided with air
vents which communicate directly with outside air and are sized in accordance
with the following table:
Room Volume (m3) < 5 5 – 10 > 10
Minimum permanent
opening free area (cm
If the room has a door which opens directly to outside, no permanent opening is required.
*
2
)
100 50
*
• If humidity duct is connected, air vent is not necessary.
Power cord
• Do not pass the power cord under or allow it to come
in contact with the equipment.
Doing so might damage the power cord, and result in electric
shock or fire.
Nil
Power cord
6
Safety Precautions (Installation)
Installation Site
• Do not use the equipment where there is the risk of objects
falling such as under shelves.
Falling objects may cause a fire or equipment to malfunction.
• Do not use the equipment at locations where lots of steam,
noise, etc. from the discharge top might annoy neighbors.
This may cause condensation or noise.
• Do not use the equipment at locations where there is lots of
cotton dust.
This may cause the equipment to malfunction.
• Do not direct discharged exhaust gas or steam from the
discharge top at pets, potted plants, etc.
Doing so might result in the pets death or cause plants to wither.
7
• Ask the store of purchase or a contractor to install and move
the equipment and perform incidental work, and get them to
install the equipment properly at a safe location.
Defective installation performed by users themselves might result in fire,
carbon monoxide poisoning or gas leaks.
• When using the equipment placed on an exclusive stand,
install the exclusive stand immediately in front of a wall, and
join the exclusive stand to a wall or pillar by chains (provided
with the exclusive stand). Also, secure the equipment by
screwing it onto the exclusive stand.
If there is no wall behind the equipment, or the chains are not joined
sufficiently or the equipment is not sufficiently screwed onto the exclusive
stand, the equipment might tip over and cause an injury.
• Use the equipment at a flat, stable and sturdy
location, a location that can sufficiently
withstand the weight of the dryer, and a location
that is not subject to excessive noise or
vibration. Using a spirit level, make sure that the
equipment is level.
If the equipment is used at an unstable or tilted location,
the safety interlock might not function properly or the
equipment might tip over and cause an injury. Also, if the equipment is used tilted towards the
front, the front door might open with force and cause an injury. This might also damage the
building or cause noise.
Discharge of Humidity
• Do not directly connect the discharge tube to a ventilator, etc.
Insufficient air flow from the ventilator might block air discharge and stop the equipment to stop,
and cause humidity to leak or mold to form.
• For optimal function of the machine, the length of dia. 80 mm humidity duct is
recommended not to exceed 6 m and 1 bend. Reduce 2 m when adding one bend.
• Maximum allowable length is 11 m and 1 bend (equivalent to 5 m and 4 bends)
for dia. 80 mm humidity duct. Reduce 2 m when adding one bend. Under this
condition, the machine still functions safely and normally, however, the drying
time and the frequency of lint filter cleaning may increase.
• According to the real situation, in case it is not necessary to install the humidity
duct, please use the exhaust humidity top to install at exhaust hum.
8
Safety Precautions (Actual Use)
Warning
This symbol indicates that ignoring the accompanying explanation and mishandling
the product might result in death or serious injury or might cause the risk of re.
Fire Prevention
• Do not use objects that might ignite near the equipment.
Do not place or use objects, etc. such as aerosols, gasoline or benzine
that might ignite. Doing so may cause an explosion or ignition which will
result in a fire.
• Never dry clothes made of polypropylene fiber or
clothes with the following oils on them after they
have been washed.
When temperature rises, clothes made of polypropylene fiber
may ignite spontaneously. Also, oil, etc. is hard to remove
completely even by washing. So, heat generated by oil
combustion may cause it to ignite spontaneously or catch fire.
– Edible oil, machine oil, animal oils
– Dry-cleaning fluids, perm solutions
– Beauty treatment oils (body oils, beauty salon oils, etc.)
– Benzine, paint thinner, gasoline
– Resins (cellulose type)
Gasoline
Oil
Benzine
Thinner
Thinner
Gasoline
Benzine
• Do not stop operation by removing the power plug.
This may cause the equipment to overheat. Oil , etc. adhering to clothes
also may cause spontaneous combustion due to heat generated by oil
combustion.
• Make sure that there are no flammable objects such as
cigarette lighters or matches in your pocket.
These may cause a fire.
• Remove clothes after drying ends. In particular, be sure to
remove clothes immediately when the equipment has been
stopped immediately before or after drying ends.
Oil, etc. adhering to clothes may cause spontaneous combustion from
heat generated by oil combustion if clothing is left for a long period of
time.
Match
9
When Using the Gas Dryer
• Do not allow unaccompanied small children to use the gas
dryer by themselves, and do not use the gas dryer within
the reach of infants.
Doing so might cause burns, electric shock or injury.
• When opening or closing the front door, do not bring your
hand or fingers close to the door hinge.
Doing so might result in your hand or fingers being nipped and cause an
injury.
• Before opening or closing the front door, make sure
that there are no people or obstacles in the immediate
surrounding area, and gently open or close with your hand
on the door.
Opening or closing the door with excessive force may cause an injury,
damage the equipment or cause it to tip over. The dead weight of the
front door or the affect of wind may cause the front door to open with
force and cause an injury.
10
Safety Precautions (Actual Use)
Power Cord and Plug
• Do not remove or insert with wet hands.
This may cause electric shock or injury.
Wet Hands
Prohibited
• Do not extend power cords by cutting them.
Install the equipment within reach of the power cord to the power outlet.
This may cause electric shock or injury.
• Do not connect damaged power cords or plugs to power outlets or use power
outlets with loose connections.
Doing so may cause an electric shock or generate heat, and result in fire.
• Do not remove the power plug by pulling the power cord.
When removing the power plug, do not pull it by its power cord but remove it by holding the power
plug. Tugging the power cord may damage it, which may result in an electric shock, short circuit or
fire or cause the equipment to malfunction.
• Do not use the equipment above the rating of the power outlet or wiring
appliance. Use the equipment with only a 240V alternating current (AC) power
supply. Do not use with other power supplies.
When the designated rating is exceeded, for example, by using a multi-outlet extension cord, this
may generate heat, and result in fire.
• Do not exert unnecessary force or place heavy objects on the power cord, or use
the power cord in a bundled state.
This may cause electric shock or injury.
• Firmly insert power plugs into power outlets as far as they can go.
Failure to do so may cause an electric shock or generate heat, and result in fire.
• Periodically remove dust, etc. from power plugs.
Remove the power plug and wipe clean with a dry cloth. Accumulation of dust on the power plug
may cause power insulation resulting from moisture, etc. or cause fire.
11
Remedies for Abnormal Operation
1. Press the “Start /
Pause” switch.
2. Open the front door
and hold down the
“Power” switch until
you hear a beep.
3. Close the gas valve. 4. Remove the clothes.
Beep
Beep
Press the switch with
the front door open
until you hear a beep.
Warning
This symbol indicates that ignoring the accompanying explanation and mishandling
the product might result in death or serious injury or might cause the risk of re.
• If operation is abnormal, immediately stop use of the equipment, close the gas
cock, and remove clothes.
1. If gas does not light, or if you sense abnormal combustion or temperature, smell abnormal odor,
or hear abnormal noise during operation, immediately perform steps 1 to 4 in the figure below.
Leaving the equipment in this state may cause an explosion or a fire.
2. If you sense that operation is abnormal, follow instructions given in “Troubleshooting” and
“Displayed Messages.” (See pages 43 to 48.)
3. If even the above steps do not remedy the problem, immediately stop use of the equipment,
contact the store of purchase or call Customer Services Hotline.
• In the event of an earthquake, fire or similar event, immediately stop use of the
equipment, and close the gas cock and gas cock on the meter.
(In the case of gas cocks without a knob, remove the connector from the gas cock.)
12
Safety Precautions (Actual Use)
Caution
This symbol indicates that ignoring the accompanying explanation and mishandling
the product might result in slight injury or might cause property damage.
Ventilation
• During use, ventilate the room, for example, by opening
the window.
Ventilation
Required
Not ventilating the room will cause incomplete combustion which might
result in carbon monoxide poisoning.
When Using the Gas Dryer
Splashing
With Water
Prohibited
• Do not splash the body or drum with water or wash with
water.
Doing so may cause an electric shock or a short circuit which will result
in a fire.
• Do not block the air inlet with a curtain or similar heavy
material or clothing.
This will cause incomplete combustion or the equipment to overheat
which will result in burns or equipment malfunction.
• Do not use the equipment at locations that are susceptible
to humidity.
Clothes, etc. are sometimes damaged by the humidity contained in the
discharged exhaust gas.
• Make sure that the front door is closed.
If the equipment is operated with the front door open, this may result in
the equipment malfunctioning or clothes flying out.
13
• Before putting clothes in the dryer, check clothes for metal
Clicks
in place
powder or metal pieces attached or in pockets.
These may cause burns or equipment malfunction.
Fire Prevention, Be Careful of Burns
• Do not remove clothes during operation.
The inside of the drum, front door and clothes are hot. Do not touch
these directly with your hands. Doing so might cause burns. Wait for
operation to end before removing clothes.
• Use the equipment only for drying clothes (including fabric
footwear). Do not use it for any other purpose.
This may cause a fire.
• Do not cover the top of the dryer with a blanket or clothes.
This may cause a fire. This may also deform the equipment or cause the
equipment to malfunction.
• If the equipment stops abnormally during drying, allow the temperature inside of
the drum to drop before removing clothes.
Removing clothes immediately may cause burns.
Remove
Power Plug
from Power
Outlet
Power Cord and Plug
• Before inspecting and performing maintenance on the equipment, be sure to
remove the power plug.
Failure to do so may cause electric shock or injury.
14
Safety Precautions (Notes)
Notes
Checks Before Use
• Remove paper padding or packing material from each of the parts on the equipment,
and check the contents of the package and accessories against the Packing List.
(See page 23.)
Checking the Installation Site
• Do not install the equipment on electric carpets or hot
water heating mats. The weight of the equipment may
cause electric carpets or hot water heating mats to
malfunction. Also, the heat from the electric carpets or hot
water heating mats may disrupt equipment control.
• This equipment can be used up to an elevation of 1000
meters above sea. If it is used above this elevation, this
may cause defective lighting.
This equipment is a general household
electrical appliance.
• This product is for household use only. Do not use it for
commercial use. Doing so may cause an accident or a fire.
Do not use coin timers. Coin timers stop drying midway,
and so significantly shorten the service life of the
equipment. Oil , etc. adhering to clothes may cause
spontaneous combustion or ignition from heat generated
by oil combustion if clothing is left for a long period of
time.
Launderette
15
Loading...