Rinnai RDT-600, RDT-400 Operating Instructions Manual
MODEL
：
RDT-600 RDT-400
GAS TUMBLE DRYER
OPERATING INSTRUCTIONS
−
1
−
Caution
Warning
Attention on safety
Caution on Use
Fire Prevention
• Don’t put or use volatile and flammable goods like spray, benzene and gasoline close to
the dryer during operation.
• Don’t dry clothes which are stuck with oil, petrol,
dry-cleaning liquid and perm liquid with the dryer.
※Oil oxidation heat may cause spontaneous ignition and
inflammation of clothes.
• Confirm flammable things like a lighter and matches are not inside pockets . This may
cause fire.
•Don’t dry clothes or materials contain flammable substances like polyfoam, polyurethane
etc. User should pay attention to the clothes label.
Care for Ventilation
• A lot of fresh air is required for complete combustion of gas. Don’t use the dryer in a
closed room.
Dismantlement Prohibition
• Don’t disassemble, maintain and convert the dryer by unauthorised
personnel.
Caution for Burn
•Don’t take clothes out until the operation finishes completely. It
may cause burn injury due to high temperature around the drum
during the operation.
• In case unusual stop occurs during drying, open the door and let the temperature inside
the drum cools down before taking the clothes out from the dryer. If the clothes are taken
out immediately, burn injury may be caused.
−
2
−
Warning
Danger
Caution
Attention on safety
Usage
• Don’t spray water on and wash the dryer body and drum. Fire may
occur due to electrical shock, electric leakage and short circuit.
• Don’t cover the dryer with blankets and clothes. Fires and
unexpected accidents may occur.
• Don’t use the dryer other than the purpose of drying clothes. It may cause fires and
unexpected accidents.
• Remove metallic powders and things from clothes as electrical shock may be resulted.
Procedures at Unusual Case
• When a gas leak is noticed:
1. Stop use immediately
2. Close the gas valve
3. Open windows
and doors
• Never do the following during a gas leak:
- Do not ignite fire
- Do not turn on or off any electrical appliance
- Do not insert/remove power plugs
- Do not use nearby telephones and mobile
telephones
- Do not use fire to find source of gas leak
- Do not press nearby door bells located
on the same floor
- Do not reopen the gas valve
until gas is no longer leaking
Gas may ignite from fire/sparks,
causing a fire as a result.
• In case of unusual combustion, bad smell and unusual sound or
earthquakes and fires etc. during the operation, stay calm and turn the
power switch off. If the dryer is continuously operating under the same
condition, explosion and fire may occur.
Turn off the Power switch.
Close the
gas valve!
−
3
−
Caution
Warning
Attention on safety
Caution on Installation
• Don't install in bathroom, highly humid place or place exposed to a rainstorm. It might
cause an electric shock, electric leakage or a fire.
Installation Position
• Don’t put dangerous things, flower and pets nearby gas dryer. Flowers and pets may
die due to the exhaust gas and steam come out from the humidity duct.
• Don’t install dryer at places which affect other residents.
• Choose the place which can support the weight of dryer and will not amplify
noise and vibration which may damage building structure and create noise.
• Don’t use it at place where a lot of lint dust exist, which may cause
damages to dryer.
Ventilation
(i) For safe operation, the room in which the dryer is placed must be well ventilated. This includes
an openable window or equivalent
#
which must be opened during use.
(ii) If no humidity duct (venting hose) is fitting, the room shall be provided with air vents which
communicate directly with outside air and are sized in accordance with the following table:
Room Volume (m3) < 5 5 – 10 > 10
Minimum permanent opening free area (cm
2
) 100 50* Nil
(iii) If humidity duct is connected, air vent is not necessary.
Note
# Alternative acceptable forms of opening include adjustable louver, hinged panel or other means of ventilation that open
directly to outside air.
*
If the room has a door which opens directly to outside, no permanent opening is required.
−
4
−
Usual Care
Warning
Caution
Attention on safety
Humidity Duct Installation
• For optimal function of the machine, the length of dia. 80mm humidity duct is recommended not
to exceed 6m and 1 bend. Reduce 2m when adding one bend.
• Maximum allowable length is 11m and 1 bend (equivalent to 5m and 4 bends) for dia. 80mm
humidity duct. Reduce 2m when adding one bend. Under this condition, the machine still
functions safely and normally, however, the drying time and the frequency of lint filter cleaning
may increase.
Caution for Children
• Don’t let children use the dryer alone or place it at location
reachable by children. This may cause burning or electrical
shock if misused.
Installation Place
• Don’t install the dryer at unstable place which may cause accident by falling off.
• Don’t install the dryer under a shelf or place with falling off objects which may damage
the dryer.
• Don’t use the dryer at place which need dehumidification since the exhaust flue
contains moisture.
• Don’t install the dryer on the electrical carpet or hot water mat which will cause
accident.
• Install the dryer with enough distance from the flammable objects such as furniture,
wall and shelf etc.
Confirm
−
5
−
Attention on safety
Usual Care
General Home Appliances
• Dryer is for domestic use only. Do not use for commercial application. It may shorten the
life time.
Cautions for Drying
• Neither add extra clothes nor open the door during drying. Clothes may become
unevenly dry.
• Don’t put heavy things or hang down the door by children. It may cause
damages.
• In case of a power failure during operation, restart the dryer after the power is resumed.
How to handle clothes
• Too much clothes cause uneven drying and trouble. In case the spin-dry clothes are
over-loading into the dryer, divide them into 2 batches and dry separately.
• Wet clothes kept inside the dryer may cause corrosion and trouble due to the moisture.
• Don’t dry the glued clothes which may cause blocking at the filter. Use the glued spray
after drying.
• Enough spin dry by washing machine is required before using the dryer. If not
properly dehydrated, the drying time may take longer, and result in damages to
the dryer and leakage of electricity.
• When using chlorine bleach on clothes, they should be fully rinse before drying. If the
chlorine bleach remains, it may cause damages.
• Clothes stuck between front door and dryer drum may cause trouble to the drum turning and this
is dangerous.
Enough Dehydration
−
6
−
1
Quick Drying
High speed, powerful gas heated drying. Drying
time is reduced by 1/2 compared with electric
dryer.
3
Operation Cycle
Choose the operation cycle according to type of
clothes.
FUNCTIONS & FEATURES
The domestic
gas dryer is
economical and
easy to use. Please
experience its
various functions
and features.
4
4kg Loading Capacity & Compactness (RDT-400)
Easy installation at narrow
space.
2
Soften Finished by Easy Operation
Convenient automatic system. Just press a start
button, the dryer stops automatically after drying
is completed. Heated by gas makes clothes
soften finished.
6 kg Loading Large Capacity (RDT-600)
Powerful drying for 6kg of
clothes (dry clothes weight).
Main Features
Indicate the remaining time in accordance with the clothes volume at 2 minutes
after the operation starts. ( the remaining time is reduced for every 5 minutes.)
In case of the delicate cycle, it does not indicate the remaining time for a while.
All the time displayed is only estimated time and there is some difference with the
actual finishing time.
The remaining time may not be indicated properly if the filter clean lamp is on.
Indication of the remaining time
−
7
−
PART NAMES
BODY
ACCESSORY
Plastic Cover×3pcs
Used when changing
door opening
direction
Drum
Air Inlet Filter
protects the burner from lint
Back Cover
Gas Inlet Connection
Power Cord
Lint Filter
stops the lint from being
blown from the dryer
Operation Indicator
Data Plate
Discharge Duct
Handle
Inspection Door
Front Door
compatible to open from left
or right
Shoes Rack×1 Exhaust
Humidity
Top Assy
−
8
−
PART NAMES
OPERATION INDICATOR PANEL
“Clear Filter” Lamp
Red lamp is on when too much lint is
accumulated on the lint fi lter inside
the drum.
(for details, please refer to page 21)
“Operation/Combustion” Lamp
The green lamp is on during
operation.
The red lamp is on during combustion.
(for details, please refer to page 9)
Digital Indicator
Indicate the drying remaining time.
It also indicates the operation
details of the safety device in case of
unusual conditions.
(for details, please refer to page 6)
“Operation Cycle” Lamp
The green lamp is on when the
operation cycle is selected. The lamp
fl ashes during operation.
“Timer” Lamp
The green lamp is on when the timer
cycle is selected.
“Timer Cycle” Switch
This switch is used to select the timer
cycle.
“Power ” Switch
This switch is power ON/OFF Switch.
(for details, please refer to page 9)
“Program” Switch
This switch is used for the operation
cycle change.
(for details, please refer to page 11)
“Finish” Lamp
The green lamp is on when drying is
completed.(for details, please refer to
page 10)
“Timer Set” Switch
This switch is used for timer setting
for timer operation.
This can be set from 5 minutes
to
※
60 minutes. The dryer then
operates for only the set time.
(for details, please refer to page 12)
“Start / Pause” Switch
This switch is used to start or pause
the operation. Dryer operation can be
resumed by pressing this switch.
※RDT-600 can set up to 80 minutes.
Loading...