Rinnai RB-7303S-GBSM Operation And Installation Manual

RVN-RB7303SGBSM-31A-01
(Singapore)
CONTENTS
RB-7303S-GBSM
Components and part names Safety mark on glass top plate
............................................................................1
.........................................................................1
Specifications ......................................................................................................2
Installation Pan support, burner head Instruction for use
.......................................................................................................2,3
.................................................................................3
.............................................................................................4
Maintenance and trouble shooting manual for Rinnai
How to handle safety device and change batterry
.........................................5
.................................6
1.5 V D.C (”C” size battery)
Gas inlet
Battery box
COMPONENTS AND PART NAMES
For the best results from your Rinnai gas cooker, please read the instruction give below carefully prior to operate the unit.
- 1 -
- 6 -
Fig. 1
Pan support H
Burner head S
Burner head H
Burner body H
Top plate
Casing
Knob
Drip pan H
Pan support M
Drip pan M
Burner body M
Burner head M
SAFETY MARK ON GLASS TOP PLATE
Nev er use oversiz ed cooking utensi ls o r overload the cooking appli ances.
Do not place the cooker pan over the pan support side as it can cause turnbling. Never use oversized cooking utensils or overload the cooking appliances.
Do not remove the pan suppo rt and enclose the burner with a wok stand as this w il l concentrate and deflec t the heat onto the gas ho b.
Do not place any thing,e. g., flame tamer, asbestos mat betwe en pan and pan suppo rt as serious damage to appliace may resul t.
Place the supporting trivets of the gas hob or cooker pan in the correct position.
MAINTENANCE
* Wipe the top plate with a soft, damp cloth, and mild detergent regularly, should not
keep glass top plate too dirty because stains will affect the quality of glass surface.
* Wash the pan supports and drip pan, in warm water and detergent.
* In order to avoid dangerous situation arising from
breakage of glass, do not apply heavy weight or strong impact on glass top plate (Fig.9)
Fig.9
Fault
1. No ignition
2. Flame cannot be held
3. No main flame
4.Yellow flame
5. Unstable flame
Cause
Remady
Spark electrode is wet especially in high humidity season
Incorrect turning of gas control knob.
3.1 Gas meter cock and/or appliance isolating cock have been turned off.
3.2 Burner head is blocked by aluminium foil.
Accumulated grease and dirt on burner head.
Incorrect location of burner head.
Dry the electrode with clean tissue or dry cloth.
Open gas meter cock and/or appliance isolating cock completely.
Remove aluminium foil.
Wash burner head warm water with detergent. Leave it on dry and place back in correct position.
Refit burner head into burner body.
TROUBLE SHOOTING MANUAL FOR RINNAI
Push and turn gas control knob anti-clockwise until a “click” sound is heard. Hold for a few second until flame is ignited
Loading...
+ 2 hidden pages