Rinnai ORH15SR, ORH18MR, ORH24LR, ORH32XLR User Manual

Models:
ORH15SR ORH18MR ORH24LR ORH32XLR
Outdoor Radiant Heater
Operation & Installation Manual
• Manufacturer’s Installation Instructions
• Current AS/NZS 3000
• Local Regulations and Municipal Building Codes including local OH&S requirements
This appliance must be installed, maintained and removed only by an Authorised Person�
For continued safety of this appliance it must be installed and maintained in accordance with the manufacturer’s instructions�
Rinnai 2 ORH OIM
TABLE OF CONTENTS
Warnings and Important Information 4
About Your Outdoor Radiant Heater 7
Radiant Heating Principles ��������������������������������������������������������������������������������������������������������������������������������� 7
Features ������������������������������������������������������������������������������������������������������������������������������������������������������������� 7
Specications  ����������������������������������������������������������������������������������������������������������������������������������������������������� 7
General Design Layout / Carton Contents  ��������������������������������������������������������������������������������������������������������� 8
Operation  ������������������������������������������������������������������������������������������������������������������������������������������������������������ 8
Installation 9
Delay o󰀨 Timer  ���������������������������������������������������������������������������������������������������������������������������������������������������9
Remote Control Batteries  ����������������������������������������������������������������������������������������������������������������������������������� 9
Regulatory Requirements  ��������������������������������������������������������������������������������������������������������������������������������� 10
Unpacking �������������������������������������������������������������������������������������������������������������������������������������������������������� 10
Approximate Heating Area  �������������������������������������������������������������������������������������������������������������������������������10
Outdoor Radiant Heater Mounting  ������������������������������������������������������������������������������������������������������������������� 10
Clearances  ������������������������������������������������������������������������������������������������������������������������������������������������������� 11
Installation Method  ������������������������������������������������������������������������������������������������������������������������������������������� 12
Care & Maintenance 13
Electrical Connections  �������������������������������������������������������������������������������������������������������������������������������������� 13
Location of Electrical Connection  ��������������������������������������������������������������������������������������������������������������������� 13
Multiple Installations  ����������������������������������������������������������������������������������������������������������������������������������������� 13
Cleaning  ����������������������������������������������������������������������������������������������������������������������������������������������������������� 14
Save A Service Call  ������������������������������������������������������������������������������������������������������������������������������������������ 14
When to Call for Service  ����������������������������������������������������������������������������������������������������������������������������������� 14
Warranty 15
Contacts 20
Rinnai 3 ORH OIM
IMPORTANT
WARNING
WARNINGS AND IMPORTANT INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
Always comply with the following precautions to avoid dangerous situations and to ensure optimum performance.
Failure to carefully read and follow all instructions in this manual can result in equipment malfunction, property damage, personal injury and/or death.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in personal injury or death.
WARNINGS: Indicates a potentially hazardous situation which, if not avoided, could result in personal injury or death.
CAUTIONS: Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury or damage to the appliance. It may also be used to alert against unsafe practices.
REGULATORY / INSTALLATION
This appliance shall be installed in accordance with:
Manufacturer’s Installation Instructions.
Current  AS/NZ 3000. 
It  is important that  the  following  precautions  are  followed  to  minimise  the  risk  of  overheating,  re,  electric shock and injury: 
The appliance MUST BE installed at least 2.1m above the oor.
Handle the  appliance  with  care,  avoid vibrations  and  knocks.  Unpack  the  appliance  and check  for  damage. DO NOT INSTALL A DAMAGED APPLIANCE. If the appliance is damaged or defective,  contact your  supplier  for  advice, the  appliance  may  ONLY  be  serviced by  the  manufacturer  or the  manufacturer’s agent or similarly qualied person.
DO NOT  install  or  use  the  appliance  if  the  power  cord  is  damaged.  If  it  is  damaged  or  requires  replacing, it must be replaced by the manufacturer or the manufacturer’s agent or similarly qualied  person.
Ensure that the voltage and frequency of the power supply correspond to the ratings on the data plate  of the appliance. 
Models ORH15SR, ORH18MR and ORH24LR are tted with an Australian exible 1m cord and 3 pin  plug. A dedicated 240V 50Hz earthed 10 Amp power point must be used with this appliance. 
Model ORH32XLR are tted with an Australian exible 1m cord and 3 pin plug. A dedicated 240V 50Hz  earthed 15 Amp power point must be used with this appliance. 
DO NOT use power boards or double adaptors for this appliance.
This appliance MUST NOT be located immediately below or directly in front of a power point / electrical  connection. The power point / electrical connection is to be within 1m of the appliance, yet should be  located  outside  the  physical  footprint  of  the  unit  to  prevent  exposure  to  heat  build-up  behind  the 
appliance�
If the heater is to be mounted on an incline such as a vaulted ceiling, ensure the power point / electrical  connection is located at that lowest point of the appliance (see page 11 for details).
The appliance  may be direct wired  ONLY by a  licensed electrical trades person in accordance with  local regulations.
The appliance should be connected to an electric circuit equipped with an automatic circuit breaker.
DO NOT connect the appliance to the mains power until it has been installed in its nal location and  adjusted to the position it will be used in.
The installation  MUST BE equipped with  an  all-pole  disconnection mechanism in accordance  with  wiring rules.
Rinnai 4 ORH OIM
WARNING
WARNINGS AND IMPORTANT INFORMATION
The electrical  cord MUST NOT come  into contact with the  heated parts of the  appliance.  DO NOT unplug the appliance by pulling on the exible cord. 
DO NOT coil or bundle the electric cord to reduce its length as overheating of the cord may occur  which could result in a re hazard. 
Use of an extension cord on this appliance is not recommended. The appliance is  NOT intended to  be used as a portable heater. 
This appliance MUST NOT be installed where curtains or other combustible materials could come into  contact or in close proximity with it. In some cases curtains may need restraining. 
When installed outdoors this appliance is suitable for under cover use ONLY
DO NOT place articles or on or against this appliance.
DO NOT place any items of clothing, hand towels or similar over the appliance to dry.
DO NOT spray aerosols in the vicinity of this appliance whilst the appliance is operating. Most aerosols 
contain ammable gas, which can be a re hazard if used near the appliance when it is in use.
DO NOT use or store ammable materials, liquids, etc. near this appliance.  Combustible  materials  must not be placed where the appliance could ignite them.
DO NOT use the appliance in areas where the presence of ammable dust particulates may cause  an explosion.
Do not use the appliance, in a green house, barn or stable or on a on a building site or where ammable  dust may be present. 
DO NOT use this appliance in the place of animal propagating areas.
DO NOT use the appliance as a sauna heater.
DO NOT leave the appliance unattended whilst in operation.
CAUTION when being operated the surfaces of this appliance will get VERY HOT - DO NOT TOUCH ANY PART OF THE APPLIANCE WHILE IT IS TURNED ON. To avoid burns, DO NOT touch the 
any surface  of  the  appliance  with  any  body part.  The  appliance must  be  located  in  a  position  that  prevents contact by any person (including accidental).
The appliance will retain signicant heat for a period after shut down. To avoid burns, DO NOT touch  the any surface of the appliance with any body part during this period.
This appliance is not intended for use by persons (including children) with reduced physical, sensory  or mental capabilities or lack of experience and knowledge, unless they have been given supervision  or instruction concerning use of the appliance  by a person responsible for their safety and have the  capacity to follow those instructions.
The appliance is not intended for use by young children or inrm persons without supervision.
Young Children must be supervised when in the vicinity of this appliance while it is in operation.
This appliance is  NOT  equipped  with  a device to  control  the  room temperature.  DO NOT use this  appliance  in  small  rooms  (see “Approximate Heating Area” on page 8) when they are occupied  by  persons not capable of leaving the room on their own, unless constant supervision is provided.
DO NOT allow young children or the inrm to remain unsupervised or sleep directly in front of or below  the appliance while in operation.
NO USER SERVICEABLE PARTS - NEVER  dismantle  the  appliance.  Tampering  with  electrical  connections and components is highly dangerous and can result in equipment malfunction, property  damage, personal injury and/or death.
DO NOT modify  this  appliance.  Modifying  from  original  specications  may  create  a  dangerous  situation and will void your warranty.
Rinnai  5  ORH OIM
IMPORTANT
MANDATORY INSPECTION PRIOR TO INSTALLATION
NOTE
Immediately report any damage or discrepancies to your appliance supplier. This appliance has been  inspected and  tested  at the  time  of  manufacture  and packaging,  and  was released  for  transportation  without known damage. Upon receipt,  inspect the exterior for evidence of rough handling in shipment.  Ensure  that  the  appliance  is  labelled  correctly  for  the  gas  and  electrical  supply  it  is  intended  to  be  connected to.   
For safety and warranty purposes, appliances that may be damaged or incorrect must not be installed  or operated under any circumstances.  No responsibility will be accepted for installation or operation of  damaged or incorrect appliances.  Installation of damaged or incorrect appliances may also contravene  local regulations.
A NOTE ON ILLUSTRATIONS
The illustrations used in this manual are for explanatory purposes only and the shape of your unit may  vary slightly from that which is shown in this manual. 
Rinnai 6 ORH OIM
Loading...
+ 14 hidden pages