Rinnai JEPH-10DTW, JEPH-15DTW, JEPH-22DTW Customer Operation & Installation Manual

For safe and reliable operation and optimum performance this appliance must be operated, installed and maintained in accordance with these instructions. Read these instructions thoroughly before attempting installation and operation. Keep these instructions handy for future reference.
Customer Operation &
Installation Manual
Electric Panel Heaters
MODELS: JEPH-10DTW / JEPH-15DTW / JEPH-22DTW
Rinnai Australia i Operation Manual
WARRANTY, FEATURES & SPECIFICATIONS
SPECIFICATIONS
WARRANTY
The benefits to the consumer given by this warranty are in addition to all other rights and remedies of the consumer under a law in relation to the goods or services to which the warranty relates.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for c ompensation for any ot her loss or damage. You ar e also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the fa ilure does not amount to a major failure.
This heater has a 7 year parts warranty from date of pur chase. If th e product fails within this 7 year period return it to the supplier with proof of purchase for repair or replacement.
Supplier warranty claims for Rinnai products or services must be made by contacting Rinnai Australia. Contact details are on the back of this document.
The following exclusions may cause the warranty to become void and may result in a service charge and costs of parts (if required):
1. Accidental damage and acts of God.
2. Failure due to abuse or misuse, improper maintenance, failure to maintain or improper storage.
3. Failure due to incorrect or unauthorised installations or outdoors use.
4. Failure or damage caused by alterations, service or repair work carr ied out by persons other than Rinnai service persons or service agents.
5. Where it is found that there is no fault with the appliance and the issue is related to the installation or is due to the failure of electricity supply.
FEATURES
This heater uses electricity as the heating medium . It o per ates on the ‘natural convection’ principle where air from the room is drawn into the ‘air inlet’ louvres at the base of the appliance, is heated inside the appliance and expelled through the ‘air outlet’ louvres at the top of the appliance without the use of fans. A sophisticated thermostatic system keeps the room close to the selected temperature.
DIY INSTALLATION This heater is suitable for Do It Yourself installation. SILENT OPERATION Electric element operation eliminates fan noise. DRAFT FREE Non fan operation also means no drafts. LOW MAINTENANCE No moving parts makes for virtually maintenance free operation. DELAY OFF TIMER FUNCTION Equipped with delay off timer, which can be set in 1 hour increments
from 1 to 24 hours.
‘TAMPER RESISTANT’ OPERATION Includes a Lock function designed to prevent accidental operation and
small children from altering the heater settings.
Model JEPH-22DTW JEPH-15DTW JEPH-10DTW
Rated Power 2200 Watt 1500 Watt 1000 Watt
Rated Voltage 240V ~ 50Hz
Dimensions
Height
Width Depth
440mm
1000mm
105mm
440mm 580mm 105mm
440mm 420mm 105mm
Weight 7.8kg 5.1kg 4.1kg
Installation Options Wall/Freestanding Wall/Freestanding Wall/Freestanding
Rinnai Australia ii Operation Manual
WARRANTY, FEATURES & SPECIFICATIONS ....................................................................................... i
WARRANTY.............................................................................................................................................................i
FEATURES..............................................................................................................................................................i
SPECIFICATIONS...................................................................................................................................................i
SAFETY & IMPORTANT POINTS............................................................................................................. 1
UNPACKING THE APPLIANCE ............................................................................................................................ 1
WHAT’S IN THE BOX............................................................................................................................................ 1
SAFETY................................................................................................................................................................. 1
HOW TO OPERATE THE HEATER .......................................................................................................... 2
GENERAL DESIGN LAYOUT................................................................................................................................ 2
MANUAL OPERATION.......................................................................................................................................... 3
DELAY OFF TIMER OPERATION......................................................................................................................... 4
ANTI-FROST PROTECTION FUNCTION ............................................................................................................. 5
ELECTRONIC LOCK FUNCTION............. ... ... .... ... .......................................... ... ... ... .... ... ... ................................... 5
CARE AND MAINTENANCE..................................................................................................................... 6
CARE OF THE HEATER ....................................................................................................................................... 6
SERVICE AND REPAIR ........................................................................................................................................ 6
DISPOSAL............................................................................................................................................................. 6
INSTALLATION......................................................................................................................................... 7
GENERAL.............................................................................................................................................................. 7
WALL INSTALLATION................................. ... .... ... ... ... ... .... .......................................... ... ... ... ... ............................. 7
FREESTANDING INSTALLATION ........................................................................................................................ 8
CONTACT INFORMATION........................................................................................................................ 9
TABLE OF CONTENTS
Rinnai Australia 1 Operation Manual
SAFETY & IMPORTANT POINTS
UNPACKING THE APPLIANCE
If any damage is evident DO NOT INSTALL or OPERATE and contact your supplier for advice.
WHAT’S IN THE BOX
The package should contain: Heater fitted with flexible cord and plug.
A plastic bag containing the Operating and Installation Instructions and mounting screws. Two plastic bags containing four castors, two castor brackets and two clips.
SAFETY
It is important the following precautions are followed to minimise the risk of overheating, fire, electric shock and injury.
• The heater is fitted with an Australian flexible cord and 2 pin plug intended for connection to an Australian 10 Amp socket outlet. It is not suitable for connection in other countries or alternative power supplies. Ensure that the voltage and frequency of the power supply correspond to the ratings on the dataplate of the appliance.
• This heater must not be located immediately below or directly in front of a socket-outlet.
• The heater may be direct wired only by a licensed electrical trade s person in accordance with local regulations.
• This heater is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Young children should be supervised to ensure they do not play with the appliance.
• DO NOT allow children or persons with reduced physical, sensory or mental capabilities to sleep directly in front of the heater.
• DO NOT allow children to ‘post articles’ into the louvres of the heater.
• The electrical cord must not come into contact with the heated parts of the heater.
• DO NOT use power boards or double adaptors with this heater.
• DO NOT coil or bundle the electric cord to reduce it’s length as overheating of the cord may occur which could result in a fire hazard.
• The flexible cord and plug must not be modified. If the cord or plug are damaged, they must be replaced by Rinnai or a Rinnai appointed service agent.
• DO NOT cover or place articles on or against any parts of this heater, to avoid overheating.
• DO NOT sit on this heater.
• If used as a portable heater, do not use in the immediate surroundings of a bath, a shower or a swimming pool.
• If used as a portable heater, unplug and allow to cool before placing in storage.
• If used as a portable heater, do not move whilst it is turned on.
• DO NOT unplug the heater by pulling on the flexible cord.
• DO NOT handle any parts of the heater, including the plug and flexible cord, with wet or damp hands.
• DO NOT immerse the appliance, flexible cord and plug in water or any other liquid.
• DO NOT place containers of any liquid or wax on top of the heater.
• Turn off the appliance and unplug from the power socket outlet when not in use.
• DO NOT use in areas where flammable liquids are stored.
• This appliance is suitable for indoor use only.
• Never dismantle the appliance. Tampering with electrical connections and components is h ighly dangerous and may cause appliance malfunction.
IMPORTANT
Loading...
+ 8 hidden pages