Rinnai EX08c, EX11c, EX22c, EX17c, ES38 Brochure & Specs

...
Page 1
ENERGYSAVER® diREct VENt wAll fuRNAcES
a new approach to heating
ENERGY-EFFICIENT dIRECT vENT WALL FuRNACEs
Page 2
When winter sets in, there are certain rooms that are used less because of cold spots. However, with the consistent and even
intelligent heating solutions...
Continuous-Run Modulating Technology
Gas Usage Gas Usage Gas Usage
74° F
72° F
70° F
68° F
66° F
heat provided by a Rinnai Direct Vent Wall Furnace, you can enjoy comfortable heat anywhere, all winter long.
Benets of the “C Series” at a Glance
• Modern cabinet design
• User-friendly controls
• Standby power of less than 1 watt
• Programmable thermostat (Celsius or Fahrenheit) with timer function
• Setback plus frost protection
• Gas type field convertible
• Auto restart
• Quiet operation
• Approved for use in high altitudes of up to 10,200 feet
Ultra Efcient Heating Solution
The Rinnai Direct Vent Wall Furnace’s reputation lies in its ability to extract up to 83% AFUE efficiency through the use of a unique stainless steel heat exchanger, modulating gas valve and variable­speed blower. Whether it’s a whole-house or zone-heating solution, the Rinnai Wall Furnace will provide a comfortable living environment, reduce energy consumption and lower operating costs compared to a traditional furnace.
Advanced Safety Features
• “Cool-to-the-touch” cabinet makes them safe for whole family
• Sealed combustion – protects indoor air quality
• Furnace automatically shuts down if vent is obstructed or blocked
• Child safety lock
• Electronic ignition – no pilot light
• Wind tunnel tested venting systems
• On-board self diagnostics for easier maintenance
Newly Designed, User Friendly
>>
Control panel for EX08C / EX11C / EX17C / EX22C and EX22CW
>>
Control panel for ES38 / ES38CW
With the new user-friendly control panel, you can choose a set temperature or program the timers to take total control over your heating needs.
Product Applications
Enjoy comfortable heat in any type of:
• Room Addition or Sunroom
• Multifamily Housing
• Basement Remodel
EX08C / EX11C
(ideal output for
smaller areas)
EX17C
(ideal output for mid-sized areas)
EX22C / EX22CW (EX22CW shown)
(ideal output for mid-to-
larger-sized areas)
ES38
(ideal output for mid-to-
larger-sized areas)
• Condo or Loft
• Cabin, Lake or Vacation Home
• Electric-to-Gas Conversion Project
• Manufactured or Mobile Home
Page 3
HOW IT WORKS
Continuous-Run Modulating Technology
Gas Usage Gas Usage Gas Usage
74° F
72° F
70° F
68° F
66° F
Temperature-Sensing Thermistor
• Consistently monitors room temperature 2” off the floor
• Accurately detects temperature changes less than one degree
Rinnai Response
• Within 10 seconds, the Rinnai wall furnace begins to gently heat the room at low fan speed
• It increases fan speed and BTU output if necessary to achieve the desired temperature
• Once the desired temperature is achieved, the furnace goes into standby mode
Room Monitoring
• As the temperature of the room gradually drops, the wall furnace restarts and gradually warms the room back to the desired temperature
• If there is a sudden injection of cold air, the furnace automatically adjusts fan speed and BTUs to quickly restore the set temperature
Modulation Technology
Modulating technology replaces only the heat escaping the structure by continuously operating at heating levels based on the current demand, which leads to lower gas usage and higher levels of comfort.
TRADITIONAL VS RINNAI APPROACH TO HEATING
The Traditional Approach
• Higher operating costs
• Large fluctuations in room temperature
• Slow response to thermostatically controlled heat settings
• Poor distribution of the heat provided through leaky ducts
Venting Made Safe and Easy
Rinnai venting uses outside air which improves indoor air quality. It is easy to install and can be vented up to 13 feet.
Discrete Vent Terminal, only 4” in diameter
Direct, Through­Wall Vent Termination
Through-Wall Vent Termination with Extension Kit
The Rinnai Approach
• Energy-efficient and economical zone or whole-house heating
• Wall furnace quickly adapts to small temperature changes
• Modulating blower and gas valve automatically adjust to individual heating needs, providing comfortable, consistent temperature from ceiling to floor
• No ductwork required
ICC-ES® PMG Listings certify that plumbing, mechanical and fuel gas products meet requirements in codes and standards.
Through-Wall Vent Termination with Extension Kit and Elbow
For illustration only. Please reference the Owner’s Manual for installation requirements.
Page 4
product specifications
generated at BeQRious.com
Model Number Gas
EX08C (RHFE202FTA) Beige only
EX11C (RHFE265FTA) Beige only
EX17C (RHFE434FTA) Beige only
EX22C (RHFE559FTA) Beige
EX22CW (RHFE559FTA-W) White
ES38 (RHFE1004FTA) Beige
ES38W (RHFE1004FTA-W) White
Type
NG
LP 83%
NG 5,500 / 11,000 81%
LP 5,700 / 11,000 82%
NG
LP 82%
NG 8,200 / 21,500 81%
LP 8,200 / 20,700 82%
NG 10,500 / 38,400 80%
LP 10,500 / 36,500 81%
* This specification is for shipping weight.
Accessories for Flexible Installations
Product Warranty
• 10 years on the heat exchanger
• 5 years on parts
• 2 years on labor
ACCESSORIES
MODEL EXTENSION KITS COVER KITS
FOT-
FOT-
156
FOT-
157
155
EX11C
EX17C
EX22C / EX22CW
ES38
Input Range (BTU)
(Low/High)
3,000 / 8,000
8,200 / 16,700
VENT TERMINATIONS
Part Number
FOT-150 S Vent (3” – 4 1/2”)
FOT-151 A Vent (4 1/2” - 9 1/2”)
FOT-152 B Vent (9 1/2” - 15 3/4”)
FOT-153 C Vent (15 3/4” – 23 5/8”)
FOT-154 D Vent (23 5/8” – 31 1/2”)
FOT-
FOT-
FOT-
158
190
201
FOT-
219
FOT-
220
AFUE
Rating
82%
81%
FOT-
221
Fan CFM Output
(Low / High)
48.3 / 78.6
96.4 / 128.5
110.5 / 141.3
110.5 / 162.7
230.4 / 360.5 36 5/8” x 26 3/8” x 13” 90
Description
FOT-
FOT-
FOT-
102
103
114
FOT-
115
Dimensions
(W x H x D)
18 1/4” x 27 3/8” x 10 1/8” 46
29 7/8” x 22 7/8” x 10 1/8” 57
CONVERSION KITS
Model To NG To LP
EX08C 204000033 204000037
EX11C 204000034 204000038
EX17C 204000035 204000039
EX22C / EX22CW
ES38/ ES38W
FOT-
132
204000036 204000040
204000026 204000027
FOT-
FOT-
134
FOT-
140
133
Wt.
(lbs.)*
FOT-
141
FOT-
142
Rinnai is continually updating and improving products; therefore, specifications are subject to change without prior notice. Local, state, provincial and federal codes must be adhered to prior to and upon installation.
FOR MORE INFORMATION ON RINNAI PRODUCTS ADDITIONAL RINNAI LITERATURE AVAILABLE
SCAN WITH YOUR SMARTPHONE
CONDENSING BOILERS RINNAI INtELLIGENt
fIREpLACES
RINNAI hyDRONIC
fURNACES
Rinnai America Corporation
103 International Drive
Peachtree City, GA 30269
Toll Free 1-800-621-9419
Phone: 678-829-1700 • Fax: 678-364-8643
Visit our Web site: www.rinnai.us
E-mail: marketing@rinnai.us
R-CNHT-E-01 r9 © 2012 Rinnai America Corporation 40M-01/2012
Page 5
ENERGYSAVER® diREct VENt wAll fuRNAcES
a new approach to heating
ENERGY-EFFICIENT dIRECT vENT WALL FuRNACEs
Loading...