Ring Video Doorbell Installations

VIDEO DOORBELL

Quick Install Guide

TABLE OF CONTENTS

COMPONENTS..................................................... 4

TECH SPECS......................................................... 6

BATTERY CHARGING......................................... 7

WI-FI SETUP ........................................................ 8

INSTALLATION..................................................... 8

HARDWIRING ...................................................... 9

ANSWERING A CALL......................................... 10

3

FRONT

1. Wide Angle HD Camera

2. Microphone

3. LED Ring

4. Push Button

5. Speakers

4

1

2

3

4

5

BACK

5

6

7

MAC ID: XXXXXXXXXXX

Product name: Ring
Model name: Video Doorbell

FCC ID: YOPGS1011MEE
Power input: 8-24 VAC, 5Vdc 1 A

S/N: XXXXXXXXXXX

6. Setup / Reset Button

7. Micro USB Port

8. MAC Address

8

MOUNTING BRACKET

9. Wire Terminals

10. Mounting Hooks

11. Wire Management Hooks

6

9

10

11

BATTERY CHARGING

Charge your device using a USB-compatible
wall charger or laptop. To ensure your device is
fully charged, charge the device prior to Wi-Fi
setup and installation.

LED RING LIGHTING SEQUENCES

7

Call Initiated

Call Connected

Battery Charging

Battery Charging
Complete

Setup Mode

Software Update

Factory Reset

LED Ring
spins blue.

LED Ring stays
fully lit blue.

LED Ring spins
blue, then white.

LED Ring stays
fully lit blue.

LED Ring
spins white.

LED Ring
blinks white.

LED Ring
blinks blue.

WI-FI SETUP

Download the Ring app from the App
Store or Google Play. Open the Ring app
and select Setup Device. Follow the
in-app instructions to set up your Ring.

INSTALLATION

1. Remove doorbell button and power off your
transformer (for wired installation only).

2. Fill the hole left in your wall with the provided caulking cord
(for wired installation only).

3. Line up the mounting bracket using the provided mounting
level.

4. Install the mounting bracket using the provided screwdriver
bit, handle and drill bit.

Brick - use concrete screws and anchors
Concrete - use concrete screws and anchors
Stucco - use concrete screws and anchors
Wood - use wood screws
Vinyl - use wood screws

5. Remove the mounting level.

6. Connect your doorbell wiring to the terminal screws
located on the mounting bracket (for wired installation only).

7. Place the device on the mounting bracket.

8. Tighten the security screws at the bottom of the device using
the propietary screwdriver bit.

9. Provide power back to your transformer
(for wired installation only).

8

HARDWIRING REQUIREMENTS

If powering off doorbell wiring, the wiring must
be connected to a transformer and a doorbell
with a voltage of 8VAC - 24VAC to ring your
doorbell chime.

If your chime is electronic, you may need to install a diode,
check with your doorbell manufacturer. Connect the diode to
the terminals with the arrow faced towards the doorbell chime.

TransformerDoorbell Chime

Transformer

Front

Rear

AC

IN

9

ANSWERING A CALL

Mute Volume

Disable Microphone

End Call

Integration Menu

To disable notications for your Ring device,
select it from “My Devices”. Select “Device
Settings” and toggle notications off.

10

CUSTOMER SUPPORT

For additional product information and helpful
tips, check out our support forum at:

https://ring.zendesk.com/hc/en-us

For immediate assistance, please call us at:

Domestic: 1-800-656-1918
International: [phone]

7 days a week
9 a.m. to 5 p.m. PST.

1523 26th St.

Santa Monica, CA 90404

11